More Like this

1. Tunable frequency combs in nanophotonic parametric oscillators from visible to mid-IR

   https://doi.org/10.1364/BGPPM.2022.JTh4A.7  

   Roy, Arkadev; Ledezma, Luis; Costa, Luis; Gray, Robert; Sekine, Ryoto; Guo, Qiushi; Liu, Mingchen; Briggs, Ryan M.; Marandi, Alireza (July 2022, Optical Devices and Materials for Solar Energy and Solid-state Lighting 2022)

   We demonstrate broadly-tunable synchronously-pumped optical parametric oscillators in nanophotonic lithium niobate. A picosecond 1-µm pump generates subpicosecond signal/idler frequency combs tunable between 1.5 and 3.3µm with up-conversion to the visible on the same chip. 

   more » « less
2. Sheet-based extrusion bioprinting: a new multi-material paradigm providing mid-extrusion micropatterning control for microvascular applications

   https://doi.org/10.1088/1758-5090/ad30c8  

   Hooper, Ryan; Cummings, Caleb; Beck, Anna; Vazquez-Armendariz, Javier; Rodriguez, Ciro; Dean, David (March 2024, Biofabrication)

   Abstract As bioprinting advances into clinical relevance with patient-specific tissue and organ constructs, it must be capable of multi-material fabrication at high resolutions to accurately mimick the complex tissue structures found in the body. One of the most fundamental structures to regenerative medicine is microvasculature. Its continuous hierarchical branching vessel networks bridge surgically manipulatable arteries (∼1–6 mm) to capillary beds (∼10µm). Microvascular perfusion must be established quickly for autologous, allogeneic, or tissue engineered grafts to survive implantation and heal in place. However, traditional syringe-based bioprinting techniques have struggled to produce perfusable constructs with hierarchical branching at the resolution of the arterioles (∼100-10µm) found in microvascular tissues. This study introduces the novel CEVIC bioprinting device (i.e.ContinuouslyExtrudedVariableInternalChanneling), a multi-material technology that breaks the current extrusion-based bioprinting paradigm of pushing cell-laden hydrogels through a nozzle as filaments, instead, in the version explored here, extruding thin, wide cell-laden hydrogel sheets. The CEVIC device adapts the chaotic printing approach to control the width and number of microchannels within the construct as it is extruded (i.e. on-the-fly). Utilizing novel flow valve designs, this strategy can produce continuous gradients varying geometry and materials across the construct and hierarchical branching channels with average widths ranging from 621.5 ± 42.92%µm to 11.67 ± 14.99%µm, respectively, encompassing the resolution range of microvascular vessels. These constructs can also include fugitive/sacrificial ink that vacates to leave demonstrably perfusable channels. In a proof-of-concept experiment, a co-culture of two microvascular cell types, endothelial cells and pericytes, sustained over 90% viability throughout 1 week in microchannels within CEVIC-produced gelatin methacryloyl-sodium alginate hydrogel constructs. These results justify further exploration of generating CEVIC-bioprinted microvasculature, such as pre-culturing and implantation studies. 

   more » « less
3. Spatially resolved measurements of ballistic and total transmission in microscale tissue samples from 450 nm to 1624 nm

   https://doi.org/10.1364/BOE.441844  

   Mok, Aaron_T; Shea, Jamien; Wu, Chunyan; Xia, Fei; Tatarsky, Rose; Yapici, Nilay; Xu, Chris (December 2021, Biomedical Optics Express)

   We built a simple and versatile setup to measure tissue ballistic and total transmission with customizable wavelength range, spatial resolution, and sample sizes. We performed ballistic transmission and total transmission measurements of overlying structures from biological samplesex vivo. We obtained spatially resolved transmission maps to reveal transmission heterogeneity from five microscale tissue samples:Danionellaskin, mouse skull bone, mosquito cuticle, wasp cuticle, and rat dura over a wide spectral range from 450 nm to 1624 nm at a spatial resolution of ∼25µm for ballistic transmission measurements and ∼50µm for total transmission measurements. We expect our method can be straightforwardly applied to measuring the transmission of other samples. The measurement results will be valuable for multiphoton microscopy. The total transmission of a sample is important for the collection of multiphoton excited fluorescence and the assessment of laser-induced sample heating. The ballistic transmission determines the excitation power at the focus and hence the fluorescence signal generation. Therefore, knowledge of ballistic transmission, total transmission, and transmission heterogeneity of overlying structures of animals and organs are essential to determine the optimal excitation wavelength and fluorophores for non-invasive multiphoton microscopy. 

