skip to main content

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: High accurate and efficient electrical impedance tomography for fast brain imaging
Electrical Impedance Tomography (EIT) is a medical imaging technique that reconstructs impedance distribution inside a target object by injecting electrical currents into pairs of electrodes and measuring induced voltages on the remaining electrodes. Since neural signals result from the activity of ion channels causing impedance changes in the cell membrane, EIT can image these neural activities for understanding brain function and medical purposes. In our research, our self-developed electronic prototype board was used to generate high-quality electrical current and collect the data on electrodes with a high sampling rate and bit-resolution. In image reconstruction, a preprocessing data analysis algorithm was newly developed and applied to improve the accuracy of our EIT imaging. The human head has complex anatomical geometry and non-uniform resistivity distribution along with the highly resistive skull, which makes brain-EIT remains challenging inaccurate image reconstruction. To mimic the human head, a multi-layered human head phantom was designed and tested to investigate the effect of the skull structure on imaging. In this presentation, comparison studies for measurements and simulation results will be introduced to discuss the source of errors and improve the accuracy and efficiency of our brain-EIT system.  more » « less
Award ID(s):
2112595
PAR ID:
10422739
Author(s) / Creator(s):
; ; ;
Editor(s):
Kim, Jaehwan; Oh, Ilkwon; Yoon, Hargsoon; Porfiri, Maurizio
Date Published:
Journal Name:
Nano-, Bio-, Info-Tech Sensors, and Wearable Systems 2023
Volume:
12485
Page Range / eLocation ID:
8
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ( , SPIE)
    Kim, Jaehwan (Ed.)
    Electrical impedance tomography (EIT) is a rising and emerging imaging technique with great potential in many areas, especially in functional brain imaging applications. An EIT system with high speed and accuracy can have many applications to medical devices supporting in diagnosis and treatment of neurological disorders and diseases. In this research, EIT algorithms and hardware are developed and improved to increase reconstructed images' accuracy and decrease the reconstruction time. Due to multiplexer design limitations, EIT measurements are subject to strong capacitive effects from charging and discharging in switching cycles around 300 to 400 samples per 1280 samples (in 10 milliseconds sampling). We developed an algorithm to choose data in steady-state condition only selectively. This method improves the signal-to-noise ratio and results in better reconstruction images. An algorithm to effectively synchronize the beginning points of data was developed to increase the system's speed. This presentation also presents the EIT system's hardware architecture based on Texas Instruments Fixed-Point Digital Signal Processor - TMS320VC5509A, which is low-cost, high potential in popularity the community in the future. For high operation speed, we propose the EIT system used Sitara™ AM57x processors of Texas Instruments. 
    more » « less
  2. ; ; ; ( , ESAIM: Mathematical Modelling and Numerical Analysis)
    Electrical Impedance Tomography (EIT) is a well-known imaging technique for detecting the electrical properties of an object in order to detect anomalies, such as conductive or resistive targets. More specifically, EIT has many applications in medical imaging for the detection and location of bodily tumors since it is an affordable and non-invasive method, which aims to recover the internal conductivity of a body using voltage measurements resulting from applying low frequency current at electrodes placed at its surface. Mathematically, the reconstruction of the internal conductivity is a severely ill-posed inverse problem and yields a poor quality image reconstruction. To remedy this difficulty, at least in part, we regularize and solve the nonlinear minimization problem by the aid of a Krylov subspace-type method for the linear sub problem during each iteration. In EIT, a tumor or general anomaly can be modeled as a piecewise constant perturbation of a smooth background, hence, we solve the regularized problem on a subspace of relatively small dimension by the Flexible Golub-Kahan process that provides solutions that have sparse representation. For comparison, we use a well-known modified Gauss–Newton algorithm as a benchmark. Using simulations, we demonstrate the effectiveness of the proposed method. The obtained reconstructions indicate that the Krylov subspace method is better adapted to solve the ill-posed EIT problem and results in higher resolution images and faster convergence compared to reconstructions using the modified Gauss–Newton algorithm. 
    more » « less
  3. ; ; ; ( , Journal of Anatomy)
    Abstract

    Traumatic brain injury (TBI) is a common injury modality affecting a diverse patient population. Axonal injury occurs when the brain experiences excessive deformation as a result of head impact. Previous studies have shown that the arachnoid trabeculae (AT) in the subarachnoid space significantly influence the magnitude and distribution of brain deformation during impact. However, the quantity and spatial distribution of cranial AT in humans is unknown. Quantification of these microstructural features will improve understanding of force transfer during TBI, and may be a valuable dataset for microneurosurgical procedures. In this study, we quantify the spatial distribution of cranial AT in seven post‐mortem human subjects. Optical coherence tomography (OCT) was used to conduct in situ imaging of AT microstructure across the surface of the human brain. OCT images were segmented to quantify the relative amounts of trabecular structures through a volume fraction (VF) measurement. The average VF for each brain ranged from 22.0% to 29.2%. Across all brains, there was a positive spatial correlation, with VF significantly greater by 12% near the superior aspect of the brain (p < .005), and significantly greater by 5%−10% in the frontal lobes (p < .005). These findings suggest that the distribution of AT between the brain and skull is heterogeneous, region‐dependent, and likely contributes to brain deformation patterns. This study is the first to image and quantify human AT across the cerebrum and identify region‐dependencies. Incorporation of this spatial heterogeneity may improve the accuracy of computational models of human TBI and enhance understanding of brain dynamics.

     
    more » « less
  4. ; ; ; ; ( , Journal of Computational Physics)
    A path integral Monte Carlo method (PIMC) based on a Feynman-Kac formula for the Laplace equation with mixed boundary conditions is proposed to solve the forward problem of the electrical impedance tomography (EIT). The forward problem is an important part of iterative algorithms of the inverse EIT problem, and the proposed PIMC provides a local solution to find the potentials and currents on individual electrodes. Improved techniques are proposed to compute with better accuracy both the local time of reflecting Brownian motions (RBMs) and the Feynman-Kac formula for mixed boundary problems of the Laplace equation. Accurate voltage-to-current maps on the electrodes of a model 3-D EIT problem with eight electrodes are obtained by solving a mixed boundary problem with the proposed PIMC method. 
    more » « less
  5. ; ( , Inverse Problems)
    Abstract

    Photoacoustic computed tomography (PACT) is an emerging computed imaging modality that exploits optical contrast and ultrasonic detection principles to form images of the photoacoustically induced initial pressure distribution within tissue. The PACT reconstruction problem corresponds to a time-domain inverse source problem, where the initial pressure distribution is recovered from the measurements recorded on an aperture outside the support of the source. A major challenge in transcranial PACT brain imaging is to compensate for aberrations in the measured acoustic data that are induced by propagation of the photoacoustic wavefields through the skull. To properly account for these effects, previously proposed image reconstruction methods for transcranial PACT require knowledge of the spatial distribution of the elastic parameters of the skull. However, estimating the spatial distribution of these parameters prior to the PACT experiment remains challenging. To circumvent this issue, in this work a method to jointly reconstruct the initial pressure distribution and a low-dimensional representation of the elastic parameters of the skull is developed and investigated. The joint reconstruction (JR) problem is solved by use of a proximal optimization method that allows constraints and non-smooth regularization terms. The proposed method is evaluated by use of large-scale three-dimensional (3D) computer-simulation studies that mimic transcranial PACT experiments.

     
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email