An official website of the United States government
The 5G user plane function (UPF) is a critical inter-connection point between the data network and cellular network infrastructure. It governs the packet processing performance of the 5G core network. UPFs also need to be flexible to support several key control plane operations. Existing UPFs typically run on general-purpose CPUs, but have limited performance because of the overheads of host-based forwarding. We design Synergy, a novel 5G UPF running on SmartNICs that provides high throughput and low latency. It also supports monitoring functionality to gather critical data on user sessions for the prediction and optimization of handovers during user mobility. The SmartNIC UPF efficiently buffers data packets during handover and paging events by using a two-level flow-state access mechanism. This enables maintaining flow-state for a very large number of flows, thus providing very low latency for control and data planes and high throughput packet forwarding. Mobility prediction can reduce the handover delay by pre-populating state in the UPF and other core NFs. Synergy performs handover predictions based on an existing recurrent neural network model. Synergy's mobility predictor helps us achieve 2.32× lower average handover latency. Buffering in the SmartNIC, rather than the host, during paging and handover events reduces packet loss rate by at least 2.04×. Compared to previous approaches to building programmable switch-based UPFs, Synergy speeds up control plane operations such as handovers because of the low P4-programming latency leveraging tight coupling between SmartNIC and host.
more »
« less
L 2 5GC: a low latency 5G core network based on high-performance NFV platforms
Cellular network control procedures (e.g., mobility, idle-active transition to conserve energy) directly influence data plane behavior, impacting user-experienced delay. Recognizing this control-data plane interdependence, L25GC re-architects the 5G Core (5GC) network, and its processing, to reduce latency of control plane operations and their impact on the data plane. Exploiting shared memory, L25GC eliminates message serialization and HTTP processing overheads, while being 3GPP-standards compliant. We improve data plane processing by factoring the functions to avoid control-data plane interference, and using scalable, flow-level packet classifiers for forwarding-rule lookups. Utilizing buffers at the 5GC, L25GC implements paging, and an intelligent handover scheme avoiding 3GPP's hairpin routing, and data loss caused by limited buffering at 5G base stations, reduces delay and unnecessary message processing. L25GC's integrated failure resiliency transparently recovers from failures of 5GC software network functions and hardware much faster than 3GPP's reattach recovery procedure. L25GC is built based on free5GC, an open-source kernel-based 5GC implementation. L25GC reduces event completion time by ~50% for several control plane events and improves data packet latency (due to improved control plane communication) by ~2×, during paging and handover events, compared to free5GC. L25GC's design is general, although current implementation supports a limited number of user sessions.
more »
« less
- Award ID(s):
- 1823270
- PAR ID:
- 10384984
- Date Published:
- Journal Name:
- SIGCOMM '22: Proceedings of the ACM SIGCOMM 2022 Conference
- Page Range / eLocation ID:
- 143 to 157
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
With the commercialization and deployment of 5G, efforts are beginning to explore the design of the next generation of cellular networks, called 6G. New and constantly evolving use cases continue to place performance demands, especially for low latency communications, as these are still challenges for the 3GPP-specified 5G design, and will have to be met by the 6G design. Therefore, it is helpful to re-examine several aspects of the current cellular network’s design and implementation.Based on our understanding of the 5G cellular network specifications, we explore different implementation options for a dis-aggregated 5G core and their performance implications. To improve the data plane performance, we consider advanced packet classification mechanisms to support fast packet processing in the User Plane Function (UPF), to improve the poor performance and scalability of the current design based on linked lists. Importantly, we implement the UPF function on a SmartNIC for forwarding and tunneling. The SmartNIC provides the fastpath for device traffic, while more complex functions of buffering and processing flows that suffer a miss on the SmartNIC P4 tables are processed by the host-based UPF. Compared to an efficient DPDK-based host UPF, the SmartNIC UPF increases the throughput for 64 Byte packets by almost 2×. Furthermore, we lower the packet forwarding latency by 3.75× by using the SmartNIC. In addition, we propose a novel context-level QoS mechanism that dynamically updates the Packet Detection Rule priority and resource allocation of a flow based on the user context. By combining our innovations, we can achieve low latency and high throughput that will help us evolve to the next generation 6G cellular networks.more » « less
