skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: International Monitoring System infrasound data products for atmospheric studies and civilian applications
Abstract. The International Monitoring System (IMS) was established in the late 1990sfor verification of the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Uponcompletion, 60 infrasound stations distributed over the globe will monitorthe Earth's atmosphere for low-frequency pressure waves. In this study, wepresent advanced infrasound data products of the 53 currently certified IMSinfrasound stations for atmospheric studies and civilian applications. Forthis purpose, 18 years of raw IMS infrasound waveform data (2003–2020) were reprocessed using the Progressive Multi-Channel Correlation (PMCC) method. A one-third octave frequency band configuration between 0.01 and 4 Hz was chosen to run this array-processing algorithm which detects coherent infrasound waves within the background noise. From the comprehensive detection lists, four products were derived for each of the certified 53 IMS infrasound stations. The four products cover different frequency ranges and are provided at the following different temporal resolutions: a very low-frequency set (0.02–0.07 Hz, 30 min; https://doi.org/10.25928/bgrseis_bblf-ifsd, Hupe et al., 2021a), two so-called microbarom frequency sets – covering both the lower (0.15–0.35 Hz, 15 min; https://doi.org/10.25928/bgrseis_mblf-ifsd, Hupe et al., 2021b) and a higher (0.45–0.65 Hz, 15 min; https://doi.org/10.25928/bgrseis_mbhf-ifsd, Hupe et al., 2021c) part – named after the dominant ambient noise of interacting ocean waves that are quasi-continuously detected at IMS stations, and observations with center frequencies of 1 to 3 Hz (5 min), called the high-frequency product (https://doi.org/10.25928/bgrseis_bbhf-ifsd, Hupe et al., 2021d). Within these frequency ranges and time windows, the dominant repetitive signal directions are summarized. Along with several detection parameters, calculated quantities for assessing the relative quality of the products are provided. The validity of the data products is demonstrated through example case studies of recent events that produced infrasound detected at IMS infrasound stations and through a global assessment and summary of the products. The four infrasound data products cover globally repeating infrasound sources such as ocean ambient noise or persistently active volcanoes, which have previously been suggested as sources for probing the winds in the middle atmosphere. Therefore, our infrasound data products open up the IMS observations also to user groups who do not have unconstrained access to IMS data or who are unfamiliar with infrasound data processing using the PMCC method. These types of data products could potentially serve as a basis for volcanic eruption early warning systems in the future.  more » « less
Award ID(s):
1847736
PAR ID:
10422343
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
Earth System Science Data
Volume:
14
Issue:
9
ISSN:
1866-3516
Page Range / eLocation ID:
4201 to 4230
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Earth and Space Science)
    Abstract The International Monitoring System (IMS) infrasound network has been established to detect nuclear explosions and other signals of interest embedded in the station‐specific ambient noise. The ambient noise can be separated into coherent infrasound (e.g., real infrasonic signals) and incoherent noise (such as that caused by wind turbulence). Previous work statistically and systematically characterized coherent infrasound recorded by the IMS. This paper expands on this analysis of the coherent ambient infrasound by including updated IMS data sets with data up to the end of 2020 for all 53 of the currently certified IMS infrasound stations using an updated configuration of the Progressive Multi‐Channel Correlation (PMCC) method. This paper presents monthly station‐dependent reference curves for the back azimuth, trace velocity, and root mean squared amplitude, which provides a means to determine the deviation from the nominal monthly behavior. In addition, a daily Ambient Noise Stationarity (ANS) factor based on deviations from the reference curves is determined for a quick reference to the coherent signal quality compared to the nominal situations. Newly presented histograms provide a higher resolution spectrum, including the observations of the microbarom peak, as well as additional peaks reflecting station‐dependent environmental noise. The aim of these reference curves is to identify periods of suboptimal operation (e.g., nonoperational sensor) or instances of strong abnormal signals of interest. 
    more » « less
  2. ; (, Geophysical Research Letters)
    Abstract Liu et al. (2022,https://doi.org/10.1029/2021GL093691) used Rayleigh waves extracted from the cross‐correlation of ambient noise recorded by two stations to monitor the seismic velocity variations associated with the 2018 Kı̄lauea eruption. However, their study ignored the fact that the tremors on the Island of Hawai'i were dominated by a source at the Kı̄lauea summit before the eruption. Close inspection of the waveforms of the station pair PAUD‐STCD shows a simple, mistakenly identified wave traveling direction in Liu et al. (2022,https://doi.org/10.1029/2021GL093691). A correct wave traveling direction agrees with the noise source model, where the dominant tremor source should be at the Kı̄lauea summit. Because of the drastic change in the tremor source after the eruption, the cross‐correlation of the tremor records may reflect predominantly changes in the source rather than in the medium properties between the two stations. 
