skip to main content

Attention:

The NSF Public Access Repository (NSF-PAR) system and access will be unavailable from 11:00 PM ET on Thursday, October 10 until 2:00 AM ET on Friday, October 11 due to maintenance. We apologize for the inconvenience.


Title: Evaluation and Improvement of an Inflow-Nudging Technique for Idealized Simulations of Convective Boundary Layers
Abstract Recent idealized modeling studies have highlighted the importance of explicitly simulating realistic convective boundary layer (CBL) structures to assess and represent their influence on mesoscale phenomena. The choice of lateral boundary conditions (LBCs) has a substantial impact on these turbulent structures, including the distribution of kinematic and thermodynamic properties within the CBL. While use of periodic LBCs is ideal, open LBCs are required for nonuniform domains (e.g., multiple air masses or land surface types). However, open LBCs result in an unrealistic, laminar CBL structure near the upstream boundary that undoubtedly impacts the evolution of any simulated phenomena. Therefore, there is a need for a modified open LBC option to mitigate this unrealistic structure, while still permitting users to simulate phenomena in nonuniform domains. The Pennsylvania State University–NCAR Cloud Model 1 (CM1), version 19.8, includes an optional inflow-nudging technique to nudge inflow to the base-state wind profile. For the present study, the authors modified this method to one that nudges toward a continually updated, horizontally averaged profile so that the technique may be used for phenomena under evolving conditions. Simulations using LBC choices, including nudging to either the base state or horizontal average, were evaluated relative to respective dual-periodic LBC control simulations with or without vertical wind shear. The horizontal average nudging technique outperformed the traditional open LBCs and nudging to the base state, as demonstrated using a histogram matching technique applied to grid points within the CBL. Ultimately, this work can be used to assist modelers in assessing which LBCs are appropriate for their intended use.  more » « less
Award ID(s):
2113324
NSF-PAR ID:
10430858
Author(s) / Creator(s):
;
Date Published:
Journal Name:
Journal of Applied Meteorology and Climatology
Volume:
61
Issue:
12
ISSN:
1558-8424
Page Range / eLocation ID:
1843 to 1860
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Idealized large-eddy simulations of shallow convection often utilize horizontally periodic computational domains. The development of precipitation in shallow cumulus convection changes the spatial structure of convection and creates large-scale organization. However, the limited periodic domain constrains the horizontal variability of the atmospheric boundary layer. Small computational domains cannot capture the mesoscale boundary layer organization and artificially constrain the horizontal convection structure. The effects of the horizontal domain size on large-eddy simulations of shallow precipitating cumulus convection are investigated using four computational domains, ranging from 40×40km2 to 320×320km2 and fine grid resolution (40 m). The horizontal variability of the boundary layer is captured in computational domains of 160×160km2. Small LES domains (≤40 km) cannot reproduce the mesoscale flow features, which are about 100km long, but the boundary layer mean profiles are similar to those of the larger domains. Turbulent fluxes, temperature and moisture variances, and horizontal length scales are converged with respect to domain size for domains equal to or larger than 160×160km2. Vertical velocity flow statistics, such as variance and spectra, are essentially identical in all domains and show minor dependence on domain size. Characteristic horizontal length scales (i.e., those relating to the mesoscale organization) of horizontal wind components, temperature and moisture reach an equilibrium after about hour 30. 
    more » « less
  2. null (Ed.)
    Abstract Typical environmental conditions associated with horizontal convective rolls (HCRs) and cellular convection have been known for over 50 years. Yet our ability to predict whether HCRs, cellular convection, or no discernable organized (null) circulation will occur within a well-mixed convective boundary layer based upon easily observed environmental variables has been limited. Herein, a large database of 50 cases each of HCR, cellular convection, and null events is created that includes observations of mean boundary layer wind and wind shear, boundary layer depth; surface observations of wind, temperature, and relative humidity; and estimates of surface sensible heat flux. Results from a multiclass linear discriminant analysis applied to these data indicate that environmental conditions can be useful in predicting whether HCRs, cellular convection, or no circulation occurs, with the analysis identifying the correct circulation type on 72% of the case days. This result is slightly better than using a mean convective boundary layer (CBL) wind speed of 6 m s −1 to discriminate between HCRs and cells. However, the mean CBL wind speed has no ability to further separate out cases with no CBL circulation. The key environmental variables suggested by the discriminant analysis are mean sensible heat flux, friction velocity, and the Obukhov length. 
    more » « less
  3. Abstract Unsteadiness and horizontal heterogeneities frequently characterize atmospheric motions, especially within convective storms, which are frequently studied using large-eddy simulations (LES). The models of near-surface turbulence employed by atmospheric LES, however, predominantly assume statistically steady and horizontally homogeneous conditions (known as the equilibrium approach). The primary objective of this work is to investigate the potential consequences of such unrealistic assumptions in simulations of tornadoes. Cloud Model 1 (CM1) LES runs are performed using three approaches to model near-surface turbulence: the “semi-slip” boundary condition (which is the most commonly used equilibrium approach), a recently proposed nonequilibrium approach that accounts for some of the effects of turbulence memory, and a nonequilibrium approach based on thin boundary layer equations (TBLE) originally proposed by the engineering community for smooth-wall boundary layer applications. To be adopted for atmospheric applications, the TBLE approach is modified to account for the surface roughness. The implementation of TBLE into CM1 is evaluated using LES results of an idealized, neutral atmospheric boundary layer. LES runs are then performed for an idealized tornado characterized by rapid evolution, strongly curved air parcel trajectories, and substantial horizontal heterogeneities. The semi-slip boundary condition, by design, always yields a surface shear stress opposite the horizontal wind at the lowest LES grid level. The nonequilibrium approaches of modeling near-surface turbulence allow for a range of surface-shear-stress directions and enhance the resolved turbulence and wind gusts. The TBLE approach even occasionally permits kinetic energy backscatter from unresolved to resolved scales. Significance Statement The traditional approach of modeling the near-surface turbulence is not suitable for a tornado characterized by rapid evolution, strongly curved air parcel trajectories, and substantial horizontal heterogeneities. To understand the influence of statistically unsteady and horizontally heterogeneous near-surface conditions on tornadoes, this work adopts a fairly sophisticated approach from the engineering community and implements it into a widely used atmospheric model with necessary modifications. Compared to the traditional approach, the newly implemented approach produces more turbulent near-surface winds, more flexible surface-drag directions, and stronger wind gusts. These findings suggest a simulated tornado is very sensitive to the modeling approach of near-surface turbulence. 
    more » « less
  4. Abstract

