More Like this

1. Unimer suppression enables supersaturated homopolymer swollen micelles with long-term stability after glassy entrapment

   https://doi.org/10.1039/d3sm01754k  

   Williams, Eric R ; Ruff, Christian X ; Stefik, Morgan ( March 2024 , Soft Matter)

   Micelle sizes are critical for a range of applications where the simple ability to adjust and lock in specific stable sizes has remained largely elusive. While micelle swelling agents are well-known, their dynamic re-equilibration in solution implies limited stability. Here, a non-equilibrium processing sequence is studied where supersaturated homopolymer swelling is combined with glassy-core (‘‘persistent’’) micelles. This path-dependent process was found to sensitively depend on unimer concentration as revealed by DLS, SAXS, and TEM analysis. Here, lower-selectivity solvent combinations led to the formation of unimer-homopolymer aggregates and eventual precipitation, reminiscent of anomalous micellization. In contrast, higher-selectivity solvents enabled supersaturated homopolymer loadings favored by rapid homopolymer insertion. The demonstrated B40–130 nm core-size tuning exceeded prior equilibrium demonstrations and subsequent core-vitrification enabled size persistence beyond 6 months. Lastly, the linear change in micelle diameter with homopolymer addition was found to correlate with a plateau in the interfacial area per copolymer chain. 

   more » « less
2. Widely tunable persistent micelle templates via homopolymer swelling

   https://doi.org/10.1039/c9sm00484j  

   Sarkar, Amrita ; Thyagarajan, Akshay ; Cole, August ; Stefik, Morgan ( July 2019 , Soft Matter)

   The combination of precision control with wide tunability remains a challenge for the fabrication of porous nanomaterials suitable for studies of nanostructure–behavior relationships. Polymer micelle templates broadly enable porous materials, however micelle equilibration hampers independent pore and wall size control. Persistent micelle templates (PMT) have emerged as a kinetic controlled platform that uniquely decouples the control of pore and wall dimensions. Here, chain exchange is inhibited to preserve a constant template dimension (pore size) despite the shifting equilibrium while materials are added between micelles. Early PMT demonstrations were synthesis intensive with limited 1–1.3× pore size tuning for a given polymer. Here we demonstrate PMT swelling with homopolymer enables 1–3.2× (13.3–41.9 nm) pore size variation while maintaining a monomodal distribution with up to 250 wt% homopolymer, considerably higher than the ∼90 wt% limit found for equilibrating micelles. These swollen PMTs enabled nanomaterial series with constant pore size and precision varied wall-thickness. Kinetic size control here is unexpected since the homopolymer undergoes dynamic exchange between micelles. The solvent selection influenced the time window before homopolymer phase separation, highlighting the importance of considering homopolymer–solvent interactions. This is the first PMT demonstration with wide variation of both the pore and wall dimensions using a single block polymer. Lastly this approach was extended to a 72 kg mol −1 block polymer to enable a wide 50–290 nm range of tunable macropores. Here the use of just two different block polymers and one homopolymer enabled wide ranging pore sizes spanning from 13.3–290 nm (1–22×). 

   more » « less
3. Characterization of Micelle Formation by the Single Amino Acid-Based Surfactants Undecanoic L-Isoleucine and Undecanoic L-Norleucine in the Presence of Diamine Counterions with Varying Chain Lengths

   https://doi.org/10.3390/colloids7020028  

   Maynard-Benson, Amber ; Alekisch, Mariya ; Wall, Alyssa ; Billiot, Eugene J. ; Billiot, Fereshteh H. ; Morris, Kevin F. ( June 2023 , Colloids and Interfaces)

   The binding of linear diamine counterions with different methylene chain lengths to the amino-acid-based surfactants undecanoic L-isoleucine (und-IL) and undecanoic L-norleucine (und-NL) was investigated with NMR spectroscopy. The counterions studied were 1,2-ethylenediamine, 1,3-diaminopropane, 1,4-diaminobutane, 1,5-diaminopentane, and 1,6-diaminohexane. These counterions were all linear diamines with varying spacer chain lengths between the two amine functional groups. The sodium counterion was studied as well. Results showed that when the length of the counterion methylene chain was increased, the surfactants’ critical micelle concentrations (CMC) decreased. This decrease was attributed to diamines with longer methylene chains binding to multiple surfactant monomers below the CMC and thus acting as templating agents for the formation of micelles. The entropic hydrophobic effect and differences in diamine counterion charge also contributed to the size of the micelles and the surfactants’ CMCs in the solution. NMR diffusion measurements showed that the micelles formed by both surfactants were largest when 1,4-diaminobutane counterions were present in the solution. This amine also had the largest mole fraction of micelle-bound counterions. Finally, the und-NL micelles were larger than the und-IL micelles when 1,4-diaminobutane counterions were bound to the micelle surface. A model was proposed in which this surfactant formed non-spherical aggregates with both the surfactant molecules’ hydrocarbon chains and n-butyl amino acid side chains pointing toward the micelle core. The und-IL micelles, in contrast, were smaller and likely spherically shaped. 

