An official website of the United States government
Transition Metal Carbo‐Chalcogenide “TMCC:” A New Family of 2D Materials
Abstract Here, a new family of 2D transition metal carbo‐chalcogenides (TMCCs) is reported, which can be considered a combination of two well‐known families, TM carbides (MXenes) and TM dichalcogenides (TMDCs), at the atomic level. Single sheets are successfully obtained from multilayered Nb2S2C and Ta2S2C using electrochemical lithiation followed by sonication in water. The parent multilayered TMCCs are synthesized using a simple, scalable solid‐state synthesis followed by a topochemical reaction. Superconductivity transition is observed at 7.55 K for Nb2S2C. The delaminated Nb2S2C outperforms both multilayered Nb2S2C and delaminated NbS2as an electrode material for Li‐ion batteries. Ab initio calculations predict the elastic constant of TMCC to be over 50% higher than that of TMDC.
more »
« less
- PAR ID:
- 10445042
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- Volume:
- 34
- Issue:
- 26
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
We report the growth of AlBN/β‐Nb2N nitride epitaxial heterostructures in which the AlBN is ferroelectric, and β‐Nb2N with metallic resistivity ≈40 μ at 300 K becomes superconducting belowTC ≈ 0.5 K. Using nitrogen plasma molecular beam epitaxy, we grow hexagonal β‐Nb2N films on c‐plane Al2O3substrates, followed by wurtzite AlBN. The AlBN is in epitaxial registry and rotationally aligned with the β‐Nb2N, and the hexagonal lattices of both nitride layers make angles of 30° with the hexagonal lattice of the Al2O3substrate. The B composition of the AlBN layer is varied from 0 to 14.7%. It is found to depend weakly on the B flux, but increases strongly with decreasing growth temperature, indicating a reaction rate‐controlled growth. The increase in B content causes a non‐monotonic change in the a‐lattice constant and a monotonic decrease in the c‐lattice constant of AlBN. Sharp, abrupt epitaxial AlBN/β‐Nb2N/Al2O3heterojunction interfaces and close symmetry matching are observed by transmission electron microscopy. The observation of ferroelectricity and superconductivity in epitaxial nitride heterostructures opens avenues for novel electronic and quantum devices.more » « less
-
Abstract The environmental conical nozzle levitator (E‐CNL) with dual‐wavelength lasers is an extreme environment materials characterization system that was designed to investigate ultra‐high‐temperature materials: refractory metals, oxides, carbides, and borides above 3000 K in a controlled atmosphere. This article details the characterizations using this system to establish its high‐temperature capabilities and to outline ongoing work on materials under extreme conditions. The system has been used to measure the melting point of several oxide materials (TiO2, Tm = 2091 ± 3 K; Al2O3, Tm = 2310 3 K; ZrO2, Tm = 2984 31 K; and HfO2, Tm = 3199 ± 45 K) and several air‐sensitive refractory metals (Ni, Tm = 1740 K; Ti, Tm = 1983 K; Nb, Tm = 2701 K; and Ta, Tm = 3368 K—note: mean ± standard deviation) during levitation which matched literature values within 0.17–2.43 % demonstrating high accuracy and precision. This containerless measurement approach is critical for probing properties without container‐derived contamination, and dual‐wavelength laser heating is essential to heat both relatively poor electrical conductors (some refractory metals and carbides) and insulators (oxides). The highest temperature achieved utilizing both lasers in these experiments was ∼4250 ± 34 K on a 76.6 mg, molten HfO2sample using a normal spectral emissivity of 0.91. Stable levitation was demonstrated on spherical samples (yttria‐stabilized zirconia) while adjusting levitation gas composition from pure oxygen to pure argon, verifying atmospheric control up to 3173 K on solid or molten samples. These successes demonstrate the viability of in situ high‐temperature environmentally controlled studies potentially up to 4000 K on all classes of ultra‐high‐temperature materials in one system. These measurements highlight the E‐CNL system will be essential for the development of next‐generation ultra‐high‐temperature materials for hypersonic platforms, nuclear fission and fusion, and space exploration.more » « less
-
Abstract Decarbonylation along with P‐atom transfer from the phosphaethynolate anion, PCO−, to the NbIVcomplex [(PNP)NbCl2(NtBuAr)] (1) (PNP=N[2‐PiPr2‐4‐methylphenyl]2−; Ar=3,5‐Me2C6H3) results in its coupling with one of the phosphine arms of the pincer ligand to produce a phosphanylidene phosphorane complex [(PNPP)NbCl(NtBuAr)] (2). Reduction of2with CoCp*2cleaves the P−P bond to form the first neutral and terminal phosphido complex of a group 5 transition metal, namely, [(PNP)Nb≡P(NtBuAr)] (3). Theoretical studies have been used to understand both the coupling of the P‐atom and the reductive cleavage of the P−P bond. Reaction of3with a two‐electron oxidant such as ethylene sulfide results in a diamagnetic sulfido complex having a P−P coupled ligand, namely [(PNPP)Nb=S(NtBuAr)] (4).more » « less
-
Abstract Straining the vanadium dimers along the rutilec‐axis can be used to tune the metal‐to‐insulator transition (MIT) of VO2but has thus far been limited to TiO2substrates. In this work VO2/MgF2epitaxial films are grown via molecular beam epitaxy (MBE) to strain engineer the transition temperature (TMIT). First, growth parameters are optimized by varying the synthesis temperature of the MgF2(001) substrate (TS) using a combination of X‐ray diffraction techniques, temperature dependent transport, and soft X‐ray photoelectron spectroscopy. It is determined thatTSvalues greater than 350 °C induce Mg and F interdiffusion and ultimately the relaxation of the VO2layer. Using the optimized growth temperature, VO2/MgF2(101) and (110) films are then synthesized. The three film orientations display MITs with transition temperatures in the range of 15–60 °C through precise strain engineering.more » « less
