skip to main content

Explore Research Products in the NSF-PAR

This content will become publicly available on July 7, 2024

Title: Stretchable, Breathable, and Washable Fabric Sensor for Human Motion Monitoring
Abstract

Wearable strain sensors for movement tracking are a promising paradigm to improve clinical care for patients with neurological or musculoskeletal conditions, with further applicability to athletic wear, virtual reality, and next‐generation game controllers. Clothing‐like wearable strain sensors can support these use cases, as the fabrics used for clothing are generally lightweight and breathable, and interface with the skin in a manner that is mechanically and thermally familiar. Herein, a fabric capacitive strain sensor is presented and integrated into everyday clothing to measure human motions. The sensor is made of thin layers of breathable fabrics and exhibits high strains (>90%), excellent cyclic stability (>5000 cycles), and high water vapor transmission rates (≈50 g/h m2), the latter of which allows for sweat evaporation, an essential parameter of comfort. The sensor's functionality is verified under conditions similar to those experienced on the surface of the human body (35°C and % relative humidity) and after washing with fabric detergent. In addition, the fabric sensor shows stable capacitance at excitation frequencies up to 1 MHz, facilitating its low‐cost implementation in the Arduino environment. Finally, as a proof of concept, multiple fabric sensors are seamlessly integrated with commercial activewear to collect movement data. With the prioritization of breathability (air permeability and water vapor transmission), the fabric sensor design presented herein paves the way for future comfortable, unobtrusive, and discrete sensory clothing.

  more » « less
Award ID(s):
1954591
NSF-PAR ID:
10430011
Author(s) / Creator(s):
 ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Materials Technologies
Volume:
8
Issue:
17
ISSN:
2365-709X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ( , Sensors)
    null (Ed.)
    Studies with e-textile sensors embedded in garments are typically performed on static and controlled phantom models that do not reflect the dynamic nature of wearables. Instead, our objective was to understand the noise e-textile sensors would experience during real-world scenarios. Three types of sleeves, made of loose, tight, and stretchy fabrics, were applied to a phantom arm, and the corresponding fabric movement was measured in three dimensions using physical markers and image-processing software. Our results showed that the stretchy fabrics allowed for the most consistent and predictable clothing-movement (average displacement of up to −2.3 ± 0.1 cm), followed by tight fabrics (up to −4.7 ± 0.2 cm), and loose fabrics (up to −3.6 ± 1.0 cm). In addition, the results demonstrated better performance of higher elasticity (average displacement of up to −2.3 ± 0.1 cm) over lower elasticity (average displacement of up to −3.8 ± 0.3 cm) stretchy fabrics. For a case study with an e-textile sensor that relies on wearable loops to monitor joint flexion, our modeling indicated errors as high as 65.7° for stretchy fabric with higher elasticity. The results from this study can (a) help quantify errors of e-textile sensors operating “in-the-wild,” (b) inform decisions regarding the optimal type of clothing-material used, and (c) ultimately empower studies on noise calibration for diverse e-textile sensing applications. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al ( , Small)
    Abstract

    Electronic textiles (e‐textiles) that combine the wearing comfort of textiles and the functionality of soft electronics are highly demanded in wearable applications. However, fabricating robust high‐performance stretchable e‐textiles with good abrasion resistance and high‐resolution aesthetic patterns for high‐throughput manufacturing and practical applications remains challenging. Herein, the authors report a new multifunctional e‐textile fabricated via screen printing of the water‐based silver fractal dendrites conductive ink. The as‐fabricated e‐textiles spray‐coated with the invisible waterproofing agent exhibit superior flexibility, water resistance, wearing comfort, air permeability, and abrasion resistance, achieving a low sheet resistance of 0.088 Ω sq−1, high stretchability of up to 154%, and excellent dynamic stability for over 1000 cyclic testing (ε = 100%). The printed e‐textiles can be explored as strain sensors and ultralow voltage‐driven Joule heaters driven for personalized thermal management. They finally demonstrate an integrated aesthetic smart clothing made of their multifunctional e‐textiles for human motion detection and body‐temperature management. The printed e‐textiles provide new opportunities for developing novel wearable electronics and smart clothing for future commercial applications.

     
    more » « less
  3. ; ; ; ( , Science Advances)
    Personal moisture management fabrics that facilitate sweat transport away from the skin are highly desirable for wearer’s comfort and performance. Here, we demonstrate a “skin-like” directional liquid transport fabric, which enables continuous one-way liquid flow through spatially distributed channels acting like “sweating glands” yet repels external liquid contaminants. The water transmission rate can be 15 times greater than that of best commercial breathable fabrics. This exceptional property is achieved by creating gradient wettability channels across a predominantly superhydrophobic substrate. The flow directionality is explained by the Gibbs pinning criterion. The permeability, mechanical property, and abrasion resistance (up to 10,000 cycles) of the fabric were not affected by the treatment. In addition to functional clothing, this concept can be extended for developing materials for oil-water separation, wound dressing, geotechnical engineering, flexible microfluidics, and fuel cell membranes. 
    more » « less
  4. ; ; ; ( , Advanced Materials Technologies)
    Abstract

    Progress in soft and stretchable electronics depends on energy sources that are mechanically compliant, elastically deformable, and renewable. Energy harvesting using triboelectric nanogenerators (TENGs) made from soft materials provides a promising approach to address this critical need. Here, an elastomeric composite is introduced with sedimented liquid metal (LM) droplets for TENG‐based energy harvesting that relies on assembly of the LM to form phase‐separated conductive and insulating regions. The sedimented LM elastomer TENG (SLM‐TENG) exhibits ultrahigh stretchability (strain limit>500% strain), skin‐like compliance (modulus<60 kPa), reliable device stability (>10 000 cycles), and appreciable electrical output performance (max peak power density=1 mW cm−2). SLM‐TENGs can be integrated with highly elastic stretchable fabrics, thereby enabling broad integration with wearable electronics. A stretchable and wearable SLM‐TENG is demonstrated that harvests energy from human motion through a patch attached to the knee or integrated into exercise clothing. This body‐mounted TENG device can generate enough electricity to fully power a wearable computing device (hygro‐thermometer with digital display) after 2.2 min of running on a treadmill.

     
    more » « less
  5. ; ( , Advanced Materials Technologies)
    Abstract

    Wearable wireless passive sensors are powerful potential building blocks of modern body area networks. However, these sensors are often hampered by numerous issues including restrictive read‐out distances due to near‐field coupling, fundamental tradeoffs in size/spectral performance, and unreliable sensor tracking during activity. Here, to overcome such issues implementing wearable sensing systems exhibiting coupled magnetic resonances are demonstrated. This approach is utilized to augment wireless telemetry from fully wearable, passive (zero electronics) resonator chains. Secondary receiver coils are integrated into fabric or skin to facilitate augmented read‐out from epidermal sweat, moisture, or pressure sensors—herein exhibiting enhanced read‐out range, relaxed constraints in sensor size (sensor spectral response becomes untethered from size) and reader‐sensor orientation. Unlike existing schemes, this readout method enables decoupled co‐readout of the sensor's distance and status, employed here for co‐measurement with human respiration. This type of decoupled readout can help compensate for movements that are so common in wearable monitoring. Simple to implement and requiring no microelectronics, this scheme streamlines into existing, body‐worn passive wireless telemetric systems with minimal modification.

     
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email