An official website of the United States government
The relationships between brittle detachment faulting and ductile shear zones in metamorphic core complexes are often ambiguous. Although it is commonly assumed that these two structures are kinematically linked and genetically related, direct observations of this coupling are rare. Here, we conducted a detailed field investigation to probe the connection between a detachment fault and mylonitic shear zone in the Ruby Mountain–East Humboldt Range metamorphic core complex, northeast Nevada. Field observations, along with new and published geochronology, demonstrate that Oligocene top-to-the-west mylonitic shear zones are crosscut by ca. 17 Ma subvertical basalt dikes, and these dikes are in turn truncated by middle Miocene detachment faults. The detachment faults appear to focus in preexisting weak zones in shaley strata and Mesozoic thrust faults. We interpret that the Oligocene mylonitic shear zones were generated in response to domal upwelling during voluminous plutonism and partial melting, which significantly predated the middle Miocene onset of regional extension and detachment slip. Our model simplifies mechanical issues with low-angle detachment faulting because there was an initial dip to the weak zones exploited by the future detachment-fault zone. This mechanism may be important for many apparent low-angle normal faults in the eastern Great Basin. We suggest that the temporal decoupling of mylonitic shearing and detachment faulting may be significant and underappreciated for many of the metamorphic core complexes in the North American Cordillera. In this case, earlier Eocene–Oligocene buoyant doming may have preconditioned the crust to be reactivated by Miocene extension thus explaining the spatial relationship between structures.
more »
« less
How a strong low-angle normal fault formed: The Whipple detachment, southeastern California
Abstract Many low-angle normal faults (dip ≤30°) accommodate tens of kilometers of crustal extension, but their mechanics remain contentious. Most models for low-angle normal fault slip assume vertical maximum principal stress σ1, leading many authors to conclude that low-angle normal faults are poorly oriented in the stress field (≥60° from σ1) and weak (low friction). In contrast, models for low-angle normal fault formation in isotropic rocks typically assume Coulomb failure and require inclined σ1 (no misorientation). Here, a data-based, mechanical-tectonic model is presented for formation of the Whipple detachment fault, southeastern California. The model honors local and regional geologic and tectonic history and laboratory friction measurements. The Whipple detachment fault formed progressively in the brittle-plastic transition by linking of “minidetachments,” which are small-scale analogs (meters to kilometers in length) in the upper footwall. Minidetachments followed mylonitic anisotropy along planes of maximum shear stress (45° from the maximum principal stress), not Coulomb fractures. They evolved from mylonitic flow to cataclasis and frictional slip at 300–400 °C and ∼9.5 km depth, while fluid pressure fell from lithostatic to hydrostatic levels. Minidetachment friction was presumably high (0.6–0.85), based upon formation of quartzofeldspathic cataclasite and pseudotachylyte. Similar mechanics are inferred for both the minidetachments and the Whipple detachment fault, driven by high differential stress (∼150–160 MPa). A Mohr construction is presented with the fault dip as the main free parameter. Using “Byerlee friction” (0.6–0.85) on the minidetachments and the Whipple detachment fault, and internal friction (1.0–1.7) on newly formed Reidel shears, the initial fault dips are calculated at 16°–26°, with σ1 plunging ∼61°–71° northeast. Linked minidetachments probably were not well aligned, and slip on the evolving Whipple detachment fault probably contributed to fault smoothing, by off-fault fracturing and cataclasis, and to formation of the fault core and fractured damage zone. Stress rotation may have occurred only within the mylonitic shear zone, but asymmetric tectonic forces applied to the brittle crust probably caused gradual rotation of σ1 above it as a result of: (1) the upward force applied to the base of marginal North America by buoyant asthenosphere upwelling into an opening slab-free window and/or (2) basal, top-to-the-NE shear traction due to midcrustal mylonitic flow during tectonic exhumation of the Orocopia Schist. The mechanical-tectonic model probably applies directly to low-angle normal faults of the lower Colorado River extensional corridor, and aspects of the model (e.g., significance of anisotropy, stress rotation) likely apply to formation of other strong low-angle normal faults.
