An official website of the United States government
Abstract Muddy marine sediments are elastic materials in which bubbles grow and worms extend their burrows by fracture. Bubble growth and burrowing behavior are dependent on the stiffness and fracture toughness (KIc) of these muds. This article describes a custom laboratory apparatus to measure the fracture toughness of muddy, cohesive sediments using a bubble injection method. The system induces fracture in sediment samples by incrementally injecting air through a needle inserted into the sediment. The increasing pneumatic pressure is monitored until it drops abruptly, indicating bubble formation. Fracture toughness is then calculated from the peak pressure at which fracture occurred, following cavitation rheology methods developed for soft gels. The system has produced measurements that compare well to previous data but with better spatial resolution, allowing for characterization of spatial heterogeneity on small scales.
more »
« less
Material Properties of Sediments Steer Burrowers and Effect Bioturbation
Abstract Infaunal organisms mix sediments through burrowing, ingestion and egestion, enhancing fluxes of nutrients and oxygen, yet the mechanisms underlying bioturbation remain unresolved. Burrows are extended through muddy sediments by fracture, and we hypothesize that the cohesive properties of sediments play an important but unexplored role in resisting bioturbation. Specifically, we suggest that crack branching, tortuosity, and microcracking are important in freeing particles from the cohesive matrix, and that the sediment properties that affect these processes are important predictors of bioturbation. We use finite element modeling and simplified, mechanics‐based models to explore the relative importance of sediment mechanical properties and worm behaviors in determining crack propagation paths. Our results show that crack propagation direction depends on variability in fracture toughness, and that applying more force to one side of the burrow wall, simulating “steering” behavior, has surprisingly little effect on crack propagation direction. Burrowers instead steer by choosing among crack branches. Paths created by burrowing worms in natural sediments are mostly straight with some crack branching, consistent with modeling results. Crack branching also requires sufficient stored elastic energy to drive two cracks, and worms can exert larger forces resulting in more stored energy in stiffer sediments. This implies that more crack branching and consequently more particle mixing occurs in heterogeneous sediments with low fracture toughness relative to stiffness. Whether sediments with greater potential for crack branching also experience higher bioturbation remains to be tested, but these results indicate that material properties of sediments may be important in resisting or facilitating bioturbation.
more »
« less
- Award ID(s):
- 1844910
- PAR ID:
- 10425376
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Journal of Geophysical Research: Biogeosciences
- Volume:
- 128
- Issue:
- 6
- ISSN:
- 2169-8953
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Unlike micromechanics failure models that have a well-defined crack path, phase-field fracture models are capable of predicting the crack path in arbitrary geometries and dimensions by utilizing a diffuse representation of cracks. However, such models rely on the calibration of a fracture energy (Gc) and a regularization length-scale (lc) parameter, which do not have a strong micromechanical basis. Here, we construct the equivalent crack-tip cohesive zone laws representing a phase-field fracture model, to elucidate the effects of Gc and lc on the fracture resistance and crack growth mechanics under mode I K-field loading. Our results show that the cohesive zone law scales with increasing Gc while maintaining the same functional form. In contrast, increasing lc broadens the process zone and results in a flattened traction-separation profile with a decreased but sustained peak cohesive traction over longer separation distances. While Gc quantitatively captures the fracture initiation toughness, increasing Gc coupled with decreasing lc contributes to a rising fracture resistance curve and a higher steady-state toughness—both these effects cumulate in an evolving cohesive zone law with crack progression. We discuss the relationship between these phase-field parameters and process zone characteristics in the material.more » « less
-
An experimental study is performed to investigate the quasi-static fracture toughness and damage monitoring capabilities of liquid metal (75.5% Gallium/24.5% Indium) reinforced intraply glass/carbon hybrid composites. Two different layups (G-0, where glass fibers are along the crack propagation direction; C-0, where carbon fibers are along the crack propagation direction) and two different weight percentages of liquid metal (1% and 2%) are considered in the fabrication of the composites. A novel four-probe technique is employed to determine the piezo-resistive damage response under mode-I fracture loading conditions. The effect of layups and liquid metal concentrations on fracture toughness and changes in piezo-resistance response is discussed. The C-composite without liquid metal demonstrated higher fracture toughness compared to that of the G-composite due to carbon fiber breakage. The addition of liquid metal decreases the fracture initiation toughness of both G- and C-composites. Scanning electron microscopy images show that liquid metal takes the form of large liquid metal pockets and small spherical droplets on the fracture surfaces. In both C- and G-composites, the peak resistance change of composites with 2% liquid metal is substantially lower than that of both no-liquid metal and 1% liquid metal composites.more » « less
-
Energy dissipation around a propagating crack is the primary mechanism for the enhanced fracture toughness in viscoelastic solids. Such dissipation is spatially non-uniform and is highly coupled to the crack propagation process due to the history-dependent nature of viscoelasticity. We present an experimental approach to map the dissipation field during crack propagation in soft viscoelastic solid. Specifically, we track randomly distributed tracer particles to measure the evolving deformation field. The measured deformation field is then put into a nonlinear constitutive model to determine the dissipation field. Our methodology was used to investigate the deformation and dissipation fields around a propagating crack in a Polyampholyte (PA) hydrogel. The deformation field measurements allowed us to assess whether the commonly assumed translational invariance in viscoelastic fracture theories holds true in practical experiments. Furthermore, by combining the obtained deformation fields with a nonlinear viscoelastic model, we captured the complete history of the dissipation field during crack propagation. We found that dissipation occurred even at material points that are a few millimeters away from the crack tip. The mapped dissipation field also enabled the separate determination of the intrinsic and dissipative components of fracture toughness for the viscoelastic hydrogel.more » « less
-
Abstract The evolutionary rise of powerful new ecosystem engineering impacts is thought to have played an important role in driving waves of biospheric change across the Ediacaran–Cambrian transition (ECT;c. 574–538 Ma). Among the most heavily cited of these is bioturbation (organism‐driven sediment disturbance) as these activities have been shown to have critical downstream geobiological impacts. In this regard priapulid worms are crucial; trace fossils thought to have been left by priapulan‐grade animals are now recognized as appearing shortly before the base of the Cambrian and represent some of the earliest examples of bed‐penetrative bioturbation. Understanding the ecosystem engineering impacts of priapulids may thus be key to reconstructing drivers of the ECT. However, priapulids are rare in modern benthic ecosystems, and thus comparatively little is known about the behaviours and impacts associated with their burrowing. Here, we present the early results of neoichnological experiments focused on understanding the ecosystem engineering impacts of priapulid worms. We observe for the first time a variety of new burrowing behaviours (including the formation of linked burrow networks and long in‐burrow residence times) hinting at larger ecosystem engineering impacts in this group than previously thought. Finally, we identify means by which these results may contribute to our understanding of tracemakers across the ECT, and the role they may have had in shaping the latest Ediacaran and earliest Cambrian biosphere.more » « less
