An official website of the United States government
Abstract Understanding the effects of flat slab subduction on mountain building, arc magmatism, and basin evolution is fundamental to convergent‐margin tectonics, with implications for potential feedbacks among geodynamic, magmatic, and surface processes. New stratigraphic and geochronological constraints on Cenozoic sedimentation and magmatism in the southern Central Andes of Argentina (31°S) reveal shifts in volcanism, foreland/hinterland basin development, sediment accumulation, and provenance as the retroarc region was structurally partitioned during slab flattening. Detrital zircon U‐Pb age distributions from the western (Calingasta basin), central (Talacasto and Albarracín basins), and eastern (Bermejo foreland basin) segments of the retroarc basin system preserve syndepositional volcanism and orogenic unroofing of multiple tectonic provinces. Initial shortening‐related exhumation of the Principal Cordillera at 24–17 Ma was recorded by the accumulation of distal eolian deposits bearing Oligocene–Eocene zircons from the Andean magmatic arc. The Calingasta basin chronicled volcanism and basement shortening in the Frontal Cordillera at ~17–11 Ma, as marked by an upward coarsening succession of fluvial to alluvial fan deposits with a sustained zircon U‐Pb age component that matches pervasive Permian‐Triassic bedrock in the hinterland. An ~450 km eastward inboard sweep of volcanism at 11 Ma coincided with the inception of flat slab subduction, and subsequent thin‐skinned shortening in the Precordillera fold‐thrust belt that exhumed wedge‐top deposits and induced cratonward (eastward) advance of flexural subsidence into the Bermejo foreland basin. This foreland basin was structurally partitioned as basement uplifts of the Sierras Pampeanas transformed a fluvial megafan sediment routing network into smaller isolated alluvial fan systems fed by adjacent basement blocks.
more »
« less
The role of flat slab subduction, ridge subduction, and tectonic inheritance in Andean deformation
Abstract Convergent plate boundaries show sharp variations in orogenic width and extent of intraplate deformation. Analysis of late Cenozoic contractile deformation along the Andean mountain front and adjacent foreland highlights the contrasting degrees of deformation advance toward the plate interior. The retroarc positions of the Andean topographic front (marked by frontal thrust-belt structures) and foreland deformation front (defined by isolated basement block uplifts) range from 300 to 900 km inboard of the trench axis. Over the ~8000 km arcuate length of the Andes (10°N to 55°S), four discrete maxima of inboard deformation advance are spatially co-located with the Peruvian (5°S–14°S) and Pampean (27°S–33°S) zones of flat slab subduction, the subducted Chile Ridge (45°S–48°S), and the anomalously thick Paleozoic stratigraphic wedge of Bolivia (17°S –23°S). The spatial correspondence of retroarc shortening with specific geodynamic configurations demonstrates the mechanical role of flat slab subduction, slab window development, and combined structural and stratigraphic geometries in shaping the orogenic architecture of Cordilleran margins, largely through lithospheric strengthening, weakening, and/or tectonic inheritance.
more »
« less
- PAR ID:
- 10445597
- Date Published:
- Journal Name:
- Geology
- Volume:
- 50
- Issue:
- 9
- ISSN:
- 0091-7613
- Page Range / eLocation ID:
- 1007 to 1012
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Western North America is the archetypical Cordilleran orogenic system that preserves a Mesozoic to Cenozoic record of oceanic Farallon plate subduction-related processes. After prolonged Late Jurassic through mid-Cretaceous normal-angle Farallon plate subduction that produced the western North American batholith belt and retroarc fold-thrust belt, a period of low-angle, flat-slab subduction during Late Cretaceous−Paleogene time caused upper plate deformation to migrate eastward in the form of the Laramide basement-involved uplifts, which partitioned the original regional foreland basin. Major questions persist about the mechanism and timing of flat-slab subduction, the trajectory of the flat-slab, inter-plate coupling mechanism(s), and the upper-plate deformational response to such processes. Critical for testing various flat-slab hypotheses are the timing, rate, and distribution of exhumation experienced by the Laramide uplifts as recorded by low-temperature thermochronology. In this contribution, we address the timing of regional exhumation of the Laramide uplifts by combining apatite fission-track (AFT) and (U-Th-Sm)/He (AHe) data from 29 new samples with 564 previously published AFT, AHe, and zircon (U-Th)/He ages from Laramide structures in Arizona, Utah, Wyoming, Colorado, Montana, and South Dakota, USA. We integrate our results with existing geological constraints and with new regional cross sections to reconstruct the spatial and temporal history of exhumation driven by Laramide deformation from the mid-Cretaceous to Paleogene. Our analysis suggests a two-stage exhumation of the Laramide province, with an early phase of localized exhumation occurring at ca. 100−80 Ma in Wyoming and Montana, followed by a more regional period of exhumation at ca. 70−50 Ma. Generally, the onset of enhanced exhumation occurs earlier in the northern Laramide province (ca. 90 Ma) and later in the southern Laramide province (ca. 80 Ma). Thermal history models of selected samples along regional cross sections through Utah−Arizona−New Mexico and Wyoming−South Dakota show that exhumation occurred contemporaneously with deformation, implying that Laramide basement block exhumation is coupled with regional deformation. These results have implications for testing proposed migration pathway models of Farallon flat-slab and for how upper-plate deformation is expressed in flat-slab subduction zones in general.more » « less
