An official website of the United States government
Recent research has demonstrated the potential for topological superconductivity, anisotropic Majorana bound states, optical nonlinearity, and enhanced electrochemical activity for transition metal dichalcogenides (TMDs) with a 2M structure. These unique TMD compounds exhibit metastability and, upon heating, undergo a transition to the thermodynamically stable 2H phase. The 2M phase is commonly made at high temperatures using traditional solid-state methods, and this metastability further complicates the growth of large 2M WS2 crystals. Herein, a novel synthetic method was developed, focusing on a molten salt reaction to synthesize large 2H crystals and then inducing transformation to the 2M phase through intercalation and thermal treatment. The 2H crystals were intercalated via a room-temperature sodium naphthalenide solution, producing a previously unreported Na-intercalated 2H WS2 phase. Thermal heating was required to facilitate the phase transition to the intercalated 2M crystal structure. This phase transition was studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), electron dispersive X-ray spectroscopy (EDS), and Raman spectroscopy, which confirmed the synthesis of the intercalated 2M phase. Upon deintercalation, crystal and powder samples showed superconductivity with a Tc of 8.6–8.7 K, similar to previously reported values. The generality of this process was further demonstrated using alkali metal triethyl borohydride to intercalate 2H WS2 and produced the desired 2M phase. This novel synthetic method has broad implications for discovering metastable phases in other TMD families and layered materials. Separation of the intercalation and phase transition also has the potential to allow for large-scale synthesis of this technologically important phase with greater control over each step of the reaction.
more »
« less
Poly (3‐hexylthiophene) (P3HT) Crystalsomes: Tiling 1D Polymer Crystals on a Spherical Surface
Abstract Polymer crystalsomes are a class of hollow crystalline polymer nanoparticles with shells formed by single crystals with broken translational symmetry. They have shown intriguing mechanical, thermal, and biomedical properties associated with spherical packing. Previously reported crystalsomes are formed by quasi‐2D lamellae which can readily tile on a spherical surface. In this work, the formation of polymer crystalsomes formed by 1D polymer crystals is reported. Poly (3‐hexylthiophene) (P3HT) is chosen as the model polymer because of its 1D growth habit. P3HT crystalsomes are successfully fabricated using a miniemulsion solution crystallization method, as confirmed by scanning electron microscopy and transmission electron microscopy. X‐ray diffraction (XRD) and selected area electron diffraction experiments confirm that P3HT crystallized into a Form I crystal structure. XRD, differential scanning calorimetry and UV–Vis results reveal curvature‐dependent structural, thermal and electro‐optical properties.
more »
« less
- PAR ID:
- 10390319
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Macromolecular Rapid Communications
- Volume:
- 44
- Issue:
- 1
- ISSN:
- 1022-1336
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Titanium nitride (TiN) materials have gained an interest over the past years due to their unique characteristics, such as thermal stability, extreme hardness, low production cost, and comparable optical properties to gold. In the present study, TiN nanoparticles were synthesized via a thermal benzene route to obtain black nanoparticles. Scanning electron microscopy (SEM) was carried out to examine the morphology. Further microscopic characterization was done where the final product was drop cast onto double-sided conductive carbon tape and sputter-coated with gold/palladium at a thickness of 4 nm for characterization by field emission scanning electron microscopy (FE-SEM) with energy dispersive X-Ray spectroscopy (EDS) that revealed they are spherical. ImageJ software was used to measure the average size of the particles to be 79 nm in diameter. EDS was used to determine the elements present in the sample and concluded that there were no impurities. Further characterization by Fourier Transform infrared (FTIR) spectroscopy was carried out to identify the characteristic peaks of TiN. X-ray diffraction (XRD) revealed typical peaks of cubic phase titanium nitride, and crystallite size was determined to be 14 nm using the Debye-Scherrer method. Dynamic light scattering (DLS) analysis revealed the size distribution of the TiN nanoparticles, with nanoparticles averaging at 154 nm in diameter. Zeta potential concluded the surface of the TiN nanoparticles is negatively charged.more » « less
