An official website of the United States government
Abstract Microbial fuel cells (MFCs) that generate electricity generation from a broad diversity of biomass and organic substrates through microbial metabolism have attracted considerable research interest as an alternative clean energy technology and energy‐efficient wastewater treatment method. Despite encouraging successes and auspicious pilot‐scale experiments of the MFCs, increasing doubts about their viability for practical large‐scale applications are being raised. Low performance, expensive core parts and materials, energy‐intensive operation, and scaling bottlenecks question a sustainable development. Instead, special MFCs for low‐power battery‐reliant devices might be more applicable and potentially realizable. Such bacteria‐powered biobatteries would enable i) a truly stand‐alone device platform suitable for use in resource‐limited and remote regions, ii) simple, on‐demand power generation within a programmed period of time, and iii) a tracelessly biodegradable battery due to the use of the bacteria used for power generation. The biobattery would be an excellent power solution for small‐scale, on‐demand, single‐use, and disposable electronics. Recent progress of small‐scale MFC‐based biobatteries is critically reviewed with specific attention toward various device platforms. Furthermore, comments and outlook related to the potential directions and challenges of the biobatteries are discussed to offer inspiration to the community and induce fruitful future research.
more »
« less
The Future of Clean Computing May Be Dirty
The emergence of the Internet of Things and pervasive sensor networks have generated a surge of research in energy scavenging techniques. We know well that harvesting RF, solar, or kinetic energy enables the creation of battery-free devices that can be used where frequent battery changes or dedicated power lines are impractical. One unusual yet ubiquitous source of power is soil (earth itself) - or more accurately, bacterial communities in soil. Microbial fuel cells (MFCs) are electrochemical cells that harness the activities of microbes that naturally occur in soil, wetlands, and wastewater. MFCs have been a topic of research in environmental engineering and microbiology for decades, but are a relatively new topic in electronics design and research. Most low-power electronics have traditionally opted for batteries, RF energy, or solar cells. This is changing, however, as the limitations and costs of these energy sources hamper our ability to deploy useful systems that last for decades in challenging environments. If large-scale, long-term applications like underground infrastructure monitoring, smart farming, and sensing for conservation are to be possible, we must rethink the energy source.
more »
« less
- Award ID(s):
- 2038853
- PAR ID:
- 10390991
- Date Published:
- Journal Name:
- GetMobile: Mobile Computing and Communications
- Volume:
- 26
- Issue:
- 3
- ISSN:
- 2375-0529
- Page Range / eLocation ID:
- 9 to 15
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Human-caused climate degradation and the explosion of electronic waste have pushed the computing community to explore fundamental alternatives to the current battery-powered, over-provisioned ubiquitous computing devices that need constant replacement and recharging. Soil Microbial Fuel Cells (SMFCs) offer promise as a renewable energy source that is biocompatible and viable in difficult environments where traditional batteries and solar panels fall short. However, SMFC development is in its infancy, and challenges like robustness to environmental factors and low power output stymie efforts to implement real-world applications in terrestrial environments. This work details a 2-year iterative process that uncovers barriers to practical SMFC design for powering electronics, which we address through a mechanistic understanding of SMFC theory from the literature. We present nine months of deployment data gathered from four SMFC experiments exploring cell geometries, resulting in an improved SMFC that generates power across a wider soil moisture range. From these experiments, we extracted key lessons and a testing framework, assessed SMFC's field performance, contextualized improvements with emerging and existing computing systems, and demonstrated the improved SMFC powering a wireless sensor for soil moisture and touch sensing. We contribute our data, methodology, and designs to establish the foundation for a sustainable, soil-powered future.more » « less
-
Recent advancements in semiconductor technologies have stimulated the growth of ultra-low power wearable devices. However, these devices often pose critical constraints in usability and functionality because of the on-device battery as the primary power source [1]. For example, periodic charging of wearable devices hampers the continuous monitoring of users' fitness or health conditions [2], and batteries and charging equipment have been identified as one of the most rapidly growing electronic waste streams [3]. To counteract the above-mentioned complications associated with the management of on-device batteries, wireless power transmission technologies capable of charging wearable devices in a completely unobtrusive and seamless manner have become an emerging topic of research over the past decade [4]. Researchers have instrumented daily objects or the surrounding environment with equipment that can wirelessly transfer energy from a variety of sources, such as Radio Frequency (RF) signals, laser, and electromagnetic fields [5]. However, these solutions require large and costly infrastructure and/or need to transmit a significant amount of power to support reasonable power harvesting at the wearable devices, which conflict with the vision of ubiquitously available and scalable charging support.more » « less
-
Energy storage is increasingly important for a diversity of applications. Batteries can be used to store solar or wind energy providing power when the Sun is not shining or wind speed is insufficient to meet power demands. For large scale energy storage, solutions that are both economically and environmentally friendly are limited. Flow batteries are a type of battery technology which is not as well-known as the types of batteries used for consumer electronics, but they provide potential opportunities for large scale energy storage. These batteries have electrochemical recharging capabilities without emissions as is the case for other rechargeable battery technologies; however, with flow batteries, the power and energy are decoupled which is more similar to the operation of fuel cells. This decoupling provides the flexibility of independently designing the power output unit and energy storage unit, which can provide cost and time advantages and simplify future upgrades to the battery systems. One major challenge of the existing commercial flow battery technologies is their limited energy density due to the solubility limits of the electroactive species. Improvements to the energy density of flow batteries would reduce their installed footprint, transportation costs, and installation costs and may open up new applications. This review will discuss the background, current progress, and future directions of one unique class of flow batteries that attempt to improve on the energy density of flow batteries by switching to solid electroactive materials, rather than dissolved redox compounds, to provide the electrochemical energy storage.more » « less
-
Abstract Transient electronics, which can operate only for short‐lived applications and then be eco‐friendly disintegrated, create opportunities in environmental sensing, healthcare, and hardware security. Paper‐based electronics, or papertronics, recently have rapidly advanced the physically transient device platform because paper as a foundation offers an environmentally sustainable and cost‐effective option for those increasingly pervasive and fast‐updated single‐use applications. Paper‐based power supplies are indispensable to realize a fully papertronic paradigm and are a critical enabler of environmentally benign power solutions. Microbial fuel cells (MFCs) hold great potential as power sources for such green papertronic applications. This work reports the design, operation, and optimization of a high‐power papertronic MFC by biosynthesizing microbe‐mediated tin oxide nanoparticles (SnO2NPs) on dormant Bacillus subtilis endospores. They form an electrical conduit that improves electron harvesting during the spore germination and power generation. The MFC is packaged in a sub‐microporous alginate to minimize the potential risk of bacteria leakage. Upon the introduction of water, the paper‐based MFC generates a significantly enhanced power density of 140 µW cm−2, which is more than two orders of magnitude greater than their previously reported counterparts. Six MFCs connected in series generate more than sufficient power to run an on‐chip, light‐emitting diode.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1145/3568113.3568117
