An official website of the United States government
Abstract Dissipative Kerr solitons from optical microresonators, commonly referred to as soliton microcombs, have been developed for a broad range of applications, including precision measurement, optical frequency synthesis, and ultra-stable microwave and millimeter wave generation, all on a chip. An important goal for microcombs is self-referencing, which requires octave-spanning bandwidths to detect and stabilize the comb carrier envelope offset frequency. Further, detection and locking of the comb spacings are often achieved using frequency division by electro-optic modulation. The thin-film lithium niobate photonic platform, with its low loss, strong second- and third-order nonlinearities, as well as large Pockels effect, is ideally suited for these tasks. However, octave-spanning soliton microcombs are challenging to demonstrate on this platform, largely complicated by strong Raman effects hindering reliable fabrication of soliton devices. Here, we demonstrate entirely connected and octave-spanning soliton microcombs on thin-film lithium niobate. With appropriate control over microresonator free spectral range and dissipation spectrum, we show that soliton-inhibiting Raman effects are suppressed, and soliton devices are fabricated with near-unity yield. Our work offers an unambiguous method for soliton generation on strongly Raman-active materials. Further, it anticipates monolithically integrated, self-referenced frequency standards in conjunction with established technologies, such as periodically poled waveguides and electro-optic modulators, on thin-film lithium niobate.
more »
« less
Extreme mechanical tunability in suspended MoS2 resonator controlled by Joule heating
Abstract Nanomechanical resonators are built into phones, as filters or accelerometers, but they lack a knob to effectively tune the frequency at the nanoscale when it’s easy to tune on an octave the tone of a classical musical instrument like a guitar string. Moreover, the control of deformation in nanomaterials, as two-dimensional (2D) materials, to tailor their electronic properties, i.e., straintronic, opens up avenues for applications in force detection, bolometry or quantum emitters. An accurate control of the deformation within these materials is thus necessary to fully exploit their potential. The precise study of deformations in 2D materials involves measurements of vibration modes and nanomechanics. By using a suspended MoS2membrane heated by the Joule effect, we induce a strong softening of the mechanical resonance frequency as a function of the electrothermal heating, over one octave. A simple electrical tension is used to modulate the thermal mechanical tuning. Its amplitude is very large, greater than 100% modulation for one volt, compared to other approaches on 2D or 1D materials and, moreover, a very wide frequency range is accessible. Finally, we have related a photo-induced softening of the membrane over very long times with the current measurements and a photothermal effect.
more »
« less
- Award ID(s):
- 1720530
- PAR ID:
- 10403887
- Publisher / Repository:
- Nature Publishing Group
- Date Published:
- Journal Name:
- npj 2D Materials and Applications
- Volume:
- 7
- Issue:
- 1
- ISSN:
- 2397-7132
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract 2D hybrid organic–inorganic perovskites (HOIPs) are commonly found under subcritical cyclic stresses and suffer from fatigue issues during device operation. However, their fatigue properties remain unknown. Here, the fatigue behavior of (C4H9‐NH3)2(CH3NH3)2Pb3I10, the archetype 2D HOIP, is systematically investigated by atomic force microscopy (AFM). It is found that 2D HOIPs are much more fatigue resilient than polymers and can survive over 1 billion cycles. 2D HOIPs tend to exhibit brittle failure at high mean stress levels, but behave as ductile materials at low mean stress levels. These results suggest the presence of a plastic deformation mechanism in these ionic 2D HOIPs at low mean stress levels, which may contribute to the long fatigue lifetime, but is inhibited at higher mean stresses. The stiffness and strength of 2D HOIPs are gradually weakened under subcritical loading, potentially as a result of stress‐induced defect nucleation and accumulation. The cyclic loading component can further accelerate this process. The fatigue lifetime of 2D HOIPs can be extended by reducing the mean stress, stress amplitude, or increasing the thickness. These results can provide indispensable insights into designing and engineering 2D HOIPs and other hybrid organic–inorganic materials for long‐term mechanical durability.more » « less
-
Abstract Heterogeneous integrations of functionally and chemically distinct materials have been explored to develop promising building blocks for opto‐electronic device applications. Recently, the Van der Waals (vdW)‐assembly of near atom thickness materials has provided excellent opportunities beyond what has been previously been difficult to realize. However, its up‐to‐date demonstrations remain far from achieving the scalability and versatility demanded for practical device applications, that is, the integration is generally demonstrated with intrinsically layered 2D materials of very small lateral dimensions. Herein, the large centimeter‐scale vdW assembly of two different materials with structurally, chemically, and functionally distinct properties, that is, 2D platinum ditelluride (PtTe2) metallic multilayers and non‐layered 3D semiconducting platinum sulfide (PtS) are reported. Both materials are precisely delaminated from their growth wafers inside water and are subsequently integrated on unconventional substrates of desired functionalities. The large‐area vdW‐assembled 2D/3D PtTe2/PtS hetero‐materials on flexible substrates exhibit an excellent photodetection in a spectral range of visible‐to‐near infrared (NIR) wavelength, which is well preserved under severe mechanical deformation. This study paves the way for exploring large‐area flexible opto‐electronic devices solely based on near atom thickness materials.more » « less
-
Abstract The ability to reconfigure spin structure and spin‐photon interactions by an external electric field is a prerequisite for seamless integration of opto‐spintronics into modern electronics. In this study, the use of electric field on the tuning of circular photo galvanic effect in a quasi‐2D oxyhalide perovskite Bi4NbO8Cl is reported. The electrical transport measurements are applied to study the switching characteristics of the microsheet devices. The electric field is used to tune the nanoscale devices and an optical orientation approach is applied to understand the field‐tuned spin‐polarized band structures. It is found that the circular photogalvanic current can be erased and re‐created by poling, indicating the electric‐field‐based control over spin structure. The study enriches the basic understanding of the symmetry‐regulated optoelectronic response in ferroelectrics with spin‐orbit coupling.more » « less
-
Abstract Advancements in low‐dimensional functional device technology heavily rely on the discovery of suitable materials which have interesting physical properties as well as can be exfoliated down to the 2D limit. Exfoliable high‐mobility magnets are one such class of materials that, not due to lack of effort, has been limited to only a handful of options. So far, most of the attention has been focused on the van der Waals (vdW) systems. However, even within the non‐vdW, layered materials, it is possible to find all these desirable features. Using chemical reasoning, it is found that NdSb2is an ideal example. Even with a relatively small interlayer distance, this material can be exfoliated down to few layers. NdSb2has an antiferromagnetic ground state with a quasi 2D spin arrangement. The bulk crystals show a very large, non‐saturating magnetoresistance along with highly anisotropic electronic transport properties. It is confirmed that this anisotropy originates from the 2D Fermi pockets which also imply a rather quasi 2D confinement of the charge carrier density. Both electron and hole‐type carriers show very high mobilities. The possible non‐collinear spin arrangement also results in an anomalous Hall effect.more » « less
