An official website of the United States government
The mechanisms of abdominal aortic aneurysm (AAA) formation and rupture are controversial in the literature. While the intraluminal thrombus (ILT) plays a crucial role in reducing oxygen flux to the tissue and therefore decreasing the aortic wall strength, other physiological parameters such as the vasa vasorum (VV) oxygen flow and its consumption contribute to altered oxygenation responses of the arterial tissue as well. The goal of this research is to analyse the importance of the aforementioned parameters on oxygen delivery to the aneurysmal wall in a patient-specific AAA. Numerical simulations of coupled blood flow and mass transport with varying levels of VV concentration and oxygen reaction rate coefficient are performed. The hypoperfusion of the adventitial VV and high oxygen consumption are observed to have critical effects on reducing aneurysmal tissue oxygen supply and can therefore exacerbate localized oxygen deprivation.
more »
« less
Analyzing the Effects of Multi-Layered Porous Intraluminal Thrombus on Oxygen Flow in Abdominal Aortic Aneurysms
Determination of abdominal aortic aneurysm (AAA) rupture risk involves the accurate prediction of mechanical stresses acting on the arterial tissue, as well as the wall strength which has a correlation with oxygen supply within the aneurysmal wall. Our laboratory has previously reported the significance of an intraluminal thrombus (ILT) presence and morphology on localized oxygen deprivation by assuming a uniform consistency of ILT. The aim of this work is to investigate the effects of ILT structural composition on oxygen flow by adopting a multilayered porous framework and comparing a two-layer ILT model with one-layer models. Three-dimensional idealized and patient-specific AAA geometries are generated. Numerical simulations of coupled fluid flow and oxygen transport between blood, arterial wall, and ILT are performed, and spatial variations of oxygen concentrations within the AAA are obtained. A parametric study is conducted, and ILT permeability and oxygen diffusivity parameters are individually varied within a physiological range. A gradient of permeability is also defined to represent the heterogenous structure of ILT. Results for oxygen measures as well as filtration velocities are obtained, and it is found that the presence of any ILT reduces and redistributes the concentrations in the aortic wall markedly. Moreover, it is found that the integration of a porous ILT significantly affects the oxygen transport in AAA and the concentrations are linked to ILT’s permeability values. Regardless of the ILT stratification, maximum variation in wall oxygen concentrations is higher in models with lower permeability, while the concentrations are not sensitive to the value of the diffusion coefficient. Based on the observations, we infer that average one-layer parameters for ILT material characteristics can be used to reasonably estimate the wall oxygen concentrations in aneurysm models.
more »
« less
- PAR ID:
- 10390116
- Date Published:
- Journal Name:
- Oxygen
- Volume:
- 2
- Issue:
- 4
- ISSN:
- 2673-9801
- Page Range / eLocation ID:
- 518 to 536
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This study discusses turbulent suspension flows of non-Brownian, non-colloidal, neutrally buoyant and rigid spherical particles in a Newtonian fluid over porous media with particles too large to penetrate and move through the porous layer. We consider suspension flows with the solid volume fraction $${{\varPhi _b}}$$ ranging from 0 to 0.2, and different wall permeabilities, while porosity is constant at 0.6. Direct numerical simulations with an immersed boundary method are employed to resolve the particles and flow phase, with the volume-averaged Navier–Stokes equations modelling the flow within the porous layer. The results show that in the presence of particles in the free-flow region, the mean velocity and the concentration profiles are altered with increasing porous layer permeability because of the variations in the slip velocity and wall-normal fluctuations at the suspension-porous interface. Furthermore, we show that variations in the stress condition at the interface significantly affect the particle near-wall dynamics and migration toward the channel core, thereby inducing large modulations of the overall flow drag. At the highest volume fraction investigated here, $${{\varPhi _b}}= 0.2$$ , the velocity fluctuations and the Reynolds shear stress are found to decrease, and the overall drag increases due to the increase in the particle-induced stresses.more » « less
-
