An official website of the United States government
In this paper, we present a set of geometric princi- ples for understanding and optimizing the gaits of drag-dominated kinematic locomoting systems. For systems with two shape vari- ables, the dynamics of gait optimization are analogous to the pro- cess by which internal pressure and surface tension combine to produce the shape and size of a soap bubble. The internal pres- sure on the gait curve is provided by the flux of the curvature of the system constraints passing through the surface bounded by the gait, and surface tension is provided by the cost associated with ex- ecuting the gait, which when executed at optimal (constant-power) pacing is proportional to its pathlength measured under a Rie- mannian metric. We extend these principles to work on systems with three and then more than three shape variables. We demon- strate these principles on a variety of system geometries (including Purcell’s swimmer) and for optimization criteria that include max- imizing displacement and efficiency of motion for both translation and turning motions. We also demonstrate how these principles can be used to simultaneously optimize a system’s gait kinematics and physical design.
more »
« less
Characterizing Error in Noncommutative Geometric Gait Analysis
A key problem in robotic locomotion is in finding optimal shape changes to effectively displace systems through the world. Variational techniques for gait optimization require estimates of body displacement per gait cycle; however, these estimates introduce error due to unincluded high order terms. In this paper, we formulate existing estimates for displacement, and describe the contribution of low order terms to these estimates. We additionally describe the magnitude of higher (third) order effects, and identify that choice of body coordinate, gait diameter, and starting phase influence these effects. We demonstrate that variation of such parameters on two example systems (the differential drive car and Purcell swimmer) effectively manages third order contributions.
more »
« less
- Award ID(s):
- 1653220
- PAR ID:
- 10394240
- Date Published:
- Journal Name:
- 2022 International Conference on Robotics and Automation (ICRA)
- Page Range / eLocation ID:
- 9845 to 9851
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)Snake robots have the potential to locomotethrough tightly packed spaces, but turning effectively withinunmodelled and unsensed environments remains challenging.Inspired by a behavior observed in the tiny nematode wormC.elegans, we propose a novel in-place turning gait for elongatedlimbless robots. To simplify the control of the robots’ many in-ternal degrees-of-freedom, we introduce a biologically-inspiredtemplate in which two co-planar traveling waves are superposedto produce an in-plane turning motion, theomega turn. Theomega turn gait arises from modulating the wavelengths andamplitudes of the two traveling waves. We experimentally testthe omega turn on a snake robot, and show that this turninggait outperforms previous turning gaits: it results in a largerangular displacement and a smaller area swept by the bodyover a gait cycle, allowing the robot to turn in highly confinedspaces.more » « less
-
The gaits of locomoting systems are typically designed to maximize some sort of efficiency, such as cost of transport or speed. Equally important is the ability to modulate such a gait to effect turning maneuvers. For drag-dominated systems, geometric mechanics provides an elegant and practical framework for both ends—gait design and gait modulation. Within this framework, “constraint curvature” maps can be used to approximate the net displacement of robotic systems over cyclic gaits. Gait optimization is made possible under a previously reported “soap-bubble” algorithm. In this work, we propose both local and global gait morphing algorithms to modify a nominal gait to provide single-parameter steering control. Using a simplified swimmer, we numerically compare the two approaches and show that for modest turns, the local approach, while suboptimal, nevertheless proves effective for steering control. A potential advantage of the local approach is that it can be readily applied to soft robots or other systems where local approximations to the constraint curvature can be garnered from data, but for which obtaining an exact global model is infeasible.more » « less
-
Abstract Chiral materials with strong linear anisotropies are difficult to accurately characterize with circular dichroism (CD) because of artifactual contributions to their spectra from linear dichroism (LD) and birefringence (LB). Historically, researchers have used a second‐order Taylor series expansion on the Mueller matrix to model the LDLB interaction effects on the spectra in conventional materials, but this approach may no longer be sufficient to account for the artifactual CD signals in emergent materials. In this work, we present an expression to model the measured CD using a third‐order expansion, which introduces “pairwise interference” terms that, unlike the LDLB terms, cannot be averaged out of the signal. We find that the third‐order pairwise interference terms can make noticeable contributions to the simulated CD spectra. Using numerical simulations of the measured CD across a broad range of linear and chiral anisotropy parameters, the LDLB interactions are most prominent in samples that have strong linear anisotropies (LD, LB) but negligible chiral anisotropies, where the measured CD strays from the chirality‐induced CD by factors greater than 103. Additionally, the pairwise interactions are most significant in systems with moderate‐to‐strong chiral and linear anisotropies, where the measured CD is inflated twofold, a figure that grows as linear anisotropies approach their maximum. In summary, media with moderate‐to‐strong linear anisotropy are in great danger of having their CD altered by these effects in subtle manners. This work highlights the significance of considering distortions in CD measurements through higher‐order pairwise interference effects in highly anisotropic nanomaterials.more » « less
-
Abstract Snakes and their bio-inspired robot counterparts have demonstrated locomotion on a wide range of terrains. However, dynamic vertical climbing is one locomotion strategy that has received little attention in the existing snake robotics literature. We demonstrate a new scansorial gait and robot inspired by the locomotion of the Pacific lamprey. This new gait allows a robot to steer while climbing on flat, near-vertical surfaces. A reduced-order model is developed and used to explore the relationship between body actuation and the vertical and lateral motions of the robot. Trident, the new wall climbing lamprey-inspired robot, demonstrates dynamic climbing on a flat near vertical carpeted wall with a peak net vertical stride displacement of 4.1 cm per step. Actuating at 1.3 Hz, Trident attains a vertical climbing speed of 4.8 cm s−1(0.09 Bl s−1) at specific resistance of 8.3. Trident can also traverse laterally at 9 cm s−1(0.17 Bl s−1). Moreover, Trident is able to make 14% longer strides than the Pacific lamprey when climbing vertically. The computational and experimental results demonstrate that a lamprey-inspired climbing gait coupled with appropriate attachment is a useful climbing strategy for snake robots climbing near vertical surfaces with limited push points.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1109/ICRA46639.2022.9812130
