More Like this

1. Functionalization of Water-Soluble Metallopolymer Electrocatalysts for Water-Splitting Using Atom Transfer Radical Polymerization and Click Chemistry

   https://doi.org/10.1021/acsmacrolett.5c00138  

   Gibson, Arthur C; Glass, Richard S; Lichtenberger, Dennis L; Pyun, Jeffrey (May 2025, ACS Macro Letters)

   Rowan, Stuart J (Ed.)

   ABSTRACT: The diverse functionalization of the polymeric support phase of diiron disulfide[2Fe–2S] metallopolymer elec-trocatalysts offers a route to enhanced generation of molecular hydrogen production via water-splitting. Click chemistry has been shown to be a useful tool in post-polymerization functionalization for a wide range of polymeric materials under mild conditions which is a requirement for [2Fe-2S] metallopolymers due to the presence of iron carbonyl (Fe-CO) bonds in the active site. In this study, we developed a new synthetic methodology to functionalize [2Fe–2S] metallopolymers using atom transfer radical polymerization (ATRP) and post-polymerization functionalization using azide-alkyne “click” cycloaddition. Azide functional [2Fe–2S] metallopolymers were prepared by the ATRP of 3-azidopropyl methacrylate (AzPMA) with either methyl methacrylate (MMA), or 2-(dimethylamino)ethyl methacrylate (DMAEMA), followed by copper-catalyzed “click” cycloaddition with functional terminal alkynes. Both families of PMMA and PDMAEMA functional [2Fe–2S] metallo-co-polymers were found to be retain Fe-CO bonds from the catalyst active site after the click chemistry reactions, and more importantly, exhibited high electrocatalytic activity for electrochemical water-splitting under pH neutral aqueous conditions.Not Available 

   more » « less
2. Biotin-Conjugated Cellulose Nanofibers Prepared via Copper-Catalyzed Alkyne-Azide Cycloaddition (CuAAC) “Click” Chemistry

   https://doi.org/10.3390/nano10061172  

   Goodge, Katarina; Frey, Margaret (June 2020, Nanomaterials)

   null (Ed.)

   As potential high surface area for selective capture in diagnostic or filtration devices, biotin-cellulose nanofiber membranes were fabricated to demonstrate the potential for specific and bio-orthogonal attachment of biomolecules onto nanofiber surfaces. Cellulose acetate was electrospun and substituted with alkyne groups in either a one- or two-step process. The alkyne reaction, confirmed by FTIR and Raman spectroscopy, was dependent on solvent ratio, time, and temperature. The two-step process maximized alkyne substitution in 10/90 volume per volume ratio (v/v) water to isopropanol at 50 °C after 6 h compared to the one-step process in 80/20 (v/v) at 50 °C after 48 h. Azide-biotin conjugate “clicked” with the alkyne-cellulose via copper-catalyzed alkyne-azide cycloaddition (CuAAC). The biotin-cellulose membranes, characterized by FTIR, SEM, Energy Dispersive X-ray spectroscopy (EDX), and XPS, were used in proof-of-concept assays (HABA (4′-hydroxyazobenzene-2-carboxylic acid) colorimetric assay and fluorescently tagged streptavidin assay) where streptavidin selectively bound to the pendant biotin. The click reaction was specific to alkyne-azide coupling and dependent on pH, ratio of ascorbic acid to copper sulfate, and time. Copper (II) reduction to copper (I) was successful without ascorbic acid, increasing the viability of the click conjugation with biomolecules. The surface-available biotin was dependent on storage medium and time: Decreasing with immersion in water and increasing with storage in air. 

   more » « less
3. Functional sugar-based polymers and nanostructures comprised of degradable poly( d -glucose carbonate)s

   https://doi.org/10.1039/C6PY01978A  

   Su, Lu; Khan, Sarosh; Fan, Jingwei; Lin, Yen-Nan; Wang, Hai; Gustafson, Tiffany P.; Zhang, Fuwu; Wooley, Karen L. (January 2017, Polymer Chemistry)

