skip to main content

Title: Geometrical Relations between Slab Dip and the Location of Volcanic Arcs and Back-arc Spreading Centers

The dataset includes the measurements of individual subduction zones defined in the convergence-parallel, trench-perpendicular, and spreading-parallel direction. 


Table S3. Location of each trench, arc, and back-arc defined in a direction parallel to the convergence, and the corresponding distance from the trench to the arc (D_TA), subarc slab depth (H), and from the trench to the back-arc spreading center (D_TB). The slab dip is measured at 50km (Dip50), 100km (Dip100), and 200km (Dip200) and averaged from 0 to 50 km (Dip050), 0 to 100km (Dip0100), 0 to 200km (Dip0200), and 50 to 200km (Dip50200). 

Table S4. Location of each trench, arc, and back-arc defined in a direction perpendicular to the trench, and the corresponding distance from the trench to the arc (D_TA), subarc slab depth (H), and from the trench to the back-arc spreading center (D_TB). The slab dip is measured at 50km (Dip50), 100km (Dip100), and 200km (Dip200) and averaged from 0 to 50 km (Dip050), 0 to 100km (Dip0100), 0 to 200km (Dip0200), and 50 to 200km (Dip50200). 

Table S5. Location of each trench, arc, and back-arc defined in a direction parallel to the spreading direction, and the corresponding distance from the trench to the arc (D_TA), subarc slab depth (H), and from the trench to the back-arc spreading center (D_TB). The slab dip is measured at 50km (Dip50), 100km (Dip100), and 200km (Dip200) and averaged from 0 to 50 km (Dip050), 0 to 100km (Dip0100), 0 to 200km (Dip0200), and 50 to 200km (Dip50200). 


more » « less
Award ID(s):
Author(s) / Creator(s):
; ;
Publisher / Repository:
Date Published:
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    A global study of subduction zone dynamics indicates that the thermal structure of the overriding plate may control arc location. A fast convergence rate and a steep slab dip bring a hotter mantle further into the wedge corner, forming arc volcanoes closer to the trench. Separately, laboratory and numerical experiments showed that the development of a back‐arc spreading center (BASC) is driven by the migration of the subducting hinge, especially following changes in the slab geometry. As both arc location and the deformation regime of the overriding plate depend on slab kinematics and geometry, we investigate the possible correlations between BASC, the position of volcanic arcs, and slab dip at the scale of individual subduction zones. To do this, we compare the distance from trench to arc and trench to BASC at the Mariana, Scotia, Vanuatu, Tonga, and Kermadec subduction zones. In most cases, the arc and BASC are closer to the trench when the slab is dipping steeply. The correlation could result from an interplay between progressive changes in slab geometry and overriding plate deformation. This assumes, on the one hand, that the isotherm at the apex of which the arc forms is tied to a constant slab decoupling depth and, on the other hand, that back‐arc opening accommodates a change in slab dip. As slab dip decreases, both the BASC and the apex of the isotherm controlling the melt focusing move further from the trench. The observed trends are consistent with a slab anchored at 660 km depth.

    more » « less
  2. Abstract

    This study represents the first campaign‐style teleseismic shear wave splitting (SWS) investigation of central Myanmar, an area that is tectonically controlled by the oblique subduction of the Indian Plate underneath the Eurasian Plate. The resulting 678 well‐defined and 247 null SWS measurements obtained from recently deployed 71 broadband seismic stations show that the Indo‐Burma Ranges (IBR) possess mostly N‐S fast orientations that are parallel to the trend of the depth contours of the subducted slab. Relative to the global average of 1.0 s, extremely large splitting times with station‐averaged values ranging from 1.28 to 2.79 s and an area‐averaged value of 2.09 ± 0.55 s are observed in the IBR. In contrast, the Central Basin (CB) and the Shan Plateau (SP) are characterized by slightly larger than normal splitting times. The fast orientations observed in the CB are mostly NE‐SW in the northern part of the study area, N‐S in the central part, and NW‐SE in the southern part. The fast orientations change from nearly N‐S along the N‐S oriented Sagaing Fault, to NW‐SE in the central and eastern portions of the SP. These observations, together with SWS measurements using local S events, crustal anisotropy measurements using P‐to‐S receiver functions, and the estimated depth of the source of anisotropy using the spatial coherency of the splitting parameters, suggest the presence of a trench‐parallel sub‐slab flow system driven by slab rollback, a trench‐perpendicular corner flow, and a trench‐parallel flow possibly entering the mantle wedge through a slab window or gap.

