skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Smart Window Structures Based on Highly Conductive, Transparent Metal Nanomeshes and Thermochromic Perovskite Films
Abstract Smart windows are energy‐efficient windows whose optical transparency can be switched between highly transparent and opaque states in response to incident solar illumination. Transparent and conductive metal nanomesh (NM) films are promising candidates for thermochromic smart windows due to their excellent thermal conductivity, high optical transparency at near infrared wavelengths, and outstanding stability. In this study, ZnO/Au/Al2O3NM films with periodicities of 200 and 370 nm are reported. The ZnO/Au/Al2O3NM film with a 370 nm periodicity exhibits a transmittance over 90% at 550 nm and sheet resistance lower than 20 Ω sq−1. Based on a standard figure of merit, this structure outperforms current state‐of‐the‐art NM films. Here, the integration of ZnO/Au/Al2O3NM films into a thermochromic perovskite smart window is also demonstrated. The transparency of the smart window structure is manipulated by transient resistive heating to trigger the thermochromic transition to the opaque state, which can be then maintained solely by 1‐sun, AM 1.5 G illumination. This climate‐adaptive, low power‐activated, and fast‐switching smart window structure opens new pathways toward its practical application in the real world.  more » « less
Award ID(s):
2109842 1720595
PAR ID:
10402028
Author(s) / Creator(s):
 ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Optical Materials
Volume:
11
Issue:
6
ISSN:
2195-1071
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; (, Nanoscale)
    null (Ed.)
    Two-dimensional (2D) transition metal dichalcogenide (TMD) layers have gained increasing attention for a variety of emerging electrical, thermal, and optical applications. Recently developed metallic 2D TMD layers have been projected to exhibit unique attributes unattainable in their semiconducting counterparts; e.g. , much higher electrical and thermal conductivities coupled with mechanical flexibility. In this work, we explored 2D platinum ditelluride (2D PtTe 2 ) layers – a relatively new class of metallic 2D TMDs – by studying their previously unexplored electro-thermal properties for unconventional window applications. We prepared wafer-scale 2D PtTe 2 layer-coated optically transparent and mechanically flexible willow glasses via a thermally-assisted tellurization of Pt films at a low temperature of 400 °C. The 2D PtTe 2 layer-coated windows exhibited a thickness-dependent optical transparency and electrical conductivity of >10 6 S m −1 – higher than most of the previously explored 2D TMDs. Upon the application of electrical bias, these windows displayed a significant increase in temperature driven by Joule heating as confirmed by the infrared (IR) imaging characterization. Such superior electro-thermal conversion efficiencies inherent to 2D PtTe 2 layers were utilized to demonstrate various applications, including thermochromic displays and electrically-driven defogging windows accompanying mechanical flexibility. Comparisons of these performances confirm the superiority of the wafer-scale 2D PtTe 2 layers over other nanomaterials explored for such applications. 
    more » « less
  2. ; ; ; ; ; ; ; (, Advanced Energy Materials)
    Abstract Dynamic windows allow user control over light and heat flow to save energy and maximize comfort. Reversible metal electrodeposition (RME) dynamic windows can uniquely tint to a color‐neutral privacy state (0.1% visible light transmission). The design parameters of transparent metal mesh counter electrodes for high‐contrast RME dynamic windows: high transparency, charge capacity and surface area with low haze, sheet resistance and cost are discussed, concluding that woven metal meshes meet these design parameters. Electroplated current is measured on an indium tin oxide electrode and two meshes with different wire spacings, showing the meshes’ cylindrical geometry enable them to draw more current per square area. The mesh material composition is analyzed to ensure cycling durability in a CuBi electrolyte by developing a transparent mesh with an inert core (stainless steel, SS), a thin Au coating, and a high charge‐capacity (1.5 C cm−2) CuBi outer coating. The study demonstrates that the films maintain a consistent Cu:Bi ratio and optical properties after 250 privacy cycles or 1500 cycles to 10% transmission, showing that the Cu and Bi coating is effective in keeping the films from becoming Cu rich with cycling. Finally, a 100 cm2device with excellent uniformity and color neutrality is demonstrated. 
    more » « less
  3. ; ; ; ; ; (, Optica Publishing Group)
    We study high-order harmonic generation from epitaxial ZnO films grown on Al2O3substrate. We observe a saturation of the harmonic intensity for a film thickness of 30 nm. 
    more » « less
  4. ; ; (, Advanced Electronic Materials)
    Abstract This work reports important fundamental advancements in multiwall carbon nanotube (MWCNT) rectenna devices by creating and optimizing new diode structures to allow optical rectification with air‐stable devices. The incorporation of double‐insulator layer tunnel diodes, fabricated for the first time on MWCNT arrays, enables the use of air‐stable top metals (Al and Ag) with excellent asymmetry for rectification applications. Asymmetry is increased by as much as 10 times, demonstrating the effectiveness of incorporating multiple dielectric layers to control electron tunneling in MWCNT diode structures. MWCNT tip opening also reduces device resistance up to 75% due to an increase in diode contact area to MWCNT inner walls. This effect is consistent for different oxide materials and thicknesses. A number of insulator layers, including Al2O3, HfO2, TiO2, ZnO, and ZrO2, in both single‐ and then double‐insulator configurations are tested. Resistance increases exponentially with insulator thickness and decreases with electron affinity. These results are used to characterize double‐insulator diode performance. Finally, for the most asymmetric device structure, Al2O3‐HfO2(4/4 nm), optical rectification at a frequency of 470 THz (638 nm) is demonstrated. These results open the door for designing efficient MWCNT rectenna devices with more material flexibility, including air‐stable, transparent, and conductive top electrode materials. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Materials)
    Abstract The emergence of memristive behavior in amorphous–crystalline 2D oxide heterostructures, which are synthesized by atomic layer deposition (ALD) of a few‐nanometer amorphous Al2O3layers onto atomically thin single‐crystalline ZnO nanosheets, is demonstrated. The conduction mechanism is identified based on classic oxygen vacancy conductive channels. ZnO nanosheets provide a 2D host for oxygen vacancies, while the amorphous Al2O3facilitates the generation and stabilization of the oxygen vacancies. The conduction mechanism in the high‐resistance state follows Poole–Frenkel emission, and in the the low‐resistance state is fitted by the Mott–Gurney law. From the slope of the fitting curve, the mobility in the low‐resistance state is estimated to be ≈2400 cm2V−1s−1, which is the highest value reported in semiconductor oxides. When annealed at high temperature to eliminate oxygen vacancies, Al is doped into the ZnO nanosheet, and the memristive behavior disappears, further confirming the oxygen vacancies as being responsible for the memristive behavior. The 2D heterointerface offers opportunities for new design of high‐performance memristor devices. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email