Nanoantennas and their arrays (metasurfaces) provide a versatile platform for controlling the coherence of thermal emission. Conventional designs rely on global heating, which impedes emission efficiency and on-chip integration. In this work, we propose an electrically driven metasurface composed of a Yagi-Uda nanoantenna array interconnected by S-shaped electrode wires, which enables the concurrent manipulation of thermal emission spectrally and directionally. A direct simulation approach based on the Wiener-chaos expansion method is employed for quantitative analysis. Our metasurface device exhibits a narrowband emission with high directivity, which is one order higher than that of a single nanorod antenna case. The modeling framework established in this work opens a promising route for realizing coherent mid-infrared emission by metasurfaces.
Metasurfaces consisting of an array of planar sub-wavelength structures have shown great potentials in controlling thermal infrared radiation, including intensity, coherence, and polarization. These capabilities together with the two-dimensional nature make thermal metasurfaces an ultracompact multifunctional platform for infrared light manipulation. Integrating the functionalities, such as amplitude, phase (spectrum and directionality), and polarization, on a single metasurface offers fascinating device responses. However, it remains a significant challenge to concurrently optimize the optical, electrical, and thermal responses of a thermal metasurface in a small footprint. In this work, we develop a center-contacted electrode line design for a thermal infrared metasurface based on a gold nanorod array, which allows local Joule heating to electrically excite the emission without undermining the localized surface plasmonic resonance. The narrowband emission of thermal metasurfaces and their robustness against temperature nonuniformity demonstrated in this work have important implications for the applications in infrared imaging, sensing, and energy harvesting.
more » « less- Award ID(s):
- 1931964
- NSF-PAR ID:
- 10439898
- Publisher / Repository:
- American Institute of Physics
- Date Published:
- Journal Name:
- Applied Physics Letters
- Volume:
- 121
- Issue:
- 13
- ISSN:
- 0003-6951
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
more » « less
Plasmonic metasurfaces with adjustable optical responses can be achieved through phase change materials (PCMs) with high optical contrast. However, the on–off behavior of the phase change process results in the binary response of photonic devices, limiting the applications to the two-stage modulation. In this work, we propose a reconfigurable metasurface emitter based on a gold nanorod array on a VO2 thin film for achieving continuously tunable narrowband thermal emission. The electrode line connecting the center of each nanorod not only enables emission excitation electrically but also activates the phase transition of VO2 beneath the array layer due to Joule heating. The change in the dielectric environment due to the VO2 phase transition results in the modulation of emissivity from the plasmonic metasurfaces. The device performances regarding critical geometrical parameters are analyzed based on a fully coupled electro-thermo-optical finite element model. This new metasurface structure extends the binary nature of PCM based modulations to continuous reconfigurability and provides new possibilities toward smart metasurface emitters, reflectors, and other nanophotonic devices.
-
more » « less
Abstract As 2D metamaterials, metasurfaces provide an unprecedented means to manipulate light with the ability to multiplex different functionalities in a single planar device. Currently, most pursuits of multifunctional metasurfaces resort to empirically accommodating more functionalities at the cost of increasing structural complexity, with little effort to investigate the intrinsic restrictions of given meta‐atoms and thus the ultimate limits in the design. In this work, it is proposed to embed machine‐learning models in both gradient‐based and nongradient optimization loops for the automatic implementation of multifunctional metasurfaces. Fundamentally different from the traditional two‐step approach that separates phase retrieval and meta‐atom structural design, the proposed end‐to‐end framework facilitates full exploitation of the prescribed design space and pushes the multifunctional design capacity to its physical limit. With a single‐layer structure that can be readily fabricated, metasurface focusing lenses and holograms are experimentally demonstrated in the near‐infrared region. They show up to eight controllable responses subjected to different combinations of working frequencies and linear polarization states, which are unachievable by the conventional physics‐guided approaches. These results manifest the superior capability of the data‐driven scheme for photonic design, and will accelerate the development of complex devices and systems for optical display, communication, and computing.
-
more » « less
Optical phase-change materials exhibit tunable permittivity and switching properties during phase transition, which offers the possibility of dynamic control of optical devices. Here, a wavelength-tunable infrared chiral metasurface integrated with phase-change material GST-225 is demonstrated with the designed unit cell of parallelogram-shaped resonator. By varying the baking time at a temperature above the phase transition temperature of GST-225, the resonance wavelength of the chiral metasurface is tuned in the wavelength range of 2.33 µm to 2.58 µm, while the circular dichroism in absorption is maintained around 0.44. The chiroptical response of the designed metasurface is revealed by analyzing the electromagnetic field and displacement current distributions under left- and right-handed circularly polarized (LCP and RCP) light illumination. Moreover, the photothermal effect is simulated to investigate the large temperature difference in the chiral metasurface under LCP and RCP illumination, which allows for the possibility of circular polarization-controlled phase transition. The presented chiral metasurfaces with phase-change materials offer the potential to facilitate promising applications in the infrared regime, such as chiral thermal switching, infrared imaging, and tunable chiral photonics.
-
more » « less
Abstract Metasurface‐based optical elements offer a wide design space for miniature and lightweight optical applications. Typically, metasurface optical elements transform an incident light beam into a desired output waveform. Recent demonstrations of light‐emitting metasurfaces highlight the potential for directly producing desired output waveforms via metasurface‐mediated spontaneous emission. In this work, reciprocal finite‐difference time‐domain (FDTD) simulations and machine learning are used to enable the inverse design of highly unidirectional photoluminescent III‐Nitride quantum well metasurfaces capable of directive
p ‐,s ‐, or combinedp ‐ ands ‐ polarized emission at arbitrary angles. In comparison with previous intuition‐guided designs using the same quantum well architectures, the inverse design approach enables new polarization capabilities and experimentally demonstrated improvements in directivity of 54%. An analysis of ways in which the inverse design both validates and contradicts previous intuition‐guided design heuristics is presented. Ultimately, the combination of reciprocal simulations and efficient global optimization (EGO) grants remarkable improvements in emission directivity and results in full control over the polarization and momentum of emitted light, including simultaneous directional emission ofs ‐ andp ‐polarized light.