-
While 5G offers fast access networks and a high-performance data plane, the control plane in 5G core (5GC) still presents challenges due to inefficiencies in handling control plane operations (including session establishment, handovers and idle-to-active state-transitions) of 5G User Equipment (UE). The Service-based Interface (SBI) used for communication between 5G control plane functions introduces substantial overheads that impact latency. Typical 5GCs are supported in the cloud on containers, to support the disaggregated Control and User Plane Separation (CUPS) framework of 3GPP. L25GC is a state-of-the-art 5G control plane design utilizing shared memory processing to reduce the control plane latency. However, L25GC has limitations in supporting multiple user sessions and has programming language incompatibilities with 5GC implementations, e.g., free5GC, using modern languages such as GoLang. To address these challenges, we develop L25GC+, a significant enhancement to L25GC. L25GC+ re-designs the shared-memory-based networking stack to support synchronous I/O between control plane functions. L25GC+ distinguishes different user sessions and maintains strict 3GPP compliance. L25GC+ also offers seamless integration with existing 5GC microservice implementations through equivalent SBI APIs, reducing code refactoring and porting efforts. By leveraging shared memory I/O and overcoming L25GC’s limitations, L25GC+ provides an improved solution to optimize the 5G control plane, enhancing latency, scalability, and overall user experience. We demonstrate the improved performance of L25GC+ on a 5G testbed with commercial basestations and multiple UEs.more » « less
-
Software Defined Networking (SDN) and Network Function Virtualization (NFV) are transforming Data Center (DC), Telecom, and enterprise networking. The programmability offered by P4 enables SDN to be more protocol-independent and flexible. Data Centers are increasingly adopting SmartNICs (sNICs) to accelerate packet processing that can be leveraged to support packet processing pipelines and custom Network Functions (NFs). However, there are several challenges in integrating and deploying P4 based SDN control as well as host and sNIC-based programmable NFs. These include configuration and management of the data plane components (Host and sNIC P4 switches) for the SDN control plane and effective utilization of data plane resources. P4NFV addresses these concerns and provides a unified P4 switch abstraction framework to simplify the SDN control plane, reducing management complexities, and leveraging a host-local SDN Agent to improve the overall resource utilization. The SDN agent considers the network-wide, host, and sNIC specific capabilities and constraints. Based on workload and traffic characteristics, P4NFV determines the partitioning of the P4 tables and optimal placement of NFs (P4 actions) to minimize the overall delay and maximize resource utilization. P4NFV uses Mixed Integer Linear Programming (MILP) based optimization formulation and achieves up to 2. 5X increase in system capacity while minimizing the delay experienced by flows. P4NFV considers the number of packet exchanges, flow size, and state dependency to minimize the delay imposed by data transmission over PCI Express interface.more » « less
-
Due to better cost benefits, P4 programmable switches have been considered in a few recent works to implement 5G User Plane Function (UPF). To circumvent limited resources on P4 programmable switches, they either ignore some essential UPF features or resort to a hybrid deployment approach which requires extra resources. This work is aimed to improve the performance of UPFs with comprehensive features which, except packet buffering, are deployable entirely on commodity P4 programmable switches. We build a baseline UPF based on prior work and analyze its key performance bottlenecks. We propose a three-tiered approach to optimize rule storage on the switch ASICs. We also develop a novel scheme that combines pendulum table access and selective usage pulling to reduce the operational latency of the UPF. Using a commodity P4 programmable switch, the experimental results show that our UPF implementation can support twice as many mobile devices as the baseline UPF and 1.9 times more than SD-Fabric. Our work also improves the throughputs in three common types of 5G call flows by 9-619% over the UPF solutions in two open-source 5G network emulators.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1145/3544216.3544267
