An official website of the United States government
Handheld haptic devices are often limited in rendering capability, as compared to traditional grounded devices. Strenuous design criteria on weight, size, power consumption, and the ungrounded nature of handheld devices, can drive designers to prioritize actuator force or torque production over other components of dynamic range like bandwidth, transparency, and the range of stable impedances. Hybrid actuation, the use of passive and active actuators together, has the potential to increase the dynamic range of handheld haptic devices due to the large passive torque capability, the stabilizing effects of passive actuators, the high bandwidth of conventional DC servomotors, and the synergy between actuators. However, to date the use of hybrid actuation has been limited due to the highly nonlinear torque characteristics of available passive actuators that result in poor rendering accuracy. This paper describes a hybrid actuation approach and novel control topology which aims to solve actuation challenges associated with nonlinear passive actuators in hybrid and handheld haptic devices. The performance of the device is assessed experimentally, and the approach is compared to existing handheld devices.
more »
« less
Handheld Haptic Device with Coupled Bidirectional Input
Handheld kinesthetic haptic interfaces can provide greater mobility and richer tactile information as compared to traditional grounded devices. In this paper, we introduce a new handheld haptic interface which takes input using bidirectional coupled finger flexion. We present the device design motivation and design details and experimentally evaluate its performance in terms of transparency and rendering bandwidth using a handheld prototype device. In addition, we assess the device's functional performance through a user study comparing the proposed device to a commonly used grounded input device in a set of targeting and tracking tasks.
more »
« less
- Award ID(s):
- 2152163
- PAR ID:
- 10432802
- Date Published:
- Journal Name:
- IEEE World Haptics Conference
- ISSN:
- 2835-9518
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
We present CrazyJoystick, a flyable handheld joystick allowing seamless interaction methods to change between joystick and hand-tracking while displaying on-demand haptic feedback in extended reality (XR). Our system comprises a quadrotor that can autonomously approach the user when needed, addressing the limitations of conventional handheld and wearable devices that require continuous carrying throughout interactions. CrazyJoystick dynamically reallocates all thrust for haptic rendering during stationary states, eliminating the need to hover while delivering feedback. A customized cage allows users to grasp the device and interact with virtual objects, receiving 3.5 degree-of-freedom feedback. This novel transition method allows us to harvest the aerial mobility from multi-rotor based haptic devices, while having high force-to-weight ratios from being handheld during interaction. This paper describes the design and implementation of CrazyJoystick, evaluates its force and torque performance, and usability of the system in three VR applications. Our evaluation of torque rendering found that users can perceive the direction with an accuracy of 92.2%. User studies further indicated that the system significantly improves presence in VR environments. Participants found on-demand haptic feedback intuitive and enjoyable, emphasizing the potential of CrazyJoystick to redefine immersive interactions in XR through portable and adaptive feedback mechanisms.more » « less
-
Vibration is ubiquitous as a mode of haptic communication, and is used widely in handheld devices to convey events and notifications. The miniaturization of electromechanical actuators that are used to generate these vibrations has enabled designers to embed such actuators in wearable devices, conveying vibration at the wrist and other locations on the body. However, the rigid housings of these actuators mean that such wearables cannot be fully soft and compliant at the interface with the user. Fluidic textile-based wearables offer an alternative mechanism for haptic feedback in a fabric-like form factor. To our knowledge, fluidically driven vibrotactile feedback has not been demonstrated in a wearable device without the use of valves, which can only enable low-frequency vibration cues and detract from wearability due to their rigid structure. We introduce a soft vibrotactile wearable, made of textile and elastomer, capable of rendering high-frequency vibration. We describe our design and fabrication methods and the mechanism of vibration, which is realized by controlling inlet pressure and harnessing a mechanical hysteresis. We demonstrate that the frequency and amplitude of vibration produced by our device can be varied based on changes in the input pressure, with 0.3 to 1.4 bar producing vibrations that range between 160 and 260 Hz at 13 to 38 g, the acceleration due to gravity. Our design allows for controllable vibrotactile feedback that is comparable in frequency and outperforms in amplitude relative to electromechanical actuators, yet has the compliance and conformity of fully soft wearable devices.more » « less
-
We propose a haptic device that alters the perceived softness of real rigid objects without requiring to instrument the objects. Instead, our haptic device works by restricting the user's fingerpad lateral deformation via a hollow frame that squeezes the sides of the fingerpad. This causes the fingerpad to become bulgier than it originally was—when users touch an object's surface with their now-restricted fingerpad, they feel the object to be softer than it is. To illustrate the extent of softness illusion induced by our device, touching the tip of a wooden chopstick will feel as soft as a rubber eraser. Our haptic device operates by pulling the hollow frame using a motor. Unlike most wearable haptic devices, which cover up the user's fingerpad to create force sensations, our device creates softness while leaving the center of the fingerpad free, which allows the users to feel most of the object they are interacting with. This makes our device a unique contribution to altering the softness of everyday objects, creating “buttons” by softening protrusions of existing appliances or tangibles, or even, altering the softness of handheld props for VR. Finally, we validated our device through two studies: (1) a psychophysics study showed that the device brings down the perceived softness of any object between 50A-90A to around 40A (on Shore A hardness scale); and (2) a user study demonstrated that participants preferred our device for interactive applications that leverage haptic props, such as making a VR prop feel softer or making a rigid 3D printed remote control feel softer on its button.more » « less
-
Vibration is a widely used mode of haptic communication, as vibrotactile cues provide salient haptic notifications to users and are easily integrated into wearable or handheld devices. Fluidic textile-based devices offer an appealing platform for the incorporation of vibrotactile haptic feedback, as they can be integrated into clothing and other conforming and compliant wearables. Fluidically driven vibrotactile feedback has primarily relied on valves to regulate actuating frequencies in wearable devices. The mechanical bandwidth of such valves limits the range of frequencies that can be achieved, particularly in attempting to reach the higher frequencies realized with electromechanical vibration actuators ( > 100 Hz). In this paper, we introduce a soft vibrotactile wearable device, constructed entirely of textiles and capable of rendering vibration frequencies between 183 and 233 Hz with amplitudes ranging from 23 to 114 g . We describe our methods of design and fabrication and the mechanism of vibration, which is realized by controlling inlet pressure and harnessing a mechanofluidic instability. Our design allows for controllable vibrotactile feedback that is comparable in frequency and greater in amplitude relative to state-of-the-art electromechanical actuators while offering the compliance and conformity of fully soft wearable devices.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- The DOI is not currently available.
