Water‐responsive (WR) materials that strongly swell and shrink in response to changes in relative humidity (RH) have shown a great potential to serve as high‐energy actuators for soft robotics and new energy‐harvesting systems. However, the design criteria governing the scalable and high‐efficiency WR actuation remain unclear, and thus inhibit further development of WR materials for practical applications. Nature has provided excellent examples of WR materials that contain stiff nanocrystalline structures that can be crucial to understand the fundamentals of WR behavior. This work reports that regenerated
- Award ID(s):
- 2112550
- PAR ID:
- 10422709
- Date Published:
- Journal Name:
- Soft Matter
- Volume:
- 19
- Issue:
- 11
- ISSN:
- 1744-683X
- Page Range / eLocation ID:
- 2047 to 2052
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract Bombyx (B.) mori silk can be processed to increase β‐sheet crystallinity, which dramatically increases the WR energy density to 1.6 MJ m−3, surpassing that of all known natural muscles, including mammalian muscles and insect muscles. Interestingly, the maximum water sorption decreases from 80.4% to 19.2% as the silk's β‐sheet crystallinity increases from 19.7% to 57.6%, but the silk's WR energy density shows an eightfold increase with higher fractions of β‐sheets. The findings of this study suggest that high crystallinity of silk reduces energy dissipation and translates the chemical potential of water‐induced pressure to external loads more efficiently during the hydration/dehydration processes. Moreover, the availability ofB. mori silk opens up possibilities for simple and scalable modification and production of powerful WR actuators. -
more » « less
Abstract Silk‐elastin‐like‐protein polymers (SELPs) are genetically engineered recombinant protein sequences consisting of repeating units of silk‐like and elastin‐like blocks. By combining these entities, it is shown that both the characteristic strength of silk and the temperature‐dependent responsiveness of elastin can be leveraged to create an enhanced stimuli‐responsive material. It is hypothesized that SELP behavior can be influenced by varying the silk‐to‐elastin ratio. If the responsiveness of the material at different ratios is significantly different, this would allow for the design of materials with specific temperature‐based swelling and mechanical properties. This study demonstrates that SELP fiber properties can be controlled via a temperature transition dependent on the ratio of silk‐to‐elastin in the material. SELP fibers are experimentally wet spun from polymers with different ratios of silk‐to‐elastin and conditioned in either a below or above transition temperature (
T t) water bath prior to characterization. The fibers with higher elastin content showed more stimuli‐responsive behavior compared to the fibers with lower elastin content in the hot (57–60 °C) versus cold (4–7 °C) environment, both computationally and experimentally. This work builds a foundation for developing SELP materials with well‐characterized mechanical properties and responsive features. -
more » « less
Abstract Biological water-responsive materials that deform with changes in relative humidity have recently demonstrated record-high actuation energy densities, showing promise as high-performance actuators for various engineering applications. However, there is a lack of theories capable of explaining or predicting the stress generated during water-responsiveness. Here, we show that the nanoscale confinement of water dominates the macroscopic dehydration-induced stress of the regenerated silk fibroin. We modified silk fibroin’s secondary structure, which leads to various distributions of bulk-like mobile and tightly bound water populations. Interestingly, despite these structure variations, all silk samples start to exert force when the bound-to-mobile (B/M) ratio of confined water reaches the same level. This critical B/M water ratio suggests a common threshold above which the chemical potential of water instigates the actuation. Our findings serve as guidelines for predicting and engineering silk’s WR behavior and suggest the potential of describing the WR behavior of biopolymers through confined water.
-
Silk fibers are produced by a wide variety of insects. The silkworm Bombyx mori (Bombyx) was domesticated because the physical properties of its silk fibers were amenable to the production of fine textiles. Subsequently, engineers have regenerated silk fibroin to form biomaterials. The monocular focus on Bombyx silk has underutilized the expanse of diverse silk proteins produced by more than 100,000 other arthropods. This vast array of silk fibers could be utilized for biomedical engineering challenges if sufficient rearing and purification processes are developed. Herein, we show that the moth, Plodia interpunctella (Plodia), represents an alternative silk source that is easily reared in highly regulated culture environments allowing for greater consistency in the silk produced. We controlled the temperature, resource availability (larvae/gram diet), and population density (larvae/mL) with the goal of increasing silk fiber production and improving homogeneity in Plodia silk proteins. We determined that higher temperatures accelerated insect growth and reduced life cycle length. Furthermore, we established initial protocols for the production of Plodia silk with optimal silk production occurring at 24 °C, with a resource availability of 10 larvae/gram and a population density of 0.72 larvae/mL. Population density was shown to be the most prominent driving force of Plodia silk mat formation among the three parameters assessed. Future work will need to link gene expression, protein production and purification, and resulting mechanical properties as a function of environmental cues to further transition Plodia silk into regenerated silk fibroin biomaterials.more » « less
-
more » « less
Abstract Silk fibroin protein is a biomaterial with excellent biocompatibility and low immunogenicity. These properties have catapulted the material as a leader for extensive use in stents, catheters, and wound dressings. Modulation of hydrophobicity of silk fibroin protein to further expand the scope and utility however has been elusive. We report that installing perfluorocarbon chains on the surface of silk fibroin transforms this water‐soluble protein into a remarkably hydrophobic polymer that can be solvent‐cast. A clear relationship emerged between fluorine content of the modified silk and film hydrophobicity. Water contact angles of the most decorated silk fibroin protein exceeded that of Teflon®. We further show that water uptake in prefabricated silk bars is dramatically reduced, extending their lifetimes, and maintaining mechanical integrity. These results highlight the power of chemistry under moderate conditions to install unnatural groups onto the silk fibroin surface and will enable further exploration into applications of this versatile biomaterial.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D2SM01601J
