skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • On the Changes in Convection-Allowing WRF Forecasts of MCS Evolution due to Decreases in Model Horizontal and Vertical Grid Spacing. Part II: Impacts on QPFs
Title: On the Changes in Convection-Allowing WRF Forecasts of MCS Evolution due to Decreases in Model Horizontal and Vertical Grid Spacing. Part II: Impacts on QPFs
Abstract Several past studies have demonstrated improvement in forecasting convective precipitation by decreasing model grid spacing to the point of explicitly resolving deep convection. Real-case convective modeling studies have attempted to identify what model grid spacing feasibly provides the most optimal forecast given computational constraints. While Part I of this manuscript investigated changes in MCS cold pool characteristics with varied vertical and horizontal grid spacing, Part II explores changes in skill for MCS spatial placement, forward speed, and QPFs among runs with decreased horizontal and vertical grid spacing by employing the same WRF-ARW runs as in Part I. QPF forecast skill significantly improved for later portions of the MCS life cycle when decreasing horizontal grid spacing from 3 to 1 km with the part double-moment Thompson microphysics scheme. Some improvements were present in QPFs with higher precipitation amounts in the early stages of MCSs simulated with the single-moment WSM6 microphysics scheme. However, significant improvements were not common with MCS placement or QPF of the entire precipitation swath with either the Thompson or WSM6 schemes, suggesting that the benefit to MCS QPFs with decreased horizontal grid spacings is limited. Furthermore, increasing vertical resolution from 50 to 100 levels worsened WSM6 scheme QPF skill in some cases, suggesting that choices of or improvement in model physics may be equally or more positively impactful to NWP forecasts than grid spacing changes.  more » « less
Award ID(s):
2022888
PAR ID:
10419512
Author(s) / Creator(s):
;
Date Published:
Journal Name:
Weather and Forecasting
Volume:
37
Issue:
10
ISSN:
0882-8156
Page Range / eLocation ID:
1925 to 1940
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Weather and Forecasting)
    Abstract The degree of improvement in convective representation in NWP with horizontal grid spacings finer than 3 km remains debatable. While some research suggests subkilometer horizontal grid spacing is needed to resolve details of convective structures, other studies have shown that decreasing grid spacing from 3–4 to 1–2 km offers little additional value for forecasts of deep convection. In addition, few studies exist to show how changes in vertical grid spacing impact thunderstorm forecasts, especially when horizontal grid spacing is simultaneously decreased. The present research investigates how warm-season central U.S. simulated MCS cold pools for 11 observed cases are impacted by decreasing horizontal grid spacing from 3 to 1 km, while increasing the vertical levels from 50 to 100 in WRF runs. The 3-km runs with 100 levels produced the deepest and most negatively buoyant cold pools compared to all other grid spacings since updrafts were more poorly resolved, resulting in a higher flux of rearward-advected frozen hydrometeors, whose melting processes were augmented by the finer vertical grid spacing, which better resolved the melting layer. However, the more predominant signal among all 11 cases was for more expansive cold pools in 1-km runs, where the stronger and more abundant updrafts focused along the MCS leading line supported a larger volume of concentrated rearward hydrometeor advection and resultant latent cooling at lower levels. 
    more » « less
  2. ; (, Weather and Forecasting)
    Abstract Ten bow echo events were simulated using the Weather Research and Forecasting (WRF) Model with 3- and 1-km horizontal grid spacing with both the Morrison and Thompson microphysics schemes to determine the impact of refined grid spacing on this often poorly simulated mode of convection. Simulated and observed composite reflectivities were used to classify convective mode. Skill scores were computed to quantify model performance at predicting all modes, and a new bow echo score was created to evaluate specifically the accuracy of bow echo forecasts. The full morphology score for runs using the Thompson scheme was noticeably improved by refined grid spacing, while the skill of Morrison runs did not change appreciably. However, bow echo scores for runs using both schemes improved when grid spacing was refined, with Thompson runs improving most significantly. Additionally, near storm environments were analyzed to understand why the simulated bow echoes changed as grid spacing was changed. A relationship existed between bow echo production and cold pool strength, as well as with the magnitude of microphysical cooling rates. More numerous updrafts were present in 1-km runs, leading to longer intense lines of convection which were more likely to evolve into longer-lived bow echoes in more cases. Large-scale features, such as a low-level jet orientation more perpendicular to the convective line and surface boundaries, often had to be present for bow echoes to occur in the 3-km runs. 