BackgroundThe prediction of rupture in intracranial aneurysms is challenging. Aneurysm growth has been identified as a strong risk factor for rupture and aneurysm wall motion is a potential biomarker for growth, but visualizing aneurysm wall motion using conventional imaging techniques is difficult. Computational fluid dynamic simulations have been used to identify hemodynamic risk factors of intracranial aneurysm instability, but often lack observable and quantifiable biomechanical correlates that can be directly measured in vivo. MethodsIn this retrospective case–control study of matched patients, cohorts with growing (n=6) and stable (n=6) unruptured intracranial aneurysms were selected from our institutional database of 4D Flow MRI scans. The amplified Flow algorithm was used to extract maps of wall motion for each aneurysm. Hemodynamics within the aneurysm dome were calculated using established computational fluid dynamic methods, and hemodynamic variables were evaluated against wall motion for stable and growing aneurysms. ResultsSeveral hemodynamic variables were found to be both significant predictors of aneurysm growth and highly correlated with aneurysm wall motion. The hemodynamic variable most correlated with both the maximum value of aneurysm wall motion and spatial variance of aneurysm wall motion, the time coefficient of variance of the directional wall shear stress gradient (representing changing directions of wall shear stress), was also the best hemodynamic predictor of aneurysm growth. ConclusionsSpatial variance of wall motion and hemodynamic variables are increased in growing aneurysms, and the fluctuations in the directional wall shear stress correlate directly with wall motion, indicating that heterogeneous wall motion and hemodynamics are interrelated and play a critical role in aneurysm instability.more » « less
-
This work is aimed to establish engineering theories of the coupled longitudinal and radial motion of the arterial wall. By treating the arterial wall as a piano string in the longitudinal direction and as a viscoelastic material in the circumferential direction, and considering pulsatile pressure and wall shear stress from axial blood flow in an artery, the fully-formed governing equations of the coupled motion of the arterial wall are obtained and are related to the engineering theories of axial blood flow for a unified engineering understanding of blood circulation in the cardiovascular (CV) system. The longitudinal wall motion and the radial wall motion are essentially a longitudinal elastic wave and a transverse elastic wave, respectively, traveling along the arterial tree, with their own propagation velocities dictated by the physical properties and geometrical parameters of the arterial wall. The longitudinal initial tension is essential for generating a transverse elastic wave in the arterial wall to accompany the pulsatile pressure wave in axial blood flow. Under aging and subclinical atherosclerosis, propagation of the two elastic waves and coupling of the two elastic waves weakens and consequently might undermine blood circulation.more » « less
-
null (Ed.)Abstract Numerical simulations for computational hemodynamics in clinical settings require a combination of many ingredients, mathematical models, solvers and patient-specific data. The sensitivity of the solutions to these factors may be critical, particularly when we have a partial or noisy knowledge of data. Uncertainty quantification is crucial to assess the reliability of the results. We present here an extensive sensitivity analysis in aortic flow simulations, to quantify the dependence of clinically relevant quantities to the patient-specific geometry and the inflow boundary conditions. Geometry and inflow conditions are generally believed to have a major impact on numerical simulations. We resort to a global sensitivity analysis, (i.e., not restricted to a linearization around a working point), based on polynomial chaos expansion (PCE) and the associated Sobol' indices. We regard the geometry and the inflow conditions as the realization of a parametric stochastic process. To construct a physically consistent stochastic process for the geometry, we use a set of longitudinal-in-time images of a patient with an abdominal aortic aneurysm (AAA) to parametrize geometrical variations. Aortic flow is highly disturbed during systole. This leads to high computational costs, even amplified in a sensitivity analysis -when many simulations are needed. To mitigate this, we consider here a large Eddy simulation (LES) model. Our model depends in particular on a user-defined parameter called filter radius. We borrowed the tools of the global sensitivity analysis to assess the sensitivity of the solution to this parameter too. The targeted quantities of interest (QoI) include: the total kinetic energy (TKE), the time-average wall shear stress (TAWSS), and the oscillatory shear index (OSI). The results show that these indexes are mostly sensitive to the geometry. Also, we find that the sensitivity may be different during different instants of the heartbeat and in different regions of the domain of interest. This analysis helps to assess the reliability of in silico tools for clinical applications.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3390/oxygen2040034