more »
« less
- Award ID(s):
- 1516680
- PAR ID:
- 10394675
- Date Published:
- Journal Name:
- GSA Bulletin
- Volume:
- 132
- Issue:
- 9-10
- ISSN:
- 0016-7606
- Page Range / eLocation ID:
- 1817 to 1828
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Robles, F.; Schwartz, J.; Miranda, E.; Klepeis, K.; and Mora-Klepeis, G. (Ed.)Ancient basement rocks in Southern California contain mechanical anisotropies that may influence the architecture of Quaternary faulting. We study exposed basement rocks found within the southeastern San Gabriel lithotectonic block with the intention of reconciling the relationship between inherited ductile fabrics and the geometry of Quaternary faults that are part of the San Andreas Fault system. By focusing our study on the southeastern corner of the San Gabriel block we can study the exposed lower- to middle crustal shear zone fabrics near where the Cucamonga Fault and the San Jacinto Fault intersect. The brittle Quaternary Cucamonga Thrust Fault strikes E-W and dips to the north-northeast (35-25°) and is localized at the range front and cuts these older fabrics, however there is also brittle deformation distal from the fault that also affects the sequence of lower- to middle crustal (6-8 kbar) granulite- to upper amphibolite facies mylonite and granulite-facies metasedimentary rocks. Near the Cucamonga Fault, mylonitic fabrics strike E-W and dip northeast (40-50°). Quaternary brittle faults that strike E-W and dip northeast (30-40°) reactivate the mvlonites and slickenlines and record a sinistral, top-to-the-west sense of shear. Investigation of host rocks indicates that they formed in the roots of a continental arc which was active from the Middle Jurassic to Late Cretaceous (172-86 Ma) at 740-800°C. Ductile deformation was associated with granulite-facies metamorphism at approximately 30 km depth during the Late Cretaceous (88-74 Ma) at 730-800 °C. Our work shows that the exhumed Late Cretaceous mylonitic fabrics may have operated as stress guides during Quaternary faulting in the Cucamonga Fault zone. We conclude that these lower crustal fabrics influence the geometry and kinematics of late Cenozoic faulting of the Cucamonga and San Jacinto fault zones.more » « less
-
Abstract Despite a lack of modern large earthquakes on shallowly dipping normal faults, Holocene M w > 7 low-angle normal fault (LANF; dip<30°) ruptures are preserved paleoseismically and inferred from historical earthquake and tsunami accounts. Even in well-recorded megathrust earthquakes, the effects of non-linear off-fault plasticity and dynamically reactivated splay faults on shallow deformation and surface displacements, and thus hazard, remain elusive. We develop data-constrained 3D dynamic rupture models of the active Mai’iu LANF that highlight how multiple dynamic shallow deformation mechanisms compete during large LANF earthquakes. We show that shallowly-dipping synthetic splays host more coseismic slip and limit shallow LANF rupture more than steeper antithetic splays. Inelastic hanging-wall yielding localizes into subplanar shear bands indicative of newly initiated splay faults, most prominently above LANFs with thick sedimentary basins. Dynamic splay faulting and sediment failure limit shallow LANF rupture, modulating coseismic subsidence patterns, near-shore slip velocities, and the seismic and tsunami hazards posed by LANF earthquakes.more » « less
-
Abstract The Sangre de Cristo Range in southern Colorado exposes some of the deepest Cenozoic structural levels in the Rocky Mountain region, including mylonitic shear zones associated with both the Laramide orogeny and Rio Grande rift. We investigated the relation between Laramide contraction and Rio Grande rift extension with detailed geologic mapping, kinematic analysis, and geochronometry in a 50 km2 area centered on the Independence Mine shear zone (IMSZ). The 15–100-m-thick IMSZ is one of several shallowly to moderately (~45° ± 20°) W-SW–dipping brittle-plastic shear zones along the western flank of the range. These shear zones display microstructural evidence of initiation as top-NE contractional mylonite zones, consistent with regional Laramide kinematics, which have been pervasively overprinted by shear fabrics indicating top-SW extensional reactivation. Both top-NE and top-SW shear fabrics involve cataclasis and quartz dislocation creep, although top-SW shear is more commonly localized along phyllosilicate-lined shear bands. Shear zones are hosted predominately within Proterozoic gneiss, and contain abundant chlorite and white mica derived from alteration of hornblende and feldspar, which indicates that weakening driven by fluid reactions played an important role in localizing strain. Extensional overprinting appears to be most pervasive along more steeply dipping portions of shear zones and where secondary phyllosilicates form an interconnected weak phase, which suggests that reactivation was primarily controlled by geometry and rheological contrasts inherited from contraction. One top-SW shear zone adjacent to the IMSZ cuts a late Oligocene gabbro stock, and monazite grains synkinematic with top-SW shear in the IMSZ yielded late Oligocene to Early Miocene U-Th-Pb dates that correspond with initiation of the Rio Grande rift. Reactivation of weak reverse faults may represent an important structural control during initial extension in the middle crust, prior to slip along the high-angle Sangre de Cristo normal fault system.more » « less
-
The frictional properties of faults control the initiation and propagation of earthquakes and the associated hazards. Although the ambient temperature and instantaneous slip velocity controls on friction in isobaric conditions are increasingly well understood, the role of normal stress on steady‐state and transient frictional behaviors remains elusive. The friction coefficient of rocks exhibits a strong dependence on normal stress at typical crustal depths. Furthermore, rapid changes in normal stress cause a direct effect on friction followed by an evolutionary response. Here, we derive a constitutive friction law that consistently explains the yield strength of rocks from atmospheric pressure to gigapascals while capturing the transient behavior following perturbations in normal stress. The model explains the frictional strength of a variety of sedimentary, metamorphic, and igneous rocks and the slip‐dependent response upon normal stress steps of Westerly granite bare contact and synthetic gouges made of quartz and a mixture of quartz and smectite. The nonlinear normal stress dependence of the frictional resistance may originate from the distribution of asperities that control the real area of contact. The direct and transient effects may be important for induced seismicity by hydraulic fracturing or for naturally occurring normal stress perturbations within fault zones in the brittle crust.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1130/B35386.1
