skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Electrochemical Separation of Ag2S and Cu2S from Molten Sulfide Electrolyte
The production of precious metals from Cu-rich sources such as ore products or secondary sources is slow and complex largely due to limited solubility in aqueous electrolytes. This results in sequential processing with various electrolytes and chemistries, where first Cu is electrorefined, followed by Ag, followed by Au and the platinum group metals. These are separate processes, often conducted in separate electrorefining and electrowinning facilities. The chemical properties of molten sulfides, and their ability to operate at a temperature where liquid metal cathodes are used, suggest the possibility of an alternative, streamlined processing route for Cu and precious metals. Unfortunately, little thermodynamic or electrochemical information is available regarding the behavior of Cu and precious metal sulfides in molten sulfide electrolytes. Herein, the relative activity of the Cu2S-Ag2S pseudobinary dissolved in a BaS-La2S3 supporting electrolyte is measured at 1523 K. It was found that the supporting electrolyte favors mixing with Ag2S over Cu2S. Molten sulfide electrolysis of Cu and Ag was conducted, with results in good agreement with the thermodynamic model. It is found that the Ag-Cu cathode chemistry will influence the electrochemical selectivity in the Ag-Cu-Ba-La-S system.  more » « less
Award ID(s):
1760025
PAR ID:
10389900
Author(s) / Creator(s):
;
Date Published:
Journal Name:
Journal of the Electrochemical Society
Volume:
169
Issue:
6
ISSN:
0013-4651
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, SusMat)
    Abstract Oxygen reduction reaction (ORR) is an electrochemical reaction in which dissolved oxygen in an electrolyte is reduced to OH−/H2O when receiving electrons. This reaction plays a crucial role in shaping the efficiency of both metal–air batteries and fuel cells, and precious metals are the dominant catalysts carrying out the ORR in their cathodes. However, how to manipulate the electronic structure of precious metals as active sites to further promote ORR performance and maximize the utilization rate is still under development. Metal oxide serves as suitable and promising support that can strongly interact with precious metals for both activity and durability enhancement. Herein, we present recent research updates on strong precious metal–metal oxide interaction (SPMMOI) utilized in ORR. We start by introducing the background of ORR, the issues to be solved, and its practical applications followed by a thorough discussion of the reaction mechanism and comprehensive evaluation protocols of performance. We then provide a complete understanding of the working principle of SPMMOI and highlight the related advances. Finally, we summarize the merits of the precious metal–metal oxide system and propose the research direction as well as some urgent problems to be addressed in the future. 
    more » « less
  2. ; ; ; (, Dalton Transactions)
    null (Ed.)
    Although unsaturated organotrifluoroborates are common synthons in metal–organic chemistry, their transition metal complexes have received little attention. [CH 2 (3,5-(CH 3 ) 2 Pz) 2 ]Cu(CH 2 CHBF 3 ), (SIPr)Cu(MeCN)(CH 2 CHBF 3 ) and [CH 2 (3,5-(CH 3 ) 2 Pz) 2 ]Ag(CH 2 CHBF 3 ) represent rare, isolable molecules featuring a vinyltrifluoroborate ligand on coinage metals. The X-ray crystal structures show the presence of three-coordinate metal sites in these complexes. The vinyltrifluoroborate group binds asymmetrically to the metal site in [CH 2 (3,5-(CH 3 ) 2 Pz) 2 ]M(CH 2 CHBF 3 ) (M = Cu, Ag) with relatively closer M–C(H) 2 distances. The computed structures of [CH 2 (3,5-(CH 3 ) 2 Pz) 2 ]M(CH 2 CHBF 3 ) and M(CH 2 CHBF 3 ), however, have shorter M–C(H)BF 3 distances than M–C(H) 2 . These molecules feature various inter- or intra-molecular contacts involving fluorine of the BF 3 group, possibly affecting these M–C distances. The binding energies of [CH 2 CHBF 3 ] − to Cu + , Ag + and Au + have been calculated at the wB97XD/def2-TZVP level of theory, in the presence and absence of the supporting ligand CH 2 (3,5-(CH 3 ) 2 Pz) 2 . The calculation shows that Au + has the strongest binding to the [CH 2 CHBF 3 ] − ligand, followed by Cu + and Ag + , irrespective of the presence of the supporting ligand. However, in all three metals, the supporting ligand weakens the binding of olefin to the metal. The same trends were also found from the analysis of the σ-donation and π-backbonding interactions between the metal fragment and the π and π* orbitals of [CH 2 CHBF 3 ] − . 