    more » « less

    The Alaska–Aleutian subduction zone represents an ideal location to study dynamics within a mantle wedge. The subduction system spans several thousand kilometres, is characterized by a slab edge, and has ample seismicity. Additionally, the majority of islands along the arc house broad-band seismic instruments. We examine shear wave splitting of local-S phases originating along the length of the subduction zone. We have dense measurement spacing in two regions, the central Aleutians and beneath Alaska. Beneath Alaska, we observe a rotation in fast splitting directions near the edge of the subducting slab. Fast directions change from roughly trench perpendicular away from the slab edge to trench parallel near the boundary. This is indicative of toroidal flow around the edge of the subducting Alaska slab. In the central Aleutians, local-S splitting is primarily oriented parallel to, or oblique to, the strike of the trench. The local-S measurements, however, exhibit a depth dependence where deeper events show more consistently trench-parallel directions indicating prevalent trench-parallel mantle flow. Our local-S shear wave splitting results suggest trench-parallel orientation are likely present along much of the subduction zone excited by the slab edge, but that additional complexities exist along strike.

    more » « less
  4. Hempel, Andrea (Ed.)

    The interaction between subduction zones and oceanic spreading centers is a common tectonic process, and yet our understanding of how it is manifested in the geologic record is limited to a few well-constrained modern and ancient examples. In the Paleogene, at least one oceanic spreading center interacted with the northwestern margin of North America. Several lines of evidence place this triple junction near Washington (USA) and southern British Columbia (Canada) in the early to middle Eocene, and we summarize a variety of new data sets that permit us to track the plate tectonic setting and geologic evolution of this region from 65 to 40 Ma. The North Cascades segment of the voluminous Coast Mountains continental magmatic arc experienced a magmatic lull between ca. 60 and 50 Ma interpreted to reflect low-angle subduction. During this period of time, the Swauk Basin began to subside inboard of the paleo-trench in Washington, and the Siletzia oceanic plateau began to develop along the Farallon plate–Kula plate or Farallon plate–Resurrection plate spreading center. Farther east, peraluminous magmatism occurred in the Omineca belt and Idaho batholith. Accretion of Siletzia and ridge-trench interaction occurred between ca. 53 and 49 Ma, as indicated by: (1) near-trench magmatism from central Vancouver Island to northwestern Washington, (2) disruption and inversion of the Swauk Basin during a short-lived contractional event, (3) voluminous magmatism in the Kamloops-Challis belt accompanied by major E-W extension east of the North Cascades in metamorphic core complexes and supra-detachment basins and grabens, and (4) southwestward migration of magmatism across northeastern Washington. These events suggest that flat-slab subduction from ca. 60 to 52 Ma was followed by slab rollback and breakoff during accretion of Siletzia. A dramatic magmatic flare-up was associated with rollback and breakoff between ca. 49.4 and 45 Ma and included bimodal volcanism near the eastern edge of Siletzia, intrusion of granodioritic to granitic plutons in the crystalline core of the North Cascades, and extensive dike swarms in the North Cascades. Transtension during and shortly before the flare-up led to >300 km of total offset on dextral strike-slip faults, formation of the Chumstick strike-slip basin, and subhorizontal ductile stretching and rapid exhumation of rocks metamorphosed to 8–10 kbar in the North Cascades crystalline core. By ca. 45 Ma, the Farallon–Kula (or Resurrection)–North American triple junction was likely located in Oregon (USA), subduction of the Kula or Resurrection plate was established outboard of Siletzia, and strike-slip faulting was localized on the north-striking Straight Creek–Fraser River fault. Motion of this structure terminated by 35 Ma. These events culminated in the establishment of the modern Cascadia convergent margin.

    more » « less
  5. Abstract

    To systematically investigate seismic azimuthal anisotropy in the Sumatra subduction zone and probe mantle dynamics associated with the subduction of the Australian Plate beneath the Sunda Plate, a total of 169 pairs of teleseismic XKS (including PKS, SKKS, SKS) and 115 pairs of localSsplitting parameters are obtained using broadband seismic data recorded at ~70 stations. Additionally, crustal anisotropy in the overriding Sunda Plate is measured by analyzing the moveout ofP‐to‐Sconversions from the Moho using a sinusoidal function. Comparison between the three sets of anisotropy measurements obtained using shear waves with different depths of origin suggests that (1) the crust of the Sunda Plate is anisotropic with mostly trench‐parallel fast orientations and a mean splitting time of 0.28 ± 0.05 s; (2) the mantle wedge is azimuthally anisotropic with dominantly trench‐parallel fast orientations and splitting times ranging from 0.22 to 0.81 s, which generally increase with the focal depth; and (3) subslab anisotropy is mostly trench‐normal beneath the fore‐arc region with an averaged splitting time of 1.48 ± 0.06 s, and becomes trench‐parallel beneath the arc and back‐arc areas with a mean splitting time of 0.33 ± 0.04 s. The resulting lateral and vertical distributions of anisotropy obtained using splitting of three types of shear waves advocate the presence of an entrained subslab flow that is deflected by the mantle transition zone. The flow enters the mantle wedge through a slab window and flows horizontally parallel to the trench.

    more » « less