skip to main content


Title: Hyperspectral dark field optical microscopy for orientational imaging of a single plasmonic nanocube using a physics-based learning method
Rotational dynamics at the molecular level could provide additional data regarding protein diffusion and cytoskeleton formation at the cellular level. Due to the isotropic emission pattern of fluorescence molecules, it is challenging to extract rotational information from them during imaging. Metal nanoparticles show a polarization-dependent response and could be used for sensing rotational motion. Nanoparticles as an orientation sensing probe offer bio-compatibility and robustness against photo-blinking and photo-bleaching compared to conventional fluorescent molecules. Previously, asymmetric geometrical structures such as nanorods have been used for orientational imaging. Here, we show orientational imaging of symmetric geometrical structures such as 100 nm isolated silver nanocubes by coupling a hyperspectral detector and a focused ion beam (FIB)-fabricated correlating substrate. More than 100 nanocubes are analyzed to confirm spectral shifts in the scattering spectra due to variations in the orientation of the nanocubes with respect to the incoming light. Results are further validated using finite-difference time-domain simulations. Our observations suggest a novel strategy for high-throughput orientation imaging of nanoparticles.  more » « less
Award ID(s):
2045640
NSF-PAR ID:
10411557
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Nanoscale Advances
Volume:
4
Issue:
19
ISSN:
2516-0230
Page Range / eLocation ID:
4094 to 4101
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Self-assembly of faceted nanoparticles is a promising route for fabricating nanomaterials; however, achieving low-dimensional assemblies of particles with tunable orientations is challenging. Here, we demonstrate that trapping surface-functionalized faceted nanoparticles at fluid–fluid interfaces is a viable approach for controlling particle orientation and facilitating their assembly into unique one- and two-dimensional superstructures. Using molecular dynamics simulations of polymer-grafted nanocubes in a polymer bilayer along with a particle-orientation classification method we developed, we show that the nanocubes can be induced into face-up, edge-up, or vertex-up orientations by tuning the graft density and differences in their miscibility with the two polymer layers. The orientational preference of the nanocubes is found to be governed by an interplay between the interfacial area occluded by the particle, the difference in interactions of the grafts with the two layers, and the stretching and intercalation of grafts at the interface. The resulting orientationally constrained nanocubes are then shown to assemble into a variety of unusual architectures, such as rectilinear strings, close-packed sheets, bilayer ribbons, and perforated sheets, which are difficult to obtain using other assembly methods. Our work thus demonstrates a versatile strategy for assembling freestanding arrays of faceted nanoparticles with possible applications in plasmonics, optics, catalysis, and membranes, where precise control over particle orientation and position is required. 
    more » « less
  2. Surface functionalization of nanoparticles with polymer grafts was recently shown to be a viable strategy for controlling the relative orientation of shaped nanoparticles in their higher-order assemblies. In this study, we investigated in silico the orientational phase behavior of coplanar polymer-grafted nanocubes confined in a thin film. We first used Monte Carlo simulations to compute the two-particle interaction free-energy landscape of the nanocubes and identify their globally stable configurations. The nanocubes were found to exhibit four stable phases: those with edge–edge and face–face orientations, and those exhibiting partially overlapped slanted and parallel faces previously assumed to be metastable. Moreover, the edge–edge configuration originally thought to involve kissing edges instead displayed partly overlapping edges, where the extent of the overlap depends on the attachment positions of the grafts. We next formulated analytical scaling expressions for the free energies of the identified configurations, which were used for constructing a comprehensive phase diagram of nanocube orientation in a multidimensional parameter space comprising of the size and interaction strength of the nanocubes and the Kuhn length and surface density of the grafts. The morphology of the phase diagram was shown to arise from an interplay between polymer- and surface-mediated interactions, especially differences in their scalings with respect to nanocube size and grafting density across the four phases. The phase diagram provided insights into tuning these interactions through the various parameters of the system for achieving target configurations. Overall, this work provides a framework for predicting and engineering interparticle configurations, with possible applications in plasmonic nanocomposites where control over particle orientation is critical. 
    more » « less
  3. Faceted nanoparticles can be used as building blocks to assemble nanomaterials with exceptional optical and catalytic properties. Recent studies have shown that surface functionalization of such nanoparticles with organic molecules, polymer chains, or DNA can be used to control the separation distance and orientation of particles within their assemblies. In this study, we computationally investigate the mechanism of assembly of nanocubes grafted with short-chain molecules. Our approach involves computing the interaction free energy landscape of a pair of such nanocubes via Monte Carlo simulations and using the Dijkstra algorithm to determine the minimum free energy pathway connecting key states in the landscape. We find that the assembly pathway of nanocubes is very rugged involving multiple energy barriers and metastable states. Analysis of nanocube configurations along the pathway reveals that the assembly mechanism is dominated by sliding motion of nanocubes relative to each other punctuated by their local dissociation at grafting points involving lineal separation and rolling motions. The height of energy barriers between metastable states depends on factors such as the interaction strength and surface roughness of the nanocubes and the steric repulsion from the grafts. These results imply that the observed assembly configuration of nanocubes depends not only on their globally stable minimum free energy state but also on the assembly pathway leading to this state. The free energy landscapes and assembly pathways presented in this study along with the proposed guidelines for engineering such pathways should be useful to researchers aiming to achieve uniform nanostructures from self-assembly of faceted nanoparticles. 
    more » « less
  4. Abstract

    Super-resolution imaging based on single molecule localization allows accessing nanometric-scale information in biological samples with high precision. However, complete measurements including molecule orientation are still challenging. Orientation is intrinsically coupled to position in microscopy imaging, and molecular wobbling during the image integration time can bias orientation measurements. Providing 3D molecular orientation and orientational fluctuations would offer new ways to assess the degree of alignment of protein structures, which cannot be monitored by pure localization. Here we demonstrate that by adding polarization control to phase control in the Fourier plane of the imaging path, all parameters can be determined unambiguously from single molecules: 3D spatial position, 3D orientation and wobbling or dithering angle. The method, applied to fluorescent labels attached to single actin filaments, provides precisions within tens of nanometers in position and few degrees in orientation.

     
    more » « less
  5. Plasmonic nanoparticles are excellent nonbleaching probes for bio-imaging. Due to their anisotropic properties, polarization analysis of individual nanoparticles allows for revealing orientational information, plasmon mode assignment, and the local microenvironment. Previous implementations utilize mechanical rotation of conventional polarizers to align the polarization angles with specific axes of nanoparticles. However, the manufacturing defects of the polarizer (e.g., non-parallelism) limit the measurement stability (e.g., beam wobbling) in polarimetric imaging, while the mechanical rotation limits the measurement speed, and thus hinders accurate, real-time acquisition of individual nanoparticles. Here, we demonstrate a high-speed nano-polarimetric system for stable plasmonic bio-imaging by integrating our voltage-tunable polarizer (VTP) into a microscope. The angular rotation of the polarization (0∼π) can be realized by applying voltage on the VTP. We show that our voltage-tunable system offers high extinction ratio (∼up to 250), and uniform transmission (∼55%) over a large input power range (<5% deviation for input power from 50 μW to ∼20 mW). Meanwhile, the transmission polarization can be rapidly tuned with a response time up to 50 ms. Compared to conventional polarizers, our system is able to provide reproducible and high-speed polarimetric images of individual nanoparticles with sub-pixel spatial precision. Such a polarimetric nanoimaging system could be a useful tool for real-time single nanoparticle bio-imaging with both high stability and time resolution. 
    more » « less