skip to main content

Title: Effect of strand molecular length on mechanochemical transduction in elastomers probed with uniform force sensors
The mechanical properties of a polymer network reflect the collective behavior of all of the constituent strands within the network. These strands comprise a distribution of states, and a central question is how the deformation and tension experienced by a strand is influenced by strand length. Here, we address this question through the use of mechanophore force probes with discrete molecular weights. Probe strands, each bearing a mechanochromic spiropyran (SP), were prepared through an iterative synthetic strategy, providing uniform PDMS-functionalized SP force probes with molecular weights of 578, 1170, and 2356 g/mol. The probes were each doped (9 mM) into the same silicone elastomer matrix. Upon stretching, the materials change color, consistent with the expected conversion of SP to merocyanine (MC). The critical strain at which measurable mechanochromism is observed is correlated with the strain hardening of the matrix, but it is independent of the molecular length of the probe strand. When a network with activated strands is relaxed, the color dissipates, and the rate of decoloration varies as a function of the relaxing strain ((ε_r ) ̅); faster decoloration occurs at lower (ε_r ) ̅. The dependence of decoloration rate on (ε_r ) ̅ is taken to reflect the effect of residual tension in the once-activated strands on the reversion reaction of MC to SP, and the effect of that residual tension is indistinguishable across the three molecular lengths examined. The combination of discrete strand synthesis and mechanochromism provides a foundation to further test and develop molecular-based theories of elasticity and fracture in polymer networks.  more » « less
Award ID(s):
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
Polymer Chemistry
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Most elastomers undergo strain‐induced crystallization (SIC) under tension; as individual chains are held rigidly in a fixed position by an applied strain, their alignment along the strain field results in a shift from strain‐hardening (SH) to SIC. A similar degree of stretching is associated with the tension necessary to accelerate mechanically coupled, covalent chemical responses of mechanophores in overstretched chains, raising the possibility of an interplay between the macroscopic response of SIC and the molecular response of mechanophore activation. Here, thiol‐yne‐derived stereoelastomers doped covalently with a dipropiolate‐derivatized spiropyran (SP) mechanophore (0.25–0.38 mol%) are reported. The material properties of SP‐containing films are consistent with undoped controls, indicating that the SP is a reporter of the mechanical state of the polymer. Uniaxial tensile tests reveal correlations between mechanochromism and SIC, which are strain‐rate‐dependent. When mechanochromic films are stretched slowly to the point of mechanophore activation, the covalently tethered mechanophore remains trapped in a force‐activated state, even after the applied stress is removed. Mechanophore reversion kinetics correlate with the applied strain rate, resulting in highly tunable decoloration rates. Because these polymers are not covalently crosslinked, they are recyclable by melt‐pressing into new films, increasing their potential range of strain‐sensing, morphology‐sensing, and shape‐memory applications.

    more » « less
  2. null (Ed.)
    A mechanochemistry based approach is proposed to detect and map stress history during dynamic processes. Spiropyran (SP), a force sensitive molecular probe, was incorporated as a crosslinker into multiple network elastomers (MNE). When these mechanochromic MNEs are loaded, SP undergoes a well-known force-activated reaction to merocyanine (MC) changing its absorption in the visible range (visible blue color). This SP to MC transition is not reversible within the time frame of the experiment and the color change reports the concentration of activated molecules. During subsequent loading–unloading cycles the MC undergoes a fast and reversible isomerization resulting in a slight shift of absorption spectrum and results in a second color change (blue to purple color corresponding to the loading–unloading cycles). Quantification of the color changes by using chromaticity shows that the exact color observed upon unloading is characteristic not only of the current stress (reported by the shift in color due to MC isomerization), but of the maximum stress that the material has seen during the loading cycle (reported by the shift in color due to the change in MC concentration). We show that these two color changes can be separated unambiguously and we use them to map the stress history in the loading and unloading process occurring as a crack opens up and propagates, breaking the material. Color maps on fractured samples are compared with finite element simulations and the agreement is excellent. 
    more » « less
  3. We present a modified Lake–Thomas theory that accounts for the molecular details of network connectivity upon crack propagation in polymer networks. This theory includes not only the energy stored in the breaking network strands (bridging strands) but also the energy stored in the tree-like structure of the strands connecting the bridging strands to the network continuum, which remains intact as the crack propagates. The energy stored in each of the generations of this tree depends nonmonotonically on the generation index due to the nonlinear elasticity of the stretched network strands. Further, the energy required to break a single bridging strand is not necessarily dominated by the energy stored in the bridging strand itself but in the higher generations of the tree. We describe the effect of mechanophores with stored length on the energy stored in the tree-like structure. In comparison with the “strong” mechanophores that can only be activated in the bridging strand, “weak” mechanophores that can be activated both in the bridging strand and in other generations could provide more energy dissipation due to their larger contribution to higher generations of the tree. 
    more » « less
  4. Slide-ring gels are polymer networks with cross-links that can slide along the chains. In contrast to conventional unentangled networks with cross-links fixed along the chains, the slide-ring networks are strain-softening and distribute tension much more uniformly between their strands due to the so-called “pulley effect”. The sliding of cross-links also reduces the elastic modulus in comparison with the modulus of conventional networks with the same number density of cross-links and elastic strands. We develop a single-chain model to account for the redistribution of monomers between network strands of a primary chain. This model takes into account both the pulley effect and fluctuations in the number of monomers per network strand. The pulley effect leads to modulus reduction and uniform tension redistribution between network strands, while fluctuations in the number of strand monomers dominate the strain-softening, the magnitude of which decreases upon network swelling and increases upon deswelling. 
    more » « less
  5. Cells are physically contacting with each other. Direct and precise quantification of forces at cell–cell junctions is still challenging. Herein, we have developed a DNA-based ratiometric fluorescent probe, termed DNAMeter, to quantify intercellular tensile forces. These lipid-modified DNAMeters can spontaneously anchor onto live cell membranes. The DNAMeter consists of two self-assembled DNA hairpins of different force tolerance. Once the intercellular tension exceeds the force tolerance to unfold a DNA hairpin, a specific fluorescence signal will be activated, which enables the real-time imaging and quantification of tensile forces. Using E-cadherin-modified DNAMeter as an example, we have demonstrated an approach to quantify, at the molecular level, the magnitude and distribution of E-cadherin tension among epithelial cells. Compatible with readily accessible fluorescence microscopes, these easy-to-use DNA tension probes can be broadly used to quantify mechanotransduction in collective cell behaviors. 
    more » « less