An official website of the United States government
Abstract Redox‐active polymers (RAPs) are promising organic electrode materials for affordable and sustainable batteries due to their flexible chemical structures and negligible solubility in the electrolyte. Developing high‐dimensional RAPs with porous structures and crosslinkers can further improve their stability and redox capability by reducing the solubility and enhancing reaction kinetics. This work reports two three‐dimensional (3D) RAPs as stable organic cathodes in Na‐ion batteries (NIBs) and K‐ion batteries (KIBs). Carbonyl functional groups are incorporated into the repeating units of the RAPs by the polycondensation of Tetrakis(4‐aminophenyl)methane and two different dianhydrides. The RAPs with interconnected 3D extended conjugation structures undergo multi‐electron redox reactions and exhibit high performance in both NIBs and KIBs in terms of long cycle life (up to 8000 cycles) and fast charging capability (up to 2 A g−1). The results demonstrate that developing 3D RAPs is an effective strategy to achieve high‐performance, affordable, and sustainable NIBs and KIBs.
more »
« less
Cyclotetrabenzil Derivatives for Electrochemical Lithium‐Ion Storage
Abstract Organic electrode materials could revolutionize batteries because of their high energy densities, the use of Earth‐abundant elements, and structural diversity which allows fine‐tuning of electrochemical properties. However, small organic molecules and intermediates formed during their redox cycling in lithium‐ion batteries (LIBs) have high solubility in organic electrolytes, leading to rapid decay of cycling performance. We report the use of three cyclotetrabenzil octaketone macrocycles as cathode materials for LIBs. The rigid and insoluble naphthalene‐based cyclotetrabenzil reversibly accepts eight electrons in a two‐step process with a specific capacity of 279 mAh g−1and a stable cycling performance with ≈65 % capacity retention after 135 cycles. DFT calculations indicate that its reduction increases both ring strain and ring rigidity, as demonstrated by computed high distortion energies, repulsive regions in NCI plots, and close [C⋅⋅⋅C] contacts between the naphthalenes. This work highlights the importance of shape‐persistency and ring strain in the design of redox‐active macrocycles that maintain very low solubility in various redox states.
more »
« less
- PAR ID:
- 10419221
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Angewandte Chemie International Edition
- Volume:
- 62
- Issue:
- 29
- ISSN:
- 1433-7851
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Lithium‐ion and sodium‐ion batteries (LIBs and SIBs) are crucial in our shift toward sustainable technologies. In this work, the potential of layered boride materials (MoAlB and Mo2AlB2) as novel, high‐performance electrode materials for LIBs and SIBs, is explored. It is discovered that Mo2AlB2shows a higher specific capacity than MoAlB when used as an electrode material for LIBs, with a specific capacity of 593 mAh g−1achieved after 500 cycles at 200 mA g−1. It is also found that surface redox reactions are responsible for Li storage in Mo2AlB2, instead of intercalation or conversion. Moreover, the sodium hydroxide treatment of MoAlB leads to a porous morphology and higher specific capacities exceeding that of pristine MoAlB. When tested in SIBs, Mo2AlB2exhibits a specific capacity of 150 mAh g−1at 20 mA g−1. These findings suggest that layered borides have potential as electrode materials for both LIBs and SIBs, and highlight the importance of surface redox reactions in Li storage mechanisms.more » « less
-
Abstract Aqueous organic redox flow batteries (AORFBs) have received increasing attention as an emergent battery technology for grid‐scale renewable energy storage. However, physicochemical properties of redox‐active organic electrolytes remain fine refinement to maximize their performance in RFBs. Herein, we report a carboxylate functionalized viologen derivative, N,N′‐dibutyrate‐4,4′‐bipyridinium,(CBu)2V, as a highly stable, high capacity anolyte material under near pH neutral conditions.(CBu)2Vcan achieve solubility of 2.1 M and display a reversible, kinetically fast reduction at −0.43 V vs NHE at pH 9. DFT studies revealed that the high solubility of(CBu)2Vis attributed to its high molecular polarity while its negative reduction potential is benefitted from electron‐donating carboxylate groups. A 0.89 V (CBu)2V/(NH)4Fe(CN)6AORFB demonstrated exceptional energy storage performance, specifically, 100 % capacity retention with a discharge energy density of 9.5 Wh L−1for 1000 cycles, power densities of up to 85 mW cm−2, and an energy efficiency of 70 % at 60 mA cm−2.(CBu)2Vnot only represents the most capacity dense viologen with pendant ionic groups and also exhibits the longest (1200 hours or 50 days) and the most stable flow battery performance to date.more » « less
-
Sodium‐on batteries (SIBs) are promising alternatives to lithium‐ion batteries (LIBs) because of the low cost, abundance, and high sustainability of sodium resources. Analogous to LIBs, the high‐capacity electrodes in SIBs always suffer from rapid capacity decay upon long‐term cycling due to the particle pulverization induced by a large volume change. Circumventing particle pulverization plays a critical role in developing high‐energy and long‐life SIBs. Herein, tetrahydroxy‐1,4‐benzoquinone disodium salt (TBDS) that can self‐heal the cracks by hydrogen bonding between hydroxyl group and carbonyl group is employed as a cathode for sustainable and stable SIBs. The self‐healing TBDS exhibits long cycle life of 1000 cycles with a high rate capability up to 2 A g−1due to the fast Na‐ion diffusion reaction in the TBDS cathode. The intermolecular hydrogen bonding has been comprehensively characterized to understand the self‐healing mechanism. The hydrogen bonding‐enabled self‐healing organic materials are promising for developing high‐energy and long‐cycle‐life SIBs.more » « less
-
Abstract Redox flow batteries (RFB) have emerged as one of the most promising technologies for large‐scale energy storage owing to their high safety, long operation life, and decoupled design of energy and power. However, the problems of high cost and low energy density restrict their further development. The cost merit and tunable structure of organic redox‐active materials have prompted the development of organic RFBs. The solubility of the redoxmer is recognized as a parameter that contributes directly to the energy density. Herein, we focus on strategies for enhancing the solubility of organic redoxmers in aqueous RFBs. The effects of incorporating different hydrophilic functional groups on the solubility of the redoxmer and its effect on the performance of other batteries are systematically and exhaustively described. Other strategies, such as molecular symmetry tuning and employing more soluble counterions and cosolvents, are also summarized. The development trends and prospects for organic RFBs are also discussed.more » « less
