An official website of the United States government
Abstract The development of practical lithium–sulfur (Li–S) batteries with prolonged cycle life and high Coulombic efficiency is limited by both parasitic reactions from dissolved polysulfides and mossy lithium deposition. To address these challenges, here lithium trithiocarbonate (Li2CS3)‐coated lithium sulfide (Li2S) is employed as a dual‐function cathode material to improve the cycling performance of Li–S batteries. Interestingly, at the cathode, Li2CS3forms an oligomer‐structured layer on the surface to suppress polysulfide shuttle. The presence of Li2CS3alters the conventional sulfur reaction pathway, which is supported by material characterization and density functional theory calculation. At the anode, a stable in situ solid electrolyte interphase layer with a lower Li‐ion diffusion barrier is formed on the Li‐metal surface to engender enhanced lithium plating/stripping performance upon cycling. Consequently, the obtained anode‐free full cells with Li2CS3exhibit a superior capacity retention of 51% over 125 cycles, whereas conventional Li2S cells retain only 26%. This study demonstrates that Li2CS3inclusion is an efficient strategy for designing high‐energy‐density Li–S batteries with extended cycle life.
more »
« less
Lithium Tritelluride as an Electrolyte Additive for Stabilizing Lithium Deposition and Enhancing Sulfur Utilization in Anode‐Free Lithium–Sulfur Batteries
Abstract Despite the potential to become the next‐generation energy storage technology, practical lithium–sulfur (Li–S) batteries are still plagued by the poor cyclability of the lithium‐metal anode and sluggish conversion kinetics of S species. In this study, lithium tritelluride (LiTe3), synthesized with a simple one‐step process, is introduced as a novel electrolyte additive for Li–S batteries. LiTe3quickly reacts with lithium polysulfides and functions as a redox mediator to greatly improve the cathode kinetics and the utilization of active materials in the cathode. Moreover, the formation of a Li2TeS3/Li2Te‐enriched interphase layer on the anode surface enhances ionic transport and stabilizes Li deposition. By regulating the chemistry on both the anode and cathode sides, this additive enables a stable operation of anode‐free Li–S batteries with only 0.1 mconcentration in conventional ether‐based electrolytes. The cell with the LiTe3additive retains 71% of the initial capacity after 100 cycles, while the control cell retains only 23%. More importantly, with high utilization of Te, the additive enables significantly better cyclability of anode‐free pouch full‐cells under lean electrolyte conditions.
more »
« less
- Award ID(s):
- 2011415
- PAR ID:
- 10441337
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Functional Materials
- Volume:
- 33
- Issue:
- 43
- ISSN:
- 1616-301X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Anode-free lithium-sulfur batteries feature a cell design with a fully-lithiated cathode and a bare current collector as an anode to control the total amount of lithium in the cell. The lithium stripping and deposition is a key factor in designing an anode-free full cell to realize a practical cell configuration. To realize effective anode protection and achieve a good performance of the anode-free full cell, the manipulation of the electrolyte chemistry toward the modification of the solid-electrolyte interphase on the anode is considered a feasible approach. In this study, the use of neodymium triflate, Nd(OTf)3, as a dual-function electrolyte additive is demonstrated to promote homogeneous catalysis on the cathode conversion reactions and the anode stabilization. Nd(OTf)3 not only facilitates the conversion reaction by promoting the polysulfide adsorption, but also effectively protects the lithium-metal anode and stabilizes the lithium stripping and deposition during cycling. With this electrolyte modification, both Li ǁ Li2S half cells and Ni ǁ Li2S anode-free full cells support a high areal capacity of 5.5 – 7.0 mA h cm-2 and maintain a high Coulombic efficiency of 94 – 95% during cycling.more » « less
-
Enhancing the reversibility of Li is crucial for extending the cycle life of Li‐limited anode‐free lithium–sulfur (Li–S) batteries. Incorporating tellurium (Te) in the system has proven to be highly effective by its reaction with polysulfides and forming a passivating interfacial layer on Li surface, which reduces the Li‐ion diffusion barrier. However, due to the poor utilization of Te, a significant amount of Te is required to improve cell cycling performance. To address this, nanowire‐structured Te (TeNW) is synthesized via a hydrothermal method and applied to Li2S‐based anode‐free cells to minimize the Te content in the system while extending the cell cycle life. Coating TeNW onto the separator greatly enhances Te utilization and demonstrates a significant cycle life improvement (38% retention over 300 cycles) with only 4 wt% TeNW content relative to the active material. The versatility of TeNW is further demonstrated by utilizing them with carbon nanotubes as the anode substrate. The exceptional performance of TeNW is attributed to the high‐surface‐area nanostructure and excellent conductive network, facilitating efficient electron transfer during cell cycling. These advantageous properties position TeNW as a promising material to enhance the cycle life of Li‐limited Li–S batteries.more » « less
-
Lithium-metal batteries (LMBs) are promising alternatives to state-of-the-art Lithium-ion batteries (LIBs) to achieve higher energy densities. However, the poor cyclability of LMBs resulting from Li metal anode (Li0) irreversibility and concomitant electrolyte decompositions limits their practical applications. In this study, we reported a per-fluorinated salt, lithium tetrakis(perfluoro-tertbutyloxy)borate (abbreviated as Li-TFOB) as an electrolyte additive for Li-metal batteries, which contains 36 F atoms per molecule. This newly designed ionic additive tuned the chemical composition of the solid-electrolyte interphase (SEI) on Li0 by increasing the amount of LiF and Li-B-O inorganic species. DFT calculations and Molecular dynamics (MD) simulations indicated the preferential reduction of the TFOB anions at Li0, which occurs with a lower free energy change than PF6anions. The designed ionic additive enables the 4.6 V Li||LiNi0.6Mn0.2Co0.2O2 (NMC622) cell to achieve an average CE of 99.1 % and a high-capacity retention of >50 % after 500 cycles. This experiment-simulation joint study illustrated an attractive approach to accelerating the design of electrolytes and interphases for LMBs.more » « less
-
Lithium-sulfur (Li-S) batteries suffer from poor utilization of active material and short cycle life due to the complicated multi-step reaction mechanisms. Herein, three conditional cycling methods, i.e. asymmetrical cycling, constant voltage (CV) discharge cycling, and partial cycling are designed in order to increase the cyclability of Li-S batteries. It is found that the solid deposition process that takes place during the lower plateau of discharge is the major limiting step for achieving high discharge capacity and cycle retention, and the cathode surface coverage can be deferred by applying an optimal discharge/charge rate and CV discharge cycling. The asymmetrical cycling renders a specific capacity of ca. 700 mAh g-1 after 200 cycles, 30% higher than that under symmetrical cycling, while applying a CV discharge cycling enables a full retention of target specific capacity of ca. 800 mAh g-1 over 50 cycles. The partial cycling with a low number of phase transformation steps and reduced surface coverage at the end of discharge/charge also enhances cyclability. This work paves the way for understanding and improving the cycling performance of Li-S batteries without increasing the cost of electrode design or changing the configuration of the cell.more » « less