   Fundamental synthetic methodology was advanced to allow for the preparation of a reactive glucose-based block copolycarbonate, which was conveniently transformed into a series of amphiphilic block copolymers that underwent aqueous assembly into functional nanoparticle morphologies having practical utility in biomedical and other applications. Two degradable d -glucose carbonate monomers, with one carrying alkyne functionality, were designed and synthesized to access well-defined block polycarbonates ( Đ < 1.1) via sequential organocatalytic ring opening polymerizations (ROPs). Kinetic studies of the organocatalyzed sequential ROPs showed a linear relationship between the monomer conversion and the polymer molecular weight, which indicated the controlled fashion during each polymerization. The pendant alkyne groups underwent two classic click reactions, copper-catalyzed azide–alkyne dipolar cycloaddition (CuAAC) and thiol–yne addition reactions, which were employed to render hydrophilicity for the alkyne-containing block and to provide a variety of amphiphilic diblock poly( d -glucose carbonate)s (PGCs). The resulting amphiphilic PGCs were further assembled into a family of nanostructures with different sizes, morphologies, surface charges and functionalities. These non-ionic and anionic nanoparticles showed low cytotoxicity in RAW 264.7 mouse macrophage cells and MC3T3 healthy mouse osteoblast precursor cells, while the cationic nanoparticles exhibited significantly higher IC 50 (162 μg mL −1 in RAW 264.7; 199 μg mL −1 in MC3T3) compared to the commercially available cationic lipid-based formulation, Lipofectamine (IC 50 = 31 μg mL −1 ), making these nanomaterials of interest for biomedical applications. 

   more » « less
4. SNAP-tagging live cells via chelation-assisted copper-catalyzed azide–alkyne cycloaddition

   https://doi.org/10.1039/D3OB01003A  

   Stone, Daniel J; Macias-Contreras, Miguel; Crist, Shaun M; Bucag, Christelle_F T; Seo, Gwimoon; Zhu, Lei (September 2023, Organic & Biomolecular Chemistry)

   The sequential biochemical (SNAP-tag) and chemical (chelation-assisted copper-catalyzed azide–alkyne cycloaddition) reactions are applied in membrane protein labeling on live cells. The second, chemical step is rapid (within 1 minute) without any ill-effect to the labeled cells. 

   more » « less
5. New 1,2,3-Triazoles from (R)-Carvone: Synthesis, DFT Mechanistic Study and In Vitro Cytotoxic Evaluation

   https://doi.org/10.3390/molecules27030769  

   Oubella, Ali; Bimoussa, Abdoullah; N’ait Oussidi, Abdellah; Fawzi, Mourad; Auhmani, Aziz; Morjani, Hamid; Riahi, Abdelkhalek; Esseffar, M’hamed; Parish, Carol; Ait Itto, Moulay Youssef (February 2022, Molecules)

   Aseries of novel 1,4-disubstituted 1,2,3-triazoles were synthesized from an (R)-carvone terminal alkyne derivative via a Cu (I)-catalyzed azide–alkyne cycloaddition reaction using CuSO4,5H2O as the copper (II) source and sodium ascorbate as a reducing agent which reduces Cu (II) into Cu (I). All the newly synthesized 1,2,3-triazoles 9a–h were fully identified on the basis of their HRMS and NMR spectral data and then evaluated for their cell growth inhibition potential by MTS assay against HT-1080 fibrosarcoma, A-549 lung carcinoma, and two breast adenocarcinoma (MCF-7 and MDA-MB-231) cell lines. Compound 9d showed notable cytotoxic effects against the HT-1080 and MCF-7 cells with IC50 values of 25.77 and 27.89 µM, respectively, while compound 9c displayed significant activity against MCF-7 cells with an IC50 value of 25.03 µM. Density functional calculations at the B3LYP/6-31G* level of theory were used to confirm the high reactivity of the terminal alkyne as a dipolarophile. Quantum calculations were also used to investigate the mechanism of both the uncatalyzed and copper (I)-catalyzed azide–alkyne cycloaddition reaction (CuAAC). The catalyzed reaction gives complete regioselectivity via a stepwise mechanism streamlining experimental observations. The calculated free-energy barriers 4.33 kcal/mol and 29.35 kcal/mol for the 1,4- and 1,5-regioisomers, respectively, explain the marked regioselectivity of the CuAAC reaction. 

   more » « less