skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Incorporation of Novel Graphene Nanosheet Materials as Cathode Catalysts in Li–O2 Battery
Abstract This study reports the superior performance of graphene nanosheet (GNS) materials over Vulcan XC incorporated as a cathode catalyst in Li–O2 battery. The GNSs employed were synthesized from a novel, eco-friendly, and cost-effective technique involving chamber detonation of oxygen (O2) and acetylene (C2H2) precursors. Two GNS catalysts i.e., GNS-1 and GNS-2 fabricated with 0.3 and 0.5 O2/C2H2 precursor molar ratios, respectively, were utilized in this study. Specific surface area (SSA) analysis revealed significantly higher SSA and total pore volume for GNS-1 (180 m2 g−1, 0.505 cm3 g−1) as compared with GNS-2 (19 m2 g−1, 0.041 cm3 g−1). GNS-1 exhibited the highest discharge capacity (4.37 Ah g-1) and superior cycling stability compared with GNS-2 and Vulcan XC. Moreover, GNS-1 demonstrated promising performance at higher current densities (0.2 and 0.3 mA cm−2) and with various organic electrolytes. The superior performance of GNS-1 can be ascribed to its higher mesopore volume, SSA, and optimum wettability compared to its counterparts.  more » « less
Award ID(s):
2329821 1941083
PAR ID:
10421231
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
Journal of Electrochemical Energy Conversion and Storage
Volume:
20
Issue:
2
ISSN:
2381-6872
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Journal of Electrochemical Energy Conversion and Storage)
    Li−O2 batteries with carbon electrodes made from three commercial carbons and carbon made from waste tea leaves are investigated in this study. The waste tea leaves are recycled from household tea leaves and activated using KOH. The carbon materials have various specific surface areas, and porous structures are characterized by the N2 adsorption/desorption. Vulcan XC 72 carbon shows a higher specific surface area (264.1 m2/g) than the acetylene black (76.5 m2/g) and Super P (60.9 m2/g). The activated tea leaves have an extremely high specific surface area of 2868.4 m2/g. First, we find that the commercial carbons achieve similar discharge capacities of ∼2.50 Ah/g at 0.5 mA/cm2. The micropores in carbon materials result in a high specific surface area but cannot help to achieve higher discharge capacity because it cannot accommodate the solid discharge product (Li2O2). Mixing the acetylene black and the Vulcan XC 72 improves the discharge capacity due to the optimized porous structure. The discharge capacity increases by 42% (from 2.73 ± 0.46 to 3.88 ± 0.22 Ah/g) at 0.5 mA/cm2 when the mass fraction of Vulcan XC 72 changes from 0 to 0.3. Second, the electrode made from activated tea leaves is demonstrated for the first time in Li−O2 batteries. Mixtures of activated tea leaves and acetylene black confirm that mixtures of carbon material with different specific surface areas can increase the discharge capacity. Moreover, carbon made from recycled tea leaves can reduce the cost of the electrode, making electrodes more economically achievable. This study practically enhances the discharge capacity of Li−O2 batteries using mixed carbons and provides a method for fabricating carbon electrodes with lower cost and better environmental friendliness. 
    more » « less
  2. ; ; ; (, Fuel Cells)
    Abstract High surface area graphitic mesoporous carbons (M‐mGMC; M=Ni, Fe, Co or Ni‐Fe) were synthesizedviacatalytic graphitization using a hard template based synthesis method. In house prepared SBA‐15 silica material was impregnated with metal precursors to obtain M/SBA‐15, template for M‐mGMC synthesis. These materials were studied using different material characterization techniques, such as nitrogen adsorption desorption (BET), X‐ray diffraction (XRD) analysis, Raman spectroscopy, X‐ray photoelectron spectroscopy (XPS), Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Specific surface area ranging from 1,227.9 m2g−1to 1,320.7 m2g−1was observed for four M‐mGMCs. Raman spectroscopy, XPS and wide angle XRD suggested presence of graphitic structure in these materials along with disorders. Electrocatalytic performance of these materials along with conventional carbon black (Vulcan XC‐72) were evaluated in a single‐stack proton exchange membrane fuel cell (PEMFC). Pt/NiFe‐mGMC exhibited enhanced electrocatalytic activity compared to Pt/Ni‐mGMC, Pt/Fe‐mGMC and Pt/Co‐mGMC electrocatalysts. However, Pt/NiFe‐mGMC lacked adequate proton transport in membrane electrode assembly (MEA) compared to Pt/Vulcan XC‐72. This exploratory study showed that NiFe‐mGMC may find application as electrocatalyst support material in PEMFC. 
