An official website of the United States government
Abstract This paper describes the development of mixed B-site pyrochlore Y2MnRuO7electrocatalyst for oxygen evolution reaction (OER) in acidic media, a challenge for the development of low-temperature electrolyzer for green hydrogen production. Recently, several theories have been developed to understand the reaction mechanism for OER, though there is an uncertainty in most of the cases, due to the complex surface structures. Several key factors such as lattice oxygen, defect, electronic structure, oxidation state, hydroxyl group and conductivity were identified and shown to be important to the OER activity. The contribution of each factor to the performance however is often not well understood, limiting their impact in guiding the design of OER electrocatalysts. In this work, we showed mixed B-site pyrochlore Y2MnRuO7catalyst exhibits 14 times higher turnover frequency (TOF) than RuO2while maintaining a low overpotential of ~ 300 mV for the entire testing period of 24 h in acidic electrolyte. X-ray photoelectron spectroscopy (XPS) analysis reveals that this B-site mixed pyrochlore Y2MnRuO7has a higher oxidation state of Ru than those of Y2Ru2O7, which could be crucial for improving OER performance as the broadened and lowered Ru 4d band resulted from the B-site substitution by Mn is beneficial to the OER kinetics.
more »
« less
Organic‐Inorganic Hybrid Crystal‐Assisted Etching of Nickel Foam for the Collectively Exhaustive Electrochemical Performance of Oxygen Evolution Reaction
Abstract In this work, an organic‐inorganic hybrid crystal, violet‐crystal (VC), was used to etch the nickel foam (NF) to fabricate a self‐standing electrode for the water oxidation reaction. The efficacy of VC‐assisted etching manifests the promising electrochemical performance towards the oxygen evolution reaction (OER), requiring only ~356 and ~376 mV overpotentials to reach 50 and 100 mA cm−2, respectively. The OER activity improvement is attributed to the collectively exhaustive effects arising from the incorporation of various elements in the NF, and the enhancement of active site density. Furthermore, the self‐standing electrode is robust, exhibiting a stable OER activity after 4,000 cyclic voltammetry cycles, and ~50 h. The anodic transfer coefficients (αa) show that the first electron transfer step is the rate‐determining step on the surface of NF‐VCs‐1.0 (NF etched by 1 g of VCs) electrode, while the chemical step involving dissociation following the first electron transfer step is identified as the rate‐limiting step in other electrodes. The lowest Tafel slope value observed in the NF‐VCs‐1.0 electrode indicates the high surface coverage of oxygen intermediates and more favorable OER reaction kinetics, as confirmed by high interfacial chemical capacitance and low charge transport/interfacial resistance. This work demonstrates the importance of VCs‐assisted etching of NF to activate the OER, and the ability to predict reaction kinetics and rate‐limiting step based onαavalues, which will open new avenues to identify advanced electrocatalysts for the water oxidation reaction.
more »
« less
- Award ID(s):
- 2119688
- PAR ID:
- 10444023
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Chemistry – A European Journal
- Volume:
- 29
- Issue:
- 52
- ISSN:
- 0947-6539
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
We report an electrodeposition protocol for preparing isolated cobalt oxide single molecules (Co1Ox) and clusters (ConOy) on a carbon fiber nanoelectrode. The as-prepared deposits are able to produce well-defined steady-state voltammograms for the oxygen evolution reaction (OER) in alkaline media, where the equivalent radius (rd) is estimated by the limiting current of hydroxide oxidation in accordance with the electrocatalytic amplification model. The size of isolated clusters obtained from the femtomolar Co2+solution through an atom-by-atom technique can reach as small as 0.21 nm (rd) which is approximately the length of Co–O bond in cobalt oxide. Therefore, the deposit was close to that of a Co1Oxsingle molecule with only one cobalt ion, the minimum unit of the cobalt-based oxygen-evolving catalyst. Additionally, the size-dependent catalysis of the OER on ConOydeposits shows a faster relative rate on the smaller cluster in terms of the potential at a given current density, implying the single molecular catalyst shows a superior OER activity.more » « less
-
Abstract A local electric field is induced to engineer the interface of vanadium pentoxide nanofibers (V2O5‐NF) to manipulate the charge transport behavior and obtain high‐energy and durable supercapacitors. The interface of V2O5‐NF is modified with oxygen vacancies (Vö) in a one‐step polymerization process of polyaniline (PANI). In the charge storage process, the local electric field deriving from the lopsided charge distribution around Vö will provide Coulombic forces to promote the charge transport in the resultant Vö‐V2O5/PANI nanocable electrode. Furthermore, an ≈7 nm porous PANI coating serves as the external percolated charge transport pathway. As the charge transfer kinetics are synergistically enhanced by the dual modifications, Vö‐V2O5/PANI‐based supercapacitors exhibit an excellent specific capacitance (523 F g−1) as well as a long cycling lifespan (110% of capacitance remained after 20 000 cycles). This work paves an effective way to promote the charge transfer kinetics of electrode materials for next‐generation energy storage systems.more » « less
-
Abstract Developing low‐cost, high‐performance electro‐catalysts is essential for large‐scale application of electrochemical energy devices. In this article, reported are the findings in understanding and controlling oxygen defects in PrBa0.5Sr0.5Co1.5Fe0.5O5+δ(PBSCF) for significantly enhancing the rate of oxygen evolution reaction (OER) are reported. Utilizing surface‐sensitive characterization techniques and first‐principle calculations, it is found that excessive oxygen vacancies promote OH−affiliation and lower the theoretical energy for the formation of O* on the surface, thus greatly facilitating the OER kinetics. On the other hand, however, oxygen vacancies also increase the energy band gap and lower the O 2pband center of PBSCF, which may hinder OER kinetics. Still, careful tuning of these competing effects has resulted in enhanced OER activity for PBSCF with oxygen defects. This work also demonstrates that oxygen defects generated by different techniques have very different characteristics, resulting in different impacts on the activity of electrodes. In particular, PBSCF nanotubes after electrochemical reduction exhibit outstanding OER activity compared with the recently reported perovskite‐based catalysts.more » « less
-
Abstract Reducible oxides are widely used catalyst supports that can increase oxidation reaction rates by transferring lattice oxygen at the metal-support interface. There are many outstanding questions regarding the atomic-scale dynamic meta-stability (i.e., fluxional behavior) of the interface during catalysis. Here, we employ aberration-correctedoperandoelectron microscopy to visualize the structural dynamics occurring at and near Pt/CeO2interfaces during CO oxidation. We show that the catalytic turnover frequency correlates with fluxional behavior that (a) destabilizes the supported Pt particle, (b) marks an enhanced rate of oxygen vacancy creation and annihilation, and (c) leads to increased strain and reduction in the CeO2support surface. Overall, the results implicate the interfacial Pt-O-Ce bonds anchoring the Pt to the support as being involved also in the catalytically-driven oxygen transfer process, and they suggest that oxygen reduction takes place on the highly reduced CeO2surface before migrating to the interfacial perimeter for reaction with CO.more » « less
