An official website of the United States government
The relationships between brittle detachment faulting and ductile shear zones in metamorphic core complexes are often ambiguous. Although it is commonly assumed that these two structures are kinematically linked and genetically related, direct observations of this coupling are rare. Here, we conducted a detailed field investigation to probe the connection between a detachment fault and mylonitic shear zone in the Ruby Mountain–East Humboldt Range metamorphic core complex, northeast Nevada. Field observations, along with new and published geochronology, demonstrate that Oligocene top-to-the-west mylonitic shear zones are crosscut by ca. 17 Ma subvertical basalt dikes, and these dikes are in turn truncated by middle Miocene detachment faults. The detachment faults appear to focus in preexisting weak zones in shaley strata and Mesozoic thrust faults. We interpret that the Oligocene mylonitic shear zones were generated in response to domal upwelling during voluminous plutonism and partial melting, which significantly predated the middle Miocene onset of regional extension and detachment slip. Our model simplifies mechanical issues with low-angle detachment faulting because there was an initial dip to the weak zones exploited by the future detachment-fault zone. This mechanism may be important for many apparent low-angle normal faults in the eastern Great Basin. We suggest that the temporal decoupling of mylonitic shearing and detachment faulting may be significant and underappreciated for many of the metamorphic core complexes in the North American Cordillera. In this case, earlier Eocene–Oligocene buoyant doming may have preconditioned the crust to be reactivated by Miocene extension thus explaining the spatial relationship between structures.
more »
« less
The role of gravitational body forces in the development of metamorphic core complexes
Within extreme continental extension areas, ductile middle crust is exhumed at the surface as metamorphic core complexes. Sophisticated quantitative models of extreme extension predicted upward transport of ductile middlelower crust through time. Here we develop a general model for metamorphic core complexes formation and demonstrate that they result from the collapse of a mountain belt supported by a thickened crustal root. We show that gravitational body forces generated by topography and crustal root cause an upward flow pattern of the ductile lower-middle crust, facilitated by a detachment surface evolving into low-angle normal fault. This detachment surface acquires large amounts of finite strain, consistent with thick mylonite zones found in metamorphic core complexes. Isostatic rebound exposes the detachment in a domed upwarp, while the final Moho discontinuity across the extended region relaxes to a flat geometry. This work suggests that belts of metamorphic core complexes are a fossil signature of collapsed highlands.
more »
« less
- Award ID(s):
- 1814051
- PAR ID:
- 10392354
- Date Published:
- Journal Name:
- Nature communications
- Volume:
- 13
- Issue:
- 5646
- ISSN:
- 2041-1723
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Strongly deformed footwall rocks exposed in metamorphic core complexes (MCC) of the North American Cordillera were exhumed via ductile attenuation, mylonitic shearing, and detachment faulting. Whether these structures accommodated diapiric upwelling or regional extension via low‐angle normal faulting is debated. The Ruby Mountains‐East Humboldt Range MCC, northeast Nevada, records top‐west normal‐sense exhumation of deformed Proterozoic‐Paleozoic stratigraphy and older basement. We conducted 1:24,000‐scale mapping of the southwestern East Humboldt Range, with integrated structural, geochemical, and geochronological analyses to characterize the geometry and kinematics of extension and exhumation of the mylonitized footwall. Bedrock stratigraphy is pervasively intruded by Cretaceous, Eocene, and Oligocene intrusions, but observations of a coherent stratigraphic section show >80% vertical attenuation of Neoproterozoic to Ordovician rocks. These rocks are penetratively sheared with top‐west kinematics. The shear zone thus experienced combined pure‐ and simple‐shear (i.e., general shear) strain. We argue that this shear zone was syn‐/post‐kinematic with respect to Oligocene plutonism because: (a) mylonitic shearing spatially corresponds with preceding Oligocene intrusions; (b) thermochronology reveals that the shear zone experienced substantial cooling and exhumation after Oligocene plutonism; and (c) the mylonites are crosscut by undated, but likely late Oligocene, leucogranite. We propose that Eocene mantle‐derived magmatism and thermal incubation led to Oligocene diapiric upwelling of the middle crust, with ductile stretching focused on the flanks of this upwarp. Regional Basin and Range extension initiated later in the middle Miocene. Therefore, the development of the East Humboldt Range shear zone was not driven by regional extension and coupled detachment faulting.more » « less
-
