An official website of the United States government
Impedance based kinesthetic haptic devices have been a focus of study for many years. Factors such as delay and the dynamics of the device itself affect the stable rendering range of traditional active kinesthetic devices. A parallel hybrid actuation approach, which combines active energy supplying actuators and passive energy absorbing actuators into a single actuator, has recently been experimentally shown to increase the range of stable virtual stiffness a haptic device can achieve when compared to the active component of the actuator alone. This work presents both a stability and rendering range analysis that aims to identify the mechanisms and limitations by which parallel hybrid actuation increases the stable rendering range of virtual stiffness. Increases in actuator stability are analytically and experimentally shown to be linked to the stiffness of the passive actuator.
more »
« less
A Hybrid Active-Passive Actuation and Control Approach for Kinesthetic Handheld Haptics
Handheld haptic devices are often limited in rendering capability, as compared to traditional grounded devices. Strenuous design criteria on weight, size, power consumption, and the ungrounded nature of handheld devices, can drive designers to prioritize actuator force or torque production over other components of dynamic range like bandwidth, transparency, and the range of stable impedances. Hybrid actuation, the use of passive and active actuators together, has the potential to increase the dynamic range of handheld haptic devices due to the large passive torque capability, the stabilizing effects of passive actuators, the high bandwidth of conventional DC servomotors, and the synergy between actuators. However, to date the use of hybrid actuation has been limited due to the highly nonlinear torque characteristics of available passive actuators that result in poor rendering accuracy. This paper describes a hybrid actuation approach and novel control topology which aims to solve actuation challenges associated with nonlinear passive actuators in hybrid and handheld haptic devices. The performance of the device is assessed experimentally, and the approach is compared to existing handheld devices.
more »
« less
- Award ID(s):
- 1830516
- PAR ID:
- 10189211
- Date Published:
- Journal Name:
- 2020 IEEE Haptics Symposium (HAPTICS)
- Page Range / eLocation ID:
- 690 to 697
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Hybrid actuation approaches for haptic interfaces generally suffer from asymmetry in active and passive torque capabilities. This paper describes the design of a high-performance balanced hybrid haptic device, which addresses the asymmetry by combining a high-power, low-impedance active compliant actuation (series-elastic actuator) with energy absorbing high-force passive actuation in parallel with a fast, low-power secondary active actuation. We describe the actuation, design and control approaches and experimentally validate the approach with a one degree-of-freedom testbed. The performance is compared with active only approach and results show significant improvements in stability and rendering range of the device.more » « less
-
null (Ed.)Cooperative robots or “cobots” promise to allow humans and robots to work together more closely while maintaining safety. However, to date the capabilities of cobots are greatly diminished compared to industrial robots in terms of the force and power they are able to safely produce. This is in part due to the actuation choices of cobots. Low impedance robotic actuators aim to solve this problem by attempting to provide an actuator with a combination of low output impedance and a large bandwidth of force control. In short the ideal actuator has a large dynamic range. Existing actuators success and performance has been limited. We propose a high force and high power balanced hybrid active-passive actuator which aims to increase the actuation capability of low impedance actuators and to safely enable high performance larger force and workspace robots. Our balanced hybrid actuator does so, by combining and controlling a series elastic actuator, a small DC motor, and a particle brake in parallel. The actuator provides low and high frequency power producing active torques, along with power absorbing passive torques. Control challenges and advantages of hybrid actuators are discussed and overcome through the use of trajectory optimization, and the safety of the new actuator is evaluated.more » « less
-
Vibration is a widely used mode of haptic communication, as vibrotactile cues provide salient haptic notifications to users and are easily integrated into wearable or handheld devices. Fluidic textile-based devices offer an appealing platform for the incorporation of vibrotactile haptic feedback, as they can be integrated into clothing and other conforming and compliant wearables. Fluidically driven vibrotactile feedback has primarily relied on valves to regulate actuating frequencies in wearable devices. The mechanical bandwidth of such valves limits the range of frequencies that can be achieved, particularly in attempting to reach the higher frequencies realized with electromechanical vibration actuators ( > 100 Hz). In this paper, we introduce a soft vibrotactile wearable device, constructed entirely of textiles and capable of rendering vibration frequencies between 183 and 233 Hz with amplitudes ranging from 23 to 114 g . We describe our methods of design and fabrication and the mechanism of vibration, which is realized by controlling inlet pressure and harnessing a mechanofluidic instability. Our design allows for controllable vibrotactile feedback that is comparable in frequency and greater in amplitude relative to state-of-the-art electromechanical actuators while offering the compliance and conformity of fully soft wearable devices.more » « less
-
We present CrazyJoystick, a flyable handheld joystick allowing seamless interaction methods to change between joystick and hand-tracking while displaying on-demand haptic feedback in extended reality (XR). Our system comprises a quadrotor that can autonomously approach the user when needed, addressing the limitations of conventional handheld and wearable devices that require continuous carrying throughout interactions. CrazyJoystick dynamically reallocates all thrust for haptic rendering during stationary states, eliminating the need to hover while delivering feedback. A customized cage allows users to grasp the device and interact with virtual objects, receiving 3.5 degree-of-freedom feedback. This novel transition method allows us to harvest the aerial mobility from multi-rotor based haptic devices, while having high force-to-weight ratios from being handheld during interaction. This paper describes the design and implementation of CrazyJoystick, evaluates its force and torque performance, and usability of the system in three VR applications. Our evaluation of torque rendering found that users can perceive the direction with an accuracy of 92.2%. User studies further indicated that the system significantly improves presence in VR environments. Participants found on-demand haptic feedback intuitive and enjoyable, emphasizing the potential of CrazyJoystick to redefine immersive interactions in XR through portable and adaptive feedback mechanisms.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1109/HAPTICS45997.2020.ras.HAP20.12.af578b0a
