skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: A Needle-free Transdermal Patch for Sampling Interstitial Fluid
Modern diagnostics is pivoting towards less invasive health monitoring in dermal interstitial fluid, rather than blood or urine. However, the skin’s outermost layer, the stratum corneum, makes accessing the fluid more difficult without invasive, needle-based technology. Simple, minimally invasive means for surpassing this hurdle are needed. Methods: To address this problem, a flexible, Band-Aid-like patch for sampling interstitial fluid was developed and tested. This patch uses simple resistive heating elements to thermally porate the stratum corneum, allowing the fluid to exude from the deeper skin tissue without applying external pressure. Fluid is then transported to an on-patch reservoir through selfdriving hydrophilic microfluidic channels. Results: Testing with living, ex-vivo human skin models demonstrated the device’s ability to rapidly collect sufficient interstitial fluid for biomarker quantification. Further, finite-element modeling showed that the patch can porate the stratum corneum without raising the skin’s temperature to paininducing levels in the nerve-laden dermis. Conclusion: Relying only on simple, commercially scalable fabrication methods, this patch outperforms the collection rate of various microneedle-based patches, painlessly sampling a human bodily fluid without entering the body. Significance: The technology holds potential as a clinical device for an array of biomedical applications, especially with the integration of on-patch testing.  more » « less
Award ID(s):
1938995
PAR ID:
10401082
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
IEEE Transactions on Biomedical Engineering
ISSN:
0018-9294
Page Range / eLocation ID:
1 to 8
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Journal of Pharmaceutical Sciences)
    This study probes the mechanisms by which volatile solvents (water, ethanol) and a nonionic surfactant (Triton X-100) influence the skin permeation of dissolved solutes following deposition of small doses onto unoccluded human skin. A secondary objective was to sharpen guidelines for the use of these and other simple solvent systems for dermal safety testing of cosmetic ingredients at finite doses. Four solutes were studied – niacinamide, caffeine, testosterone and geraniol – at doses close to that estimated to saturate the upper layers of the stratum corneum. Methods included tensiometry, visualization of spreading on skin, polarized light microscopy and in vitro permeation testing using radiolabeled solutes. Ethanol, aqueous ethanol and dilute aqueous Triton solutions all yielded surface tensions below 36 mN/m, allowing them to spread easily on the skin, unlike water (72.4 mN/m) which did not spread. Deposition onto skin of niacinamide (32 ug·cm^2) or caffeine (3.2 ug·cm^2) from water and ethanol led to crystalline deposits on the skin surface, whereas the same amounts applied from aqueous ethanol and 2% Triton did not. Skin permeation of these compounds was inversely correlated to the extent of crystallization. A separate study with caffeine showed the absence of a dose-related skin permeability increase with Triton. Permeation of testosterone (8.2 ug·cm^2) was modestly increased when dosed from aqueous ethanol versus ethanol. Permeation of geraniol (2.9 ug·cm^2) followed the order aqueous ethanol > water ~ 2% Triton >> ethanol and was inversely correlated with evaporative loss. We conclude that, under the conditions tested, aqueous ethanol and Triton serve primarily as deposition aids and do not substantially disrupt stratum corneum lipids. Implications for the design of in vitro skin permeability tests are discussed. 
    more » « less
  2. ; ; ; (, Pharmaceutics)
    Microneedle (MN) technology is an optimal choice for the delivery of drugs via the transdermal route, with a minimally invasive procedure. MN applications are varied from drug delivery, cosmetics, tissue engineering, vaccine delivery, and disease diagnostics. The MN is a biomedical device that offers many advantages including but not limited to a painless experience, being time-effective, and real-time sensing. This research implements additive manufacturing (AM) technology to fabricate MN arrays for advanced therapeutic applications. Stereolithography (SLA) was used to fabricate six MN designs with three aspect ratios. The MN array included conical-shaped 100 needles (10 × 10 needle) in each array. The microneedles were characterized using optical and scanning electron microscopy to evaluate the dimensional accuracy. Further, mechanical and insertion tests were performed to analyze the mechanical strength and skin penetration capabilities of the polymeric MN. MNs with higher aspect ratios had higher deformation characteristics suitable for penetration to deeper levels beyond the stratum corneum. MNs with both 0.3 mm and 0.4 mm base diameters displayed consistent force–displacement behavior during a skin-equivalent penetration test. This research establishes guidelines for fabricating polymeric MN for high-accuracy and low-cost 3D printing. 
    more » « less
  3. ; ; ; (, Microbiology Spectrum)
    Claesen, Jan (Ed.)