    more » « less
  3. ; ; ; (, Macromolecules)
    We report a scalable synthesis of high-molecularweight poly(arylene ether)s (PAEs) using decafluorobiphenyl under SNAr reaction conditions and the preparation of enantiopure (R,R)-6,11-di(tert-butyl)triptycene-1,4-hydroquinone. The nonfluorinated biphenyl-based PAE was also synthesized using Pdcatalyzed C−O coupling methods, and structure−property comparisons were made from the different biphenyl-based polymers. The integration of free-volume-promoting triptycene moieties on the main chain gives rise to intrinsic porosity, which can be further modulated by incorporating biphenyl or perfluorobiphenyl comonomers. The nonfluorinated PAE exhibited a BET surface area of 270 m2 g−1, whereas the racemic and enantiopure fluorinated PAEs showed higher BET surface areas of 454 and 368 m2 g−1, respectively. WAXS analysis revealed that all of the polymers tested have a greater disruption of chain packing compared to related polyimides, with the fluorinated PAEs having the highest average interchain spacing. The fluorinated PAEs also demonstrated high gas permeability as a result of their free volume. The triptycene-based PAEs also were resistant to plasticization even at CO2 pressures of ∼31 bar. 
    more » « less
  4. (, Dryad)
    An improved understanding of the optical properties of secondary organic aerosol (SOA) particles is needed to better predict their climate impacts. Here, SOA was produced by reacting 1-methylnaphthalene or longifolene with hydroxyl radicals (OH) under variable ammonia (NH3), nitrogen oxide (NOx), and relative humidity (RH) conditions. In the presence of NH3 and NOx, longifolene-derived aerosols had relatively high single scattering albedo (SSA) values and low absorption coefficients at 375 nm independent of RH, suggesting that the longifolene SOA is mostly scattering. In 1-methylnaphthalene experiments, the resulting SSA and SOA mass absorption coefficient (MACorg) values suggest the formation of light-absorbing SOA, and the addition of high NOx and high NH3 enhanced the SOA absorption. Under intermediate-NOx dry conditions, the MACorg values increased from 0.13 m2 g−1 in NH3-free conditions to 0.28 m2 g−1 in high-NH3 conditions. Under high-NH3 conditions, the MACorg value further increased to 0.36 m2 g−1 with an increase in RH. Under dry high-NOx conditions, the MACorg value increased from 0.42 to 0.67 m2 g−1 with the addition of NH3, while with elevated RH, the MACorg value reached 0.70 m2 g−1. The time series of MACorg showed increasing trends only in the presence of NH3. Composition analysis of SOA suggests that organonitrates, nitroorganics, and other nitrogen-containing organic compounds (NOCs) are potential chromophores in the 1-methylnaphthalene SOA. Significant formation of NOCs was observed in the presence of high-NOx and NH3 and was enhanced under elevated RH. The data have been collected in an environmental chamber, oxidizing 30-100 ppbv of 1-methylnaphthalene and 70-100 ppbv of longifolene under different levels of nitrogen oxides, ammonia, and relative humidity. Microphysical properties (size distribution and absorption and scattering coefficients) of SOA along with its composition were monitored throughout the experiment. Submitted data include the time series of the calculated mass absorption coefficient and single scattering albedo at 375 nm, derived real and imaginary components of the refractive index, organic nitrate to organic ratio, and organic and nitrate mass concentrations. The data have been analyzed using Wavemetrics Igor Pro, specifically the software written specifically to analyze the data obtained from Aerodyne's aerosol mass spectrometers (i.e., Squirrel and Pika). Other calculations were also carried out in Igor Pro. More details are provided in the related manuscripts. Please see README file. 
    more » « less
  5. ; ; ; ; ; ; ; ; (, Environmental Science & Technology)
    Hydrogen peroxide (H2O2) is a green oxidant widely used in water treatment and sustainable chemistry. Although many advanced materials exist for photo- and electrocatalytic production, H2O2 output and stability depend on reactor design and water quality. This study explores a scalable photochemical system employing bismuth vanadate-coated polymeric optical fibers (POF-BVO) illuminated by 440 nm LEDs. A single 20 cm, 3 mm diameter fiber generates H2O2 at 4.3 mg H2O2 h−1 (430 mg H2O2 gcat −1 h−1), with enhanced rates achieved using bundled fibers. The bundled configuration increases fiber packing density in the reactor to >120 m2 m−3, tripling that of flat-plate photocatalytic reactors. High H2O2 production is achieved using oxygen-permeable hollowfiber membranes to deliver pure O2 or air. The system performs consistently across pH 4−9 and in tap water, wastewater, or seawater. Phosphate ions improve H2O2 stability, resulting in higher concentrations. Over 21 days of continuous operation, the system produces >6 g L−1 of H2O2 with minimal performance degradation. Energy analysis reveals a 2−30x reduction in energy use compared to traditional slurry-based photocatalytic systems, with a three-fiber bundle reaching 27 kWh kg−1 comparable to electrochemical processes. These results demonstrate the potential of the POF-BVO platform as an energy-efficient and modular solution for decentralized H2O2 production. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email