    Recent studies have demonstrated the sensitivity of simulated tropical cyclone (TC) intensity to horizontal diffusion in numerical models. It is unclear whether such sensitivity comes from the horizontal diffusion in or above the boundary layer. To address this issue, both an Ooyama-type model and a full-physics model are used to conduct sensitivity experiments with reduced or enlarged horizontal mixing length (lh) in the boundary layer and/or in the free atmosphere. Results from both models show that enlarging (reducing)lhthroughout the model domain considerably reduces (increases) the TC intensification rate and quasi-steady intensity. A new finding is that changinglhabove the boundary layer imposes a much greater influence than that in the boundary layer. Largelhabove the boundary layer is found to effectively reduce the radial gradient of tangential wind inside the radius of maximum tangential wind and thus the inward flux of absolute vorticity, reducing the positive tangential wind tendency and the TC intensification rate and the steady-state intensity. In contrast, although largerlhin the boundary layer reduces the boundary layer tangential wind tendency, it also leads to the more inward-penetrated inflow and thus enhances the inward flux of absolute vorticity, which offsets part of the direct negative contribution by horizontal diffusion, making the net change in tangential wind tendency not obvious. Results from three-dimensional simulations also show that the resolved eddies contribute negatively to TC spinup whenlhis small, while its effect weakens whenlhis enhanced either in or above the boundary layer.

     
    more » « less
  5. This talk presents results from the authors’ recent work on evaluating the role of turbulence and boundary-layer parameterizations on hurricane intensification. We show that observation-based modification of these physical parameterizations significantly improved the HWRF intensity forecast. Turbulent mixing in both the vertical and horizontal directions are found to be crucial for hurricane spin-up dynamics in 3D numerical simulations and HWRF forecasts. Vertical turbulent mixing regulates the inflow strength and the location of boundary-layer convergence that in turns regulates the distribution of deep convection and the intensification of the whole hurricane vortex. Convergence of angular momentum in the boundary layer that is a key component of the hurricane spin-up theory is also found to be regulated by vertical turbulent mixing in connection to the boundary layer inflow. Horizontal turbulent mixing, on the other hand, mainly influences the eddy momentum flux inside the radius of the maximum wind speed in the angular momentum budget. The effect of horizontal turbulent mixing on the convergence of angular momentum is on smoothing the radial gradient of the angular momentum when the horizontal mixing length is large. In a sheared storm, both the vertical and horizontal turbulent mixing affect vortex and shear interaction in terms of the evolution of vortex tilt and boundary-layer recovery processes. 
    more » « less