    ABSTRACT Atopic dermatitis (AD) is associated with a deficiency of skin lipids, increased populations of Staphylococcus aureus in the microbiome, and structural defects in the stratum corneum (SC), the outermost layer of human skin. However, the pathogenesis of AD is ambiguous, as it is unclear whether observed changes are the result of AD or contribute to the pathogenesis of the disease. Previous studies have shown that S. aureus is capable of permeating across isolated human SC tissue when lipids are depleted to levels consistent with AD conditions. In this study, we expand upon this discovery to determine the mechanisms and implications of bacterial penetration into the SC barrier. Specifically, we establish if bacteria are permeating intercellularly or employing a combination of both inter- and intracellular travel. The mechanical implications of bacterial invasion, lipid depletion, and media immersion are also evaluated using a newly developed, physiologically relevant, temperature-controlled drip chamber. Results reveal for the first time that S. aureus can be internalized by corneocytes, indicating transcellular movement through the tissue during permeation, consistent with previous theoretical models. S. aureus also degrades the mechanical integrity of human SC, particularly when the tissue is partially depleted of lipids. These observed mechanical changes are likely the cause of broken or ruptured tissue seen as exudative lesions in AD flares. This work further highlights the necessity of lipids in skin microbial barrier function. IMPORTANCE Millions of people suffer from the chronic inflammatory skin disease atopic dermatitis (AD), whose symptoms are associated with a deficiency of skin lipids that exhibit antimicrobial functions and increased populations of the opportunistic pathogen Staphylococcus aureus . However, the pathogenesis of AD is ambiguous, and it remains unclear if these observed changes are merely the result of AD or contribute to the pathogenesis of the disease. In this article, we demonstrate the necessity of skin lipids in preventing S. aureus from penetrating the outermost barrier of human skin, thereby causing a degradation in tissue integrity. This bacterial permeation into the viable epidermis could act as an inflammatory trigger of the disease. When coupled with delipidated AD tissue conditions, bacterial permeation can also explain increased tissue fragility, potentially causing lesion formation in AD patients that results in further enhancing bacterial permeability across the stratum corneum and the development of chronic conditions. 
    more » « less
  4. ; ; ; ; (, Small Science)
    Currently available point‐of‐care systems for body fluid collection exhibit poor integration with sensors. Herein, the design of a disposable device for interstitial fluid (ISF) extraction as well as glucose, lactate, and potassium ion (K+) monitoring is reported on. It is minimally invasive and appropriate for single use, minimizing the risk of infection to the user. This microscale device contains a 3D‐printed cap‐like structure with a four‐by‐four microneedle (MN) array, bioreceptor‐modified carbon fiber (CF)‐sensing surface, and negative pressure convection technology. These features are incorporated within a compact, self‐contained, and manually operated microscale device, which is capable of withdrawing ≈3.0 μL of ISF from the skin. MN arrays applied with an upward driving force may increase the ISF flow rate. Moreover, functionalized CF working electrodes (WE1, WE2, WE3) are shown to selectively detect lactate, glucose, and K+with high sensitivities of 0.258, 0.549, and 0.657 μA μm−1 cm−2and low detection limits of 0.01, 0.080, 0.05 μm, respectively. Ex vivo testing on porcine skin is used to detect the ISF levels of the biomarkers. The microscale device can be a replacement for current point‐of‐care diagnostic approaches. 
    more » « less
  5. ; ; ; ; ; ; (, Journal of The Royal Society Interface)
    Sweat secretion and evaporation from the skin dictate the human ability to thermoregulate and thermal comfort in hot environments and impact skin interactions with cosmetics, textiles and wearable electronics/sensors. However, sweating has mostly been investigated using macroscopic physiological methods, leaving micro-to-macroscale sweating dynamics unexplored. We explore these processes by using a coupled micro-imaging and transport measurement approach used in engineering studies of phase change processes. Specifically, we used a comprehensive set of ‘macroscale’ physiological measurements (ventilated capsule sweat rate (SR), galvanic skin conductance and dielectric epidermis hydration) complemented by three microscale imaging techniques (visible light, midwave infrared and optical coherence tomography imaging). Inspired by industrial jet cooling devices, we also explore an ‘air jet’ (versus cylindrical) capsule for measuring SR. To enable near-simultaneous application of these methods, we studied forehead sweating dynamics of six supine subjects undergoing passive heating, cooling and secondary heating. The relative dynamics of the physiological measurements agree with prior observations and can be explained using imaged microscale sweating dynamics. This comprehensive study provides new insights into the biophysical dynamics of sweating onset and following cyclic porewise, transition and filmwise sweating modes and highlights the roles of stratum corneum hydration, salt deposits and microscale hair. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email