    more » « less
  3. ; ; ; ; (, ChemRxiv)
    The layered transition metal chalcogenides MCrX2 (M = Ag, Cu; X = S, Se, Te) are of interest for energy storage because chemically Li-substituted analogs were reported as superionic Li+ conductors. The coexistence of fast ion transport and reducible transition metal and chalcogen elements suggests that this family may offer multifunctional capability for electrochemical storage. Here, we investigate the electrochemical reduction of AgCrSe2 and CuCrSe2 in non-aqueous Li- and Na-ion electrolytes using electrochemical measurements coupled with ex situ characterization (scanning electron microscopy, energy-dispersive spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy). Both compounds delivered high initial specific capacities (~ 560 mAh/g), corresponding to 6.64 and 5.73 Li+/e- per formula unit for AgCrSe2 and CuCrSe2, respectively. We attribute this difference to distinct reduction pathways: 1) Li+ intercalation to form LiCrSe2 and extruded Ag or Cu, 2) conversion of LiCrSe2 to Li2Se, and 3) formation of an Ag-Li alloy at the lowest potential, operative only in AgCrSe2. Consistent with this proposed mechanism, step 3 was absent during reduction of AgCrSe2 in a Na-ion electrolyte since Ag does not alloy with Na. These results demonstrate the complex reduction chemistry of MCrX2 in the presence of alkali ions, providing insights into the use of MCrX2 materials as alkali ion superionic conductors or high capacity electrodes for lithium or sodium-ion type batteries. 
    more » « less
  4. ; (, Journal of The Electrochemical Society)
    We developed a method, by combining electrochemical and electrokinetic streaming current techniques to study ion distribution and ionic conductivity in the diffuse part of electrochemical double layer (EDL) of a metal-electrolyte interface, when potential is applied on the metal by a potentiostat. We applied this method to an electrochemically clean polycrystalline gold (poly Au)-electrolyte interface and measured zeta potential for various applied potentials, pH, and concentration of the electrolyte. Specific adsorption of chloride ions on poly Au was studied by comparing measurements of zeta potential in KCl and KClO4electrolytes. In absence of specific adsorption, zeta potential was found to increase linearly with applied potential, having slope of 0.04–0.06. When Cl−adsorption occurs, zeta potential changes the sign from positive to negative value at ∼750 mV vs Ag/AgCl applied potential. Complementary cyclic voltammetry and X-ray photoelectron spectroscopy studies were conducted to determine a degree of chloride ion adsorption on a poly Au. A correlation was observed between the applied potential at which zeta potential is zero and potential of zero charge for poly Au. Ion-distribution and ionic conductivity in the diffuse layer were calculated from the measured zeta potential data using nonlinear Poisson-Boltzmann distribution. 
    more » « less
  5. ; ; (, ChemElectroChem)
    Abstract Synthesis of intermetallic crystals by electrodeposition of Ag from alkaline aqueous electrolytes containing AgCN onto liquid metal electrodes via an electrochemical liquid‐liquid‐solid (ec‐LLS) process has been performed. X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy were performed to identify crystalline products. Ec‐LLS experiments performed with pure liquid Hg and Ga electrodes resulted in the formation of polycrystalline Ag2Ga and Ag2Hg3. Experiments performed with In‐containing liquid metals preferentially yielded Ag9In4and AgIn2products with liquid Hg0.35In0.65and Ga0.86In0.14, respectively. The product distribution with liquid Hg0.35In0.65depended on the level of Ag supersaturation during the electrodeposition. A mechanism that accounts for the aforementioned observations is presented and discussed. This work described the formation of Ag−In intermetallic phases by the isothermal electroreduction of Ag into different liquid metal solvents via ec‐LLS. Electrodeposition of Ag into a pure Ga or pure Hg liquid metal pool yielded precisely the compounds predicted from isothermal cross‐sections of the respective binary phase diagrams. These compounds were not found when using liquid Hg or Ga containing appreciable In. The smaller enthalpy of formation for AgIn2was consistent with its synthesis in Ga0.86In0.14. However, the observed product of Ag9In4in Hg‐containing liquid metals could not be rationalized solely from thermodynamic factors. Instead, this observation was consistent with a kinetic pathway based on the lability of Hg‐metal bonds and nearly identical crystal structures of Ag9In4and Ag2Hg3. Site exchange of Hg for In is consistent with our prior observations[23]of In exchange into Hg−Pd structures during Pd electrodeposition. This mechanism is not based on any direct role of electrochemistry other than aspects that dictate the operative supersaturation of the metal solute. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email