    more » « less
  3. ; (, Monthly Weather Review)
    Abstract Previous research has shown that 3-km horizontal grid spacing simulations depicting clusters of cells often change to showing linear structures when grid spacing is refined to 1 km. This increase in linear structures at finer horizontal grid spacings may be due simply to the resolving of stronger vertical motion along the leading edge of the MCS cold pool resulting in more continuous zones of convection in higher-resolution runs. However, prior work has suggested that the cold pools themselves are stronger with finer grid spacing, enhancing lift to grow linear morphologies faster. In the present study, Cloud Model 1 was used to simulate an array of MCSs with varying wind profiles and a constant thermodynamic profile (Weisman–Klemp analytic sounding) at both 1- and 3-km horizontal grid spacings and with 50 and 100 vertical levels. A line of seven randomly spaced warm bubbles was used to initiate convection. In 1-km Δxsimulations, gravity waves dominated in initiating new convection for growth into lines, and the ascent associated with them was much greater than in 3-km runs. Upscale growth into lines in 3-km Δxsimulations was driven more by ascent caused by the collision of convective cold pools. 
    more » « less
  4. ; (, Weather and Forecasting)
    Abstract A severe derecho impacted the Midwestern United States on 10 August 2020, causing over $12 billion (U.S. dollars) in damage, and producing peak winds estimated at 63 m s−1, with the worst impacts in Iowa. The event was not forecast well by operational forecasters, nor even by operational and quasi-operational convection-allowing models. In the present study, nine simulations are performed using the Limited Area Model version of the Finite-Volume-Cubed-Sphere model (FV3-LAM) with three horizontal grid spacings and two physics suites. In addition, when a prototype of the Rapid Refresh Forecast System (RRFS) physics is used, sensitivity tests are performed to examine the impact of using the Grell–Freitas (GF) convective scheme. Several unusual results are obtained. With both the RRFS (not using GF) and Global Forecast System (GFS) physics suites, simulations using relatively coarse 13- and 25-km horizontal grid spacing do a much better job of showing an organized convective system in Iowa during the daylight hours of 10 August than the 3-km grid spacing runs. In addition, the RRFS run with 25-km grid spacing becomes much worse when the GF convective scheme is used. The 3-km RRFS run that does not use the GF scheme develops spurious nocturnal convection the night before the derecho, removing instability and preventing the derecho from being simulated at all. When GF is used, the spurious storms are removed and an excellent forecast is obtained with an intense bowing echo, exceptionally strong cold pool, and roughly 50 m s−1surface wind gusts. 
    more » « less
  5. ; ; ; ; ; ; ; ; (, Atmospheric Chemistry and Physics)
    Abstract. Secondary ice production (SIP) is an important physicalphenomenon that results in an increase in the ice particle concentration and cantherefore have a significant impact on the evolution of clouds. In thisstudy, idealized simulations of a mesoscale convective system (MCS) wereconducted using a high-resolution (250 m horizontal grid spacing) mesoscalemodel and a detailed bulk microphysics scheme in order to examine theimpacts of SIP on the microphysics and dynamics of a simulated tropical MCS.The simulations were compared to airborne in situ and remote sensing observationscollected during the “High Altitude Ice Crystals – High Ice Water Content”(HAIC-HIWC) field campaign in 2015. It was found that the observed high icenumber concentration can only be simulated by models that include SIPprocesses. The inclusion of SIP processes in the microphysics scheme is crucialfor the production and maintenance of the high ice water content observed intropical convection. It was shown that SIP can enhance the strength of theexisting convective updrafts and result in the initiation of new updraftsabove the melting layer. Agreement between the simulations and observationshighlights the impacts of SIP on the maintenance of tropical MCSs in natureand the importance of including SIP parameterizations in models. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email