   more » « less
4. A simple analytic model for predicting the wicking velocity in micropillar arrays

   https://doi.org/10.1038/s41598-019-56361-7  

   Krishnan, Siva Rama; Bal, John; Putnam, Shawn A. (December 2019, Scientific Reports)

   Abstract Hemiwicking is the phenomena where a liquid wets a textured surface beyond its intrinsic wetting length due to capillary action and imbibition. In this work, we derive a simple analytical model for hemiwicking in micropillar arrays. The model is based on the combined effects of capillary action dictated by interfacial and intermolecular pressures gradients within the curved liquid meniscus and fluid drag from the pillars at ultra-low Reynolds numbers$${\boldsymbol{(}}{{\bf{10}}}^{{\boldsymbol{-}}{\bf{7}}}{\boldsymbol{\lesssim }}{\bf{Re}}{\boldsymbol{\lesssim }}{{\bf{10}}}^{{\boldsymbol{-}}{\bf{3}}}{\boldsymbol{)}}$$ $\left({10}^{-7}\lesssim \mathrm{Re}\lesssim {10}^{-3}\right)$. Fluid drag is conceptualized via a critical Reynolds number:$${\bf{Re}}{\boldsymbol{=}}\frac{{{\bf{v}}}_{{\bf{0}}}{{\bf{x}}}_{{\bf{0}}}}{{\boldsymbol{\nu }}}$$ $\mathrm{Re}=\frac{v_0{x}_0}{\nu }$, wherev₀corresponds to the maximum wetting speed on a flat, dry surface andx₀is the extension length of the liquid meniscus that drives the bulk fluid toward the adsorbed thin-film region. The model is validated with wicking experiments on different hemiwicking surfaces in conjunction withv₀andx₀measurements using Water$${\boldsymbol{(}}{{\bf{v}}}_{{\bf{0}}}{\boldsymbol{\approx }}{\bf{2}}\,{\bf{m}}{\boldsymbol{/}}{\bf{s}}{\boldsymbol{,}}\,{\bf{25}}\,{\boldsymbol{\mu }}{\bf{m}}{\boldsymbol{\lesssim }}{{\bf{x}}}_{{\bf{0}}}{\boldsymbol{\lesssim }}{\bf{28}}\,{\boldsymbol{\mu }}{\bf{m}}{\boldsymbol{)}}$$ $\left(v_0\approx 2m/s,25\mu m\lesssim x_0\lesssim 28\mu m\right)$, viscous FC-70$${\boldsymbol{(}}{{\boldsymbol{v}}}_{{\bf{0}}}{\boldsymbol{\approx }}{\bf{0.3}}\,{\bf{m}}{\boldsymbol{/}}{\bf{s}}{\boldsymbol{,}}\,{\bf{18.6}}\,{\boldsymbol{\mu }}{\bf{m}}{\boldsymbol{\lesssim }}{{\boldsymbol{x}}}_{{\bf{0}}}{\boldsymbol{\lesssim }}{\bf{38.6}}\,{\boldsymbol{\mu }}{\bf{m}}{\boldsymbol{)}}$$ $\left(v_0\approx 0.3m/s,18.6\mu m\lesssim x_0\lesssim 38.6\mu m\right)$and lower viscosity Ethanol$${\boldsymbol{(}}{{\boldsymbol{v}}}_{{\bf{0}}}{\boldsymbol{\approx }}{\bf{1.2}}\,{\bf{m}}{\boldsymbol{/}}{\bf{s}}{\boldsymbol{,}}\,{\bf{11.8}}\,{\boldsymbol{\mu }}{\bf{m}}{\boldsymbol{\lesssim }}{{\bf{x}}}_{{\bf{0}}}{\boldsymbol{\lesssim }}{\bf{33.3}}\,{\boldsymbol{\mu }}{\bf{m}}{\boldsymbol{)}}$$ $\left(v_0\approx 1.2m/s,11.8\mu m\lesssim x_0\lesssim 33.3\mu m\right)$. 

   more » « less
5. Ultra-Efficient Foundry-Fabricated Resonant Modulators with Thermal Undercut

   https://doi.org/10.1364/CLEO_SI.2023.SF2K.6  

   Rizzo, Anthony; Deenadayalan, Venkatesh; van Niekerk, Matthew; Leake, Gerald; Tison, Christopher; Novick, Asher; Coleman, Daniel; Bergman, Keren; Preble, Stefan; Fanto, Michael (January 2023, Optica Publishing Group)

   We demonstrate highly efficient vertical junction microdisk modulators with selective substrate undercut in a 300 mm CMOS foundry. The devices achieve record thermo-optic efficiency for sub-5µm radius, enabling next-generation low-energy, highly-parallel DWDM links. 

   more » « less