Abstract Processes controlling the formation of continental whole-lithosphere shear zones are debated, but their existence requires that the lithosphere is mechanically coupled from base to top. We document the formation of a dextral, whole-lithosphere shear zone in the Death Valley region (DVR), southwest United States. Dextral deflections of depth gradients in the lithosphere-asthenosphere boundary and Moho are stacked vertically, defining a 20–50-km-wide, lower lithospheric shear zone with ~60 km of shear. These deflections underlie an upper-crustal fault zone that accrued ~60 km of dextral slip since ca. 8–7 Ma, when we infer that whole-lithosphere shear began. This dextral offset is less than net dextral offset on the upper-crustal fault zone (~90 km, ca. 13–0 Ma) and total upper-crustal extension (~250 km, ca. 16–0 Ma). We show that, before ca. 8–7 Ma, weak middle crust decoupled upper-crustal deformation from deformation in the lower crust and mantle lithosphere. Between 16 and 7 Ma, detachment slip thinned, uplifted, cooled, and thus strengthened the middle crust, which is exposed in metamorphic core complexes collocated with the whole-lithosphere shear zone. Midcrustal strengthening coupled the layered lithosphere vertically and therefore enabled whole-lithosphere dextral shear. Where thick crust exists (as in pre–16 Ma DVR), midcrustal strengthening is probably a necessary condition for whole-lithosphere shear.more » « less
-
Abstract High-pressure metamorphic rocks occur as distinct belts along subduction zones and collisional orogens or as isolated blocks within orogens or mélanges and represent continental materials that were subducted to deep depths and subsequently exhumed to the shallow crust. Understanding the burial and exhumation processes and the sizes and shapes of the high-pressure blocks is important for providing insight into global geodynamics and plate tectonic processes. The South Beishan orogen of northwestern China is notable for the exposure of early Paleozoic high-pressure (HP), eclogite-facies metamorphic rocks, yet the tectonism associated with the HP metamorphism and mechanism of exhumation are poorly understood despite being key to understanding the tectonic evolution of the larger Central Asian Orogenic System. To address this issue, we examined the geometries, kinematics, and overprinting relationships of structures and determined the temperatures and timings of deformation and metamorphism of the HP rocks of the South Beishan orogen. Geochronological results show that the South Beishan orogen contains ca. 1.55–1.35 Ga basement metamorphic rocks and ca. 970–866 Ma granitoids generated during a regional tectono-magmatic event. Ca. 500–450 Ma crustal thickening and HP metamorphism may have been related to regional contraction in the South Beishan orogen. Ca. 900–800 Ma protoliths experienced eclogite-facies metamorphism (~1.2–2.1 GPa and ~700–800 °C) in thickened lower crust. These HP rocks were subsequently exhumed after ca. 450 Ma to mid-crustal depths in the footwall of a regional detachment fault during southeast-northwest–oriented crustal extension, possibly as the result of rollback of a subducted oceanic slab. Prior to ca. 438 Ma, north-south–oriented contraction resulted in isoclinal folding of the detachment fault and HP rocks. Following this contractional phase in the middle Mesozoic, the South Beishan orogen experienced thrusting interpreted to be the response to the closure of the Tethyan and Paleo-Asian Ocean domains. This contractional phase was followed by late Mesozoic extension and subsequent surface erosion that controlled exhumation of the HP rocks.more » « less
-
The geometry and magnitude of finite strain in the ductile footwalls of metamorphic core complexes are important parameters for testing the predictions of models of extension, yet are often difficult to quantify due to the rare preservation of deformed markers. The footwall of the Northern Snake Range core complex in eastern Nevada preserves a coherent stratigraphy of ductilely thinned Neoproterozoic-Cambrian metasedimentary rocks that are exposed over a 30 km transport-parallel distance, and thus provides an important opportunity to quantify footwall strain. We measured strain ellipsoids from stretched detrital quartz grains and ribbons in 45 samples that span the full exposed distance of the ductilely sheared footwall of the master detachment fault (the Northern Snake Range décollement), and we combined our data with 11 published strain ellipsoids. On the eastern side of the range, where recrystallization limits the preservation of detrital quartz grains, we estimated finite strain by comparing the attenuated thicknesses of Neoproterozoic-Cambrian rock units to their regional stratigraphic thicknesses. Our data demonstrate a dramatic gradient in ductile strain in the transport direction, from 39% subhorizontal extension and 32% subvertical thinning at the western flank of the Northern Snake Range to 450-1440% extension and 81-94% thinning at the eastern flank. The footwall underwent 18-20 km of cumulative ductile extension, which is equivalent to 38-43% of the 47 km of total extension accommodated on brittle structures. Kinematic vorticity estimates from published quartz petrofabrics define an eastward-increasing component of top-to-the-ESE simple shear. Our data are compatible with a rolling hinge model of extension, where displacement on a low-angle, upper-crustal, brittle detachment fault system was fed downward to a zone of distributed, simple shear-dominant, top-down-to-ESE ductile shearing beneath the quartz crystal-plastic transition. The progressive eastward translation and brittle thinning of the hanging wall resulted in the eastward migration of exhumation of footwall rocks. Migrating exhumation may in part be responsible for the eastward-increasing finite strain gradient, as footwall rocks in the eastern part of the range experienced a longer strain history.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- The DOI is not currently available.