-
Abstract Materials in single crystal form are often sought after because the absence of grain boundaries can result in unique properties relative to the polycrystal, but producing these materials is typically a slow and complex process. In this work, pseudo single crystals of the pseudobrookite compound CoTi2O5were synthesized by solid‐state reaction from a duplex grain mixture of CoTiO3and TiO2. The size of the crystallites was >250 µm. The transformation and subsequent microstructural evolution of the CoTi2O5was studied by scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), and X‐ray diffraction (XRD). A novel growth mechanism was identified whereby a single crystal CoTi2O5front advances simultaneously along multiple CoTiO3/TiO2diphasic boundaries. The single crystal domains were composed of subgrains approximately 5 µm in diameter; differences in the subgrain size and misorientation were related to the growth mechanism and the initial grain size of the duplex CoTiO3–TiO2mixture. CoTi2O5is a little characterized compound, and this study represents the most significant microstructural study of CoTi2O5to date. The findings may be applied to similar pseudobrookite compounds such as MgTi2O5and Al2TiO5.more » « less
-
Bimagnetic nanoparticles show promise for applications in energy efficient magnetic storage media and magnetic device applications. The magnetic properties, including the exchange bias of nanostructured materials can be tuned by variation of the size, composition, and morphology of the core vs overlayer of the nanoparticles (NPs). The purpose of this study is to investigate the optimal synthesis routes, structure and magnetic properties of novel CoO/NiFe 2 O 4 heterostructured nanocrystals (HNCs). In this work, we aim to examine how the size impacts the exchange bias, coercivity and other magnetic properties of the CoO/NiFe 2 O 4 HNCs. The nanoparticles with sizes ranging from 10 nm to 24 nm were formed by synthesis of an antiferromagnetic (AFM) CoO core and deposition of a ferrimagnetic (FiM) NiFe 2 O 4 overlayer. A highly crystalline magnetic phase is more likely to occur when the morphology of the core-overgrowth is present, which enhances the coupling at the AFM-FiM interface. The CoO core NPs are prepared using thermal decomposition of Co(OH) 2 at 600 °C for 2 hours in a pure argon atmosphere, whereas the HNCs are obtained first using thermal evaporation followed by hydrothermal synthesis. The structural and morphological characterization made using X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), and scanning electron microscopy (SEM) techniques verifies that the HNCs are comprised of a CoO core and a NiFe 2 O 4 overgrowth phase. Rietveld refinement of the XRD data shows that the CoO core has the rocksalt (Fd3 m) crystal structure and the NiFe 2 O 4 overgrowth has the spinel (C12/m1) crystal structure. SEM-EDS data indicates the presence and uniform distribution of Co, Ni and Fe in the HNCs. The results from PPMS magnetization measurements of the CoO/NiFe 2 O 4 HNCs are discussed herein.more » « less
-
Abstract The range of possible morphologies for bent‐core B4 phase liquid crystals has recently expanded from helical nanofilaments (HNFs) and modulated HNFs to dual modulated HNFs, helical microfilaments, and heliconical‐layered nanocylinders. These new morphologies are observed when one or both aliphatic side chains contain a chiral center. Here, the following questions are addressed: which of these two chiral centers controls the handedness (helicity) and which morphology of the nanofilaments is formed by bent‐core liquid crystals with tris‐biphenyl diester core flanked by two chiral 2‐octyloxy side chains? The combined results reveal that the longer arm of these nonsymmetric bent‐core liquid crystals controls the handedness of the resulting dual modulated HNFs. These derivatives with opposite configuration of the two chiral side chains now feature twice as large dimensions compared to the homochiral derivatives with identical configuration. These results are supported by density functional theory calculations and stochastic dynamic atomistic simulations, which reveal that the relative difference between thepara‐ andmeta‐sides of the described series of compounds drives the variation in morphology. Finally, X‐ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM) data also uncover the new morphology for B4 phases featuringp2/msymmetry within the filaments and less pronounced crystalline character.more » « less