   more » « less
4. Effect of Changing Interfacial Tension on Fragmentation Kinetics of Block Copolymer Micelles

   https://doi.org/10.1021/acs.macromol.2c02158  

   Gupta, Supriya ; Lodge, Timothy P. ( February 2023 , Macromolecules)

   Micelle fragmentation, one of the key mechanisms responsible for equilibration of kinetically trapped micelles, is investigated for block copolymer micelles in ionic liquids. In particular, the role of driving force for micelle fragmentation is studied by altering the solvent quality after micelle preparation, amounting to a jump in interfacial tension γ between solvent and the micelle core. Direct dissolution of a 1,2-polybutadiene-b-poly(ethylene oxide) copolymer (Mn = 17.5 kDa and fPEO = 0.38) in the ionic liquid [C2mim][TFSI] results in large micelles with average size 〖"〈" "R" _"h" "〉" 〗_"∘" " ≈ 68" nm and dispersity "Đ ≈ 1.27" . The solution of the as-prepared micelles is then diluted by the careful addition of a second ionic liquid [C10mim][TFSI] having lower γ with the micelle core, such that the micelles remain unaffected. The γ and hence the quality of the solvent mixture was controlled by the degree of dilution. The choice of the second solvent is based on the measurement of γ for a series of [Cxmim][TFSI] ILs with 1-2-polybutadiene homopolymer, carried out using a pendant drop test. Diluting the micelles by adding another ionic liquid with lower γ tends to decrease the equilibrium micelle size which, in turn, enhances the driving force for fragmentation of the bigger as-prepared micelles, represented by increase in the ratio of aggregation numbers Q/Qeq. Subjecting the diluted micellar solution to temperature-jump to 170 °C followed by thermal annealing leads to fragmentation of the as-prepared micelles to attain a near-equilibrium state. The micelles are characterized using in-situ dynamic light scattering technique to observe the time evolution of average micelle size, from which the relaxation time is obtained. Additionally, small-angle X-ray scattering and cryogenic transmission electron microscopy measurements were carried out to obtain the micelle core size and distribution in the micellar solutions before and after fragmentation. The enhancement in the driving force achieved by controlling the amount of low γ solvent resulted in faster fragmentation; the characteristic fragmentation time decreases monotonically on increasing the size ratio Q/Qeq from 1.2 to 5. 

   more » « less
5. Selective hydrogen bonding controls temperature response of layer-by-layer upper critical solution temperature micellar assemblies

   https://doi.org/10.1039/d0sm01997f  

   Aliakseyeu, Aliaksei ; Albright, Victoria ; Yarbrough, Danielle ; Hernandez, Samantha ; Zhou, Qing ; Ankner, John F. ; Sukhishvili, Svetlana A. ( March 2021 , Soft Matter)

   null (Ed.)

   This work establishes a correlation between the selectivity of hydrogen-bonding interactions and the functionality of micelle-containing layer-by-layer (LbL) assemblies. Specifically, we explore LbL films formed by assembly of poly(methacrylic acid) (PMAA) and upper critical solution temperature block copolymer micelles (UCSTMs) composed of poly(acrylamide- co -acrylonitrile) P(AAm- co -AN) cores and polyvinylpyrrolidone (PVP) coronae. UCSTMs had a hydrated diameter of ∼380 nm with a transition temperature between 45 and 50 °C, regardless of solution pH. Importantly, micelles were able to hydrogen-bond with PMAA, with the critical interaction pH being temperature dependent. To better understand the thermodynamic nature of these interactions, in depth studies using isothermal titration calorimetry (ITC) were conducted. ITC reveals opposite signs of enthalpies for binding of PMAA with micellar coronae vs. with the cores. Moreover, ITC indicates that pH directs the interactions of PMAA with micelles, selectively enabling binding with the micellar corona at pH 4 or with both the corona and the core at pH 3. We then explore UCSTM/PMAA LbL assemblies and show that the two distinct modes of PMAA interaction with the micelles ( i.e. whether or not PMAA binds with the core) had significant effects on the film composition, structure, and functionality. Consistent with PMAA hydrogen bonding with the P(AAm- co -AN) micellar cores, a significantly higher fraction of PMAA was found within the films assembled at pH 3 compared to pH 4 by both spectroscopic ellipsometry and neutron reflectometry. Selective interaction of PMAA with PVP coronae of the assembled micelles, achieved by the emergence of partial ionization of PMAA at pH 4 was critical for preserving film functionality demonstrated as temperature-controlled swelling and release of a model small molecule, pyrene. The work done here can be applied to a multitude of assembled polymer systems in order to predict suppression/retention of their stimuli-responsive behavior. 

   more » « less