Abstract Geometrically frustrated assembly has emerged as an attractive paradigm for understanding and engineering assemblies with self-limiting, finite equilibrium dimensions. We propose and study a novel 2D particle based on a so-called ‘warped jigsaw’ (WJ) shape design: directional bonds in a tapered particle favor curvature along multi-particle rows that frustrate 2D lattice order. We investigate how large-scale intra-assembly stress gradients emerge from the microscopic properties of the particles using a combination of numerical simulation and continuum elasticity. WJ particles can favor anisotropic ribbon assemblies, whose lateral width may be self-limiting depending on the relative strength of cohesive to elastic forces in the assembly, which we show to be controlled by the range of interactions and degree of shape misfit. The upper limits of self-limited size are controlled by the crossover between two elastic modes in assembly: the accumulation of shear with increasing width at small widths giving way to unbending of preferred row curvature, permitting assembly to grow to unlimited sizes. We show that the stiffness controlling distinct elastic modes is governed by combination and placement of repulsive and attractive binding regions, providing a means to extend the range of accumulating stress to sizes that are far in excess of the single particle size, which we corroborate via numerical studies of discrete particles of variable interactions. Lastly, we relate the ground-state energetics of the model to lower and upper limits on equilibrium assembly size control set by the fluctuations of width along the ribbon boundary.
more »
« less
Building blocks of non-Euclidean ribbons: size-controlled self-assembly via discrete frustrated particles
Geometric frustration offers a pathway to soft matter self-assembly with controllable finite sizes. While the understanding of frustration in soft matter assembly derives almost exclusively from continuum elastic descriptions, a current challenge is to understand the connection between microscopic physical properties of misfitting “building blocks” and emergent assembly behavior at the mesoscale. We present and analyze a particle-based description of what is arguably the best studied example for frustrated soft matter assembly, negative-curvature ribbon assembly, observed in both assemblies of chiral surfactants and shape-frustrated nanoparticles. Based on our particle model, known as saddle wedge monomers, we numerically test the connection between microscopic shape and interactions of the misfitting subunits and the emergent behavior at the supra-particle scale, specifically focussing on the propagation and relaxation of inter-particle strains, the emergent role of extrinsic shape on frustrated ribbons and the equilibrium regime of finite width selection. Beyond the intuitive role of shape misfit, we show that self-limitation is critically dependent on the finite range of cohesive interactions, with larger size finite assemblies requiring increasing short-range interparticle forces. Additionally, we demonstrate that non-linearities arising from discrete particle interactions alter self-limiting behavior due to both strain-softening in shape-flattened assembly and partial yielding of highly strained bonds, which in turn may give rise to states of hierarchical, multidomain assembly. Tracing the regimes of frustration-limited assembly to the specific microscopic features of misfitting particle shapes and interactions provides necessary guidance for translating the theory of size-programmable assembly into design of intentionally-frustrated colloidal particles.