-
Abstract The Andes of western Argentina record spatiotemporal variations in morphology, basin geometry, and structural style that correspond with changes in crustal inheritance and convergent margin dynamics. Above the modern Pampean flat‐slab subduction segment (27–33°S), retroarc shortening generated a fold‐thrust belt and intraforeland basement uplifts that converge north of ∼29°S, providing opportunities to explore the effects of varied deformation and subduction regimes on synorogenic sedimentation. We integrate new detrital zircon U‐Pb and apatite (U‐Th)/He analyses with sequentially restored, flexurally balanced cross sections and thermokinematic models at ∼28.5–30°S to link deformation with resulting uplift, erosion, and basin accumulation histories. Tectonic subsidence, topographic evolution, and thermochronometric cooling records point to (a) shortening and distal foreland basin accumulation at ∼18–16 Ma, (b) thrust belt migration, changes in sediment provenance, and enhanced flexural subsidence from ∼16 to 9 Ma, (c) intraforeland basement deformation, local flexure, and drainage reorganization at ∼12–7 Ma, and (d) out‐of‐sequence shortening and exhumation of foreland basin fill by ∼8–2 Ma. Thrust belt kinematics and the reactivation of basement heterogeneities strongly controlled tectonic load configurations and subsidence patterns. Geo/thermochronological data and model results resolve increased shortening and combined thrust belt and intraforeland basement loading in response to ridge collision and Neogene shallowing of the subducted oceanic slab. Finally, this study demonstrates the utility of integrated flexural thermokinematic and erosion modeling for evaluating the geometries, rates, and potential drivers of retroarc deformation and foreland basin evolution during changes in subduction.more » « less
-
Unconformities in foreland basins may be generated by tectonic processes that operate in the basin, the adjacent fold–thrust belt or the broader convergent margin. Foreland basin unconformities represent shifts from high accommodation to non-depositional or erosional conditions in which the interruption of subsidence precludes the net accumulation of sediment. This study explores the genesis of long-duration unconformities (>1–20 myr) and condensed stratigraphic sections by considering modern and ancient examples from the Andes of western South America. These case studies highlight the potential geodynamic mechanisms of accommodation reduction and hiatus development in Andean-type retroarc foreland settings, including: (1) shortening-induced uplift in the frontal thrust belt and proximal foreland; (2) the growth and advance of a broad, low-relief flexural forebulge; (3) the uplift of intraforeland basement blocks; (4) tectonic quiescence with regional isostatic rebound; (5) the end of thrust loading and flexural subsidence during oblique convergence; (6) diminished accommodation or sediment supply due to changes in sea-level, climate, erosion or transport; (7) basinwide uplift during flat-slab subduction; and (8) dynamic uplift associated with slab window formation, slab break-off, elevated intraplate (in-plane) stress, or related mantle process. These contrasting mechanisms can be distinguished on the basis of the spatial distribution, structural context, stratigraphic position, palaeoenvironmental conditions, and duration of unconformities and condensed sections. Thematic collection: This article is part of the Fold-and-thrust belts collection available at: https://www.lyellcollection.org/cc/fold-and-thrust-beltsmore » « less
-
During plate convergence, shallow subduction or underthrusting of the lower-plate lithosphere beneath an overriding plate often results in far-field intraplate deformation, as observed in the Late Cretaceous–Paleogene North American Laramide or Cenozoic Himalayan-Tibetan orogen. Perplexingly, during this shallow-slab process, wide expanses of crust between the plate boundary and intraplate orogen do not experience significant synchronous deformation. These apparently undeformed crustal regions may reflect (1) a strong, rigid plate, (2) increased gravitational potential energy (GPE) to resist shortening and uplift, or (3) decoupling of the upper-plate lithosphere from any basal tractions. Here we review the geology of three orogens that formed due to flat slab subduction or underthrusting: the Himalayan-Tibetan, Mesozoic southeast China, and Laramide orogens. These orogens all involved intraplate deformation >1000-km from the plate boundary, large regions of negligible crustal shortening between the plate-boundary and intra-plate thrust belts, hot crustal conditions within the hinterland regions, and extensive upper-plate porphyry copper mineralization. A hot and weak hinterland is inconsistent with it persisting as an undeformed rigid block. GPE analysis suggests that hinterland quiescence is not uniquely due to thickened crust and elevated GPE, as exemplified by shallow marine sedimentation with low surface elevations in SE China. Comparison of these intracontinental orogens allows us to advance a general model, where hot orogenic hinterlands with a weak, mobile lower crust allow decoupling from underlying basal tractions exerted from flat-slab or underthrusting events. This hypothesis suggests that basal tractions locally drive intraplate orogens, at least partially controlled by the strength of the upper-plate lithosphere.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1130/G50094.1
