An official website of the United States government
Abstract 2D hybrid organic–inorganic perovskites are potentially promising materials as passivation layers that can enhance the efficiency and stability of perovskite photovoltaics. The ability to suppress ion transport is proposed as a stabilization mechanism, yet an effective characterization of relevant modes of halide diffusion in 2D perovskites is nascent. In light of this knowledge gap, molecular dynamics simulations with enhanced sampling and experimental validation to systematically characterize how ligand chemistry in seven (R‐NH3)2PbI4systems impacts halide diffusion, particularly in the out‐of‐plane direction is combined. It is found that increasing stiffness and length of ligands generally inhibits ion transport, while increasing ligand polarization generally enhances it. Structural and energetic analyses of the migration pathways provide quantitative explanations for these trends, which reflect aspects of the disorder of the organic layer. Overall, this mechanistic analysis greatly enhances the current understanding of halide migration in 2D hybrid organic–inorganic perovskites and yields insights that can inform the design of future passivation materials.
more »
« less
Unveiling the Fatigue Behavior of 2D Hybrid Organic–Inorganic Perovskites: Insights for Long‐Term Durability
Abstract 2D hybrid organic–inorganic perovskites (HOIPs) are commonly found under subcritical cyclic stresses and suffer from fatigue issues during device operation. However, their fatigue properties remain unknown. Here, the fatigue behavior of (C4H9‐NH3)2(CH3NH3)2Pb3I10, the archetype 2D HOIP, is systematically investigated by atomic force microscopy (AFM). It is found that 2D HOIPs are much more fatigue resilient than polymers and can survive over 1 billion cycles. 2D HOIPs tend to exhibit brittle failure at high mean stress levels, but behave as ductile materials at low mean stress levels. These results suggest the presence of a plastic deformation mechanism in these ionic 2D HOIPs at low mean stress levels, which may contribute to the long fatigue lifetime, but is inhibited at higher mean stresses. The stiffness and strength of 2D HOIPs are gradually weakened under subcritical loading, potentially as a result of stress‐induced defect nucleation and accumulation. The cyclic loading component can further accelerate this process. The fatigue lifetime of 2D HOIPs can be extended by reducing the mean stress, stress amplitude, or increasing the thickness. These results can provide indispensable insights into designing and engineering 2D HOIPs and other hybrid organic–inorganic materials for long‐term mechanical durability.
more »
« less
- Award ID(s):
- 2311573
- PAR ID:
- 10429676
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Science
- Volume:
- 10
- Issue:
- 26
- ISSN:
- 2198-3844
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Hybrid organic–inorganic perovskites (HOIPs) have emerged as a promising class of materials for optoelectronic and spintronic applications. Layered two-dimensional (2D) HOIP variants have received considerable attention, primarily due to their unique properties that can be modulated through the tailored selection of both organic and inorganic components. The spin splitting in the band structure due to the strong spin–orbit coupling is one of the most intriguing properties of such 2D HOIPs materials for their potential utility in spintronics. In addition to observing the spin splitting in equilibrium due to the non-centrosymmetric structure, the possibility of having dynamic spin splitting at room temperature of the otherwise centrosymmetric systems has become a topic of great debate. While modern first-principles molecular dynamics (FPMD) simulation is able to address such a question in principle by taking into account the lattice anharmonicity in electronic structure calculation, the finite-size error poses a great challenge in practice. In this work, we employ a machine learning (ML) model to overcome this practical limitation to investigate the dynamic spin splitting in phenylethyl ammonium lead iodide 2D HOIP. Specifically, we use the deep potential molecular dynamics approach [Zeng et al., J. Chem. Phys. 159(5), 054801 (2023)] for ML FPMD simulation, and we also develop a surrogate model for predicting the spin splitting based on the recent finding that relates the spin splitting to structural descriptors in 2D HOIPs. Our work shows that even in globally centrosymmetric structures, the inclusion of lattice anharmonicity can induce dynamic spin splitting at room temperature.more » « less
-
Abstract Excitons, bound electron–hole pairs, in two-dimensional hybrid organic inorganic perovskites (2D HOIPs) are capable of forming hybrid light-matter states known as exciton-polaritons (E–Ps) when the excitonic medium is confined in an optical cavity. In the case of 2D HOIPs, they can self-hybridize into E–Ps at specific thicknesses of the HOIP crystals that form a resonant optical cavity with the excitons. However, the fundamental properties of these self-hybridized E–Ps in 2D HOIPs, including their role in ultrafast energy and/or charge transfer at interfaces, remain unclear. Here, we demonstrate that >0.5 µm thick 2D HOIP crystals on Au substrates are capable of supporting multiple-orders of self-hybridized E–P modes. These E–Ps have high Q factors (>100) and modulate the optical dispersion for the crystal to enhance sub-gap absorption and emission. Through varying excitation energy and ultrafast measurements, we also confirm energy transfer from higher energy E–Ps to lower energy E–Ps. Finally, we also demonstrate that E–Ps are capable of charge transport and transfer at interfaces. Our findings provide new insights into charge and energy transfer in E–Ps opening new opportunities towards their manipulation for polaritonic devices.more » « less
-
Abstract The electrical resistance of metal-polymer conductive inks increases as they undergo cyclic loading, posing a major challenge to their reliability as interconnect materials for flexible electronic devices. To characterize an ink’s fatigue performance, extensive electro-mechanical testing is usually performed. Phenomenological models that can accurately predict the resistance increase with cyclic loading can save time and be useful in flexible conductor design against fatigue failure. One such model was recently developed for only one composite ink type. The model is based on experiments monitoring resistance under monotonic stretch data and multiple experiments measuring the rate of increase of the resistance under different strain amplitudes and mean strains. The current work examines whether such resistance rate model could be generalized to apply for more types of composite inks. Two composite inks with different binder material, metal flake sizes and shapes, and substrate material were experimentally tested under monotonic and cyclic loading. It was found that the two new inks are also more sensitive to strain amplitude than mean strain. The resistance rate model accurately predicts early/catastrophic failure (<1000 cycles) in all inks and conservatively estimates high fatigue life for low strain amplitudes. A protocol detailing the procedures for applying the resistance model to new inks is outlined.more » « less
-
Abstract The chemical stabilities of hybrid perovskite materials demand further improvement toward long‐term and large‐scale photovoltaic applications. Herein, the enhanced chemical stability of CH3NH3PbI3is reported by doping the divalent anion Se2−in the form of PbSe in precursor solutions to enhance the hydrogen‐bonding‐like interactions between the organic cations and the inorganic framework. As a result, in 100% humidity at 40 °C, the 10% w/w PbSe‐doped CH3NH3PbI3films exhibited >140‐fold stability improvement over pristine CH3NH3PbI3films. As the PbSe‐doped CH3NH3PbI3films maintained the perovskite structure, a top efficiency of 10.4% with 70% retention after 700 h aging in ambient air is achieved with an unencapsulated 10% w/w PbSe:MAPbI3‐based cell. As a bonus, the incorporated Se2−also effectively suppresses iodine diffusion, leading to enhanced chemical stability of the silver electrodes.more » « less