more »
« less
- Award ID(s):
- 2028885
- NSF-PAR ID:
- 10394988
- Publisher / Repository:
- Royal Society of Chemistry
- Date Published:
- Journal Name:
- Soft Matter
- Volume:
- 19
- Issue:
- 5
- ISSN:
- 1744-683X
- Page Range / eLocation ID:
- 858 to 881
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
In self-assembling systems, geometric frustration leads to complex states characterized by internal gradients of shape misfit. Frustrated assemblies have drawn recent interest due to the unique possibility that their thermodynamics can sense and select the finite size of assembly at length scales much larger than constituent building blocks or their interactions. At present, self-limitation is chiefly understood to derive from zero-temperature considerations, specifically the competition between cohesion and scale-dependent elastic costs of frustration. While effects of entropy and finite-temperature fluctuations are necessarily significant for self-assembling systems, their impact on the self-limiting states of frustrated assemblies is not known. We introduce a generic, minimal model of frustrated assembly and establish its finite-temperature and concentration-dependent thermodynamics by way of simulation and continuum theory. The phase diagram is marked by three distinct states of translation order: a dispersed vapor, a defect-riddled condensate, and the self-limiting aggregate state. We show that, at finite temperature, the self-limiting state is stable at intermediate frustration. Furthermore, in contrast to the prevailing picture, its thermodynamic boundaries with the macroscopic disperse and bulk states are temperature controlled, pointing to the essential importance of translational and conformational entropy in their formation.more » « less
-
The ordering of nanoparticles into predetermined configurations is of importance to the design of advanced technologies. Here, we balance the interfacial energy of nanoparticles against the elastic energy of cholesteric liquid crystals to dynamically shape nanoparticle assemblies at a fluid interface. By adjusting the concentration of surfactant that plays the dual role of tuning the degree of nanoparticle hydrophobicity and altering the molecular anchoring of liquid crystals, we pattern nanoparticles at the interface of cholesteric liquid crystal emulsions. In this system, interfacial assembly is tempered by elastic patterns that arise from the geometric frustration of confined cholesterics. Patterns are tunable by varying both surfactant and chiral dopant concentrations. Adjusting the particle hydrophobicity more finely by regulating the surfactant concentration and solution pH further modifies the rigidity of assemblies, giving rise to surprising assembly dynamics dictated by the underlying elasticity of the cholesteric. Because particle assembly occurs at the interface with the desired structures exposed to the surrounding water solution, we demonstrate that particles can be readily cross-linked and manipulated, forming structures that retain their shape under external perturbations. This study serves as a foundation for better understanding inter-nanoparticle interactions at interfaces by tempering their assembly with elasticity and for creating materials with chemical heterogeneity and linear, periodic structures, essential for optical and energy applications.more » « less
-
Structural distortions such as cation off-centering are frustrated in the pyrochlore structure due to the triangular arrangement of cations on the pyrochlore lattice. This geometric constraint inhibits a transition from a paraelectric to ferroelectric phase in majority of pyrochlore oxide materials. Few pyrochlore materials can overcome this frustration and exhibit polar crystal structures, and unraveling the origin of such leads to the understanding of polarity in complex materials. Herein we hypothesize that frustration on the pyrochlore lattice can be relieved through A -site doping with rare earth cations that do not possess stereochemically active lone pairs. To assess if frustration is relieved, we have analyzed cation off-centering in various Bi 2−x RE xTi 2 O 7 ( RE = Y 3+ , Ho 3+ ) pyrochlores through neutron and X-ray total scattering. Motivated by known distortions from the pyrochlore literature, we present our findings that most samples show local distortions similar to the β-cristobalite structure. We additionally comment on the complexity of factors that play a role in the structural behavior, including cation size, bond valence, electronic structure, and magnetoelectronic interactions. We posit that the addition of magnetic cations on the pyrochlore lattice may play a role in an extension of the real-space correlation length of electric dipoles in the Bi-Ho series, and offer considerations for driving long-range polarity on the pyrochlore lattice.more » « less
-
The digital alchemy framework is an extended ensemble simulation technique that incorporates particle attributes as thermodynamic variables, enabling the inverse design of colloidal particles for desired behavior. Here, we extend the digital alchemy framework for the inverse design of patchy spheres that self-assemble into target crystal structures. To constrain the potentials to non-trivial solutions, we conduct digital alchemy simulations with constant second virial coefficient. We optimize the size, range, and strength of patchy interactions in model triblock Janus spheres to self-assemble the 2D kagome and snub square lattices and the 3D pyrochlore lattice, and demonstrate self-assembly of all three target structures with the designed models. The particles designed for the kagome and snub square lattices assemble into high quality clusters of their target structures, while competition from similar polymorphs lower the yield of the pyrochlore assemblies. We find that the alchemically designed potentials do not always match physical intuition, illustrating the ability of the method to find nontrivial solutions to the optimization problem. We identify a window of second virial coefficients that result in self-assembly of the target structures, analogous to the crystallization slot in protein crystallization.more » « less