    more » « less
  3. ; ; ; ; ; (, Journal of Geophysical Research: Solid Earth)
    Abstract Seismic and infrasound multistation ambient‐noise interferometry has been widely used to infer ground and atmospheric properties, and single‐station and autocorrelation seismic interferometry has also shown potential for characterizing Earth structure at multiple scales. We extend autocorrelation seismic interferometry to ambient atmospheric infrasound recordings that contain persistent local noise from waterfalls and rivers. Across a range of geographic settings, we retrieve relative sound‐speed changes that exhibit clear diurnal oscillations consistent with temperature and wind variations. We estimate ambient air temperatures from variations in relative sound speeds. The frequency band from 1 to 2 Hz appears most suitable to retrieve weather parameters as nearby waterfalls and rivers may act as continuous and vigorous sources of infrasound that help achieve convergence of coherent phases in the autocorrelation codas. This frequency band is also appropriate for local sound‐speed variations because it has infrasound with wavelengths of ∼170–340 m, corresponding to a typical atmospheric boundary layer height. After applying array analysis to autocorrelation functions derived from a three‐element infrasound array, we find that autocorrelation codas are composed of waves reflected off nearby topographic features, such as caldera walls. Lastly, we demonstrate that autocorrelation infrasound interferometry offers the potential to study the atmosphere over at least several months and with a fine time resolution. 
    more » « less
  4. ; ; ; ; ; (, Seismological Research Letters)
    Abstract Popocatépetl is a highly active stratovolcano in central Mexico with recurrent activity of Vulcanian-type explosions and frequent degassing. The proximity of Popocatépetl volcano to Mexico City, one of the most populated cities in the world, demands continuous monitoring to achieve an adequate volcano risk assessment. We present an overview of the first high-dynamic-range and high-broadband (0.01–200 Hz; 400 Hz sampling rate) seismoacoustic network (PoPiNet), which we operated around Popocatépetl volcano from August 2021 to May 2022. Here, we show preliminary results of the explosions recorded in September 2021. We deployed five seismoacoustic stations within 4–25 km horizontal distance (range) from the vent. We identify infrasonic waveforms associated with tremor and explosions, with pressures ranging from 16 to 134 Pa and dominant frequencies between 0.2 and 5.0 Hz. The frequency content of the recorded signals at the closest stations to the volcano spans the sub-bass (20–60 Hz) and bass (60–250 Hz) ranges. The associated seismic signals of moderate explosions exhibit air-to-ground coupled waves with maximum coherence values at frequencies up to 5 and 25 Hz for the farthest and closest stations to the volcano, respectively. Conversely, we observe infrasound signal amplitudes from relatively small explosions reaching maximum pressures of 10 Pa that do not couple into the ground, even at the closest stations. These infrasound signals are associated with type-I long-period events as reported in previous investigations. The waveform consistency suggests repetitive and nondestructive sources beneath the volcano. 
    more » « less
  5. ; ; (, Bulletin of the Seismological Society of America)
    ABSTRACT Earthquakes generate infrasound in multiple ways. Acoustic coupling at the surface from vertical seismic velocity, termed local infrasound, is often recorded by infrasound sensors but has seen relatively little study. Over 140 infrasound stations have recently been deployed in Alaska. Most of these stations have single sensors, rather than arrays, and were originally installed as part of the EarthScope Transportable Array. The single sensor nature, paucity of ground-truth signals, and remoteness makes evaluating their data quality and utility challenging. In addition, despite notable recent advances, infrasound calibration and frequency response evaluation remains challenging, particularly for large networks and retrospective analysis of sensors already installed. Here, we examine local seismoacoustic coupling on colocated seismic and infrasound stations in Alaska. Numerous large earthquakes across the region in recent years generated considerable vertical seismic velocity and local infrasound that were recorded on colocated sensors. We build on previous work and evaluate the full infrasound station frequency response using seismoacoustic coupled waves. By employing targeted signal processing techniques, we show that a single seismometer may be sufficient for characterizing the response of an entire nearby infrasound array. We find that good low frequency (<1 Hz) infrasound station response estimates can be derived from large (Mw>7) earthquakes out to at least 1500 km. High infrasound noise levels at some stations and seismic-wave energy focused at low frequencies limit our response estimates. The response of multiple stations in Alaska is found to differ considerably from their metadata and are related to improper installation and erroneous metadata. Our method provides a robust way to remotely examine infrasound station frequency response and examine seismoacoustic coupling, which is being increasingly used in airborne infrasound observations, earthquake magnitude estimation, and other applications. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email