An official website of the United States government
We propose an efficient inverse design approach for multifunctional optical elements based on adaptive deep diffractive neural networks (a-D 2 NNs). Specifically, we introduce a-D 2 NNs and design two-layer diffractive devices that can selectively focus incident radiation over two well-separated spectral bands at desired distances. We investigate focusing efficiencies at two wavelengths and achieve targeted spectral line shapes and spatial point-spread functions (PSFs) with optimal focusing efficiency. In particular, we demonstrate control of the spectral bandwidths at separate focal positions beyond the theoretical limit of single-lens devices with the same aperture size. Finally, we demonstrate devices that produce super-oscillatory focal spots at desired wavelengths. The proposed method is compatible with current diffractive optics and doublet metasurface technology for ultracompact multispectral imaging and lensless microscopy applications.
more »
« less
Design of ultracompact broadband focusing spectrometers based on diffractive optical networks
We propose the inverse design of ultracompact, broadband focusing spectrometers based on adaptive diffractive optical networks (a-DONs). Specifically, we introduce and characterize two-layer diffractive devices with engineered angular dispersion that focus and steer broadband incident radiation along predefined focal trajectories with the desired bandwidth and nanometer spectral resolution. Moreover, we systematically study the focusing efficiency of two-layer devices with side length L = 100 μ m and focal length f = 300 μ m across the visible spectrum and demonstrate accurate reconstruction of the emission spectrum from a commercial superluminescent diode. The proposed a-DONs design method extends the capabilities of efficient multi-focal diffractive optical devices to include single-shot focusing spectrometers with customized focal trajectories for applications to ultracompact spectroscopic imaging and lensless microscopy.
more »
« less
- Award ID(s):
- 2015700
- PAR ID:
- 10447821
- Date Published:
- Journal Name:
- Optics Letters
- Volume:
- 47
- Issue:
- 24
- ISSN:
- 0146-9592
- Page Range / eLocation ID:
- 6309
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Unidirectional optical systems enable selective control of light through asymmetric processing of radiation, effectively transmitting light in one direction while blocking unwanted propagation in the opposite direction. Here, a reciprocal diffractive unidirectional focusing design based on linear and isotropic diffractive layers that are structured is introduced. Using gradient descent‐based optimization, a cascaded set of diffractive layers are spatially engineered at the wavelength scale to focus light efficiently in the forward direction while blocking it in the opposite direction. The forward energy focusing efficiency and the backward energy suppression capabilities of this unidirectional architecture are demonstrated under various illumination angles and wavelengths, illustrating the versatility of the polarization‐insensitive design. Furthermore, it is demonstrated that these designs are resilient to adversarial attacks that utilize wavefront engineering from outside. Experimental validation using terahertz radiation confirmed the feasibility of this diffractive unidirectional focusing framework. Diffractive unidirectional designs can operate across different parts of the electromagnetic spectrum by scaling the resulting diffractive features proportional to the wavelength of light and will find applications in security, defense, and optical communication, among others.more » « less
-
Abstract Subwavelength diffractive optics known as meta-optics have demonstrated the potential to significantly miniaturize imaging systems. However, despite impressive demonstrations, most meta-optical imaging systems suffer from strong chromatic aberrations, limiting their utilities. Here, we employ inverse-design to create broadband meta-optics operating in the long-wave infrared (LWIR) regime (8-12μm). Via a deep-learning assisted multi-scale differentiable framework that links meta-atoms to the phase, we maximize the wavelength-averaged volume under the modulation transfer function (MTF) surface of the meta-optics. Our design framework merges local phase-engineering via meta-atoms and global engineering of the scatterer within a single pipeline. We corroborate our design by fabricating and experimentally characterizing all-silicon LWIR meta-optics. Our engineered meta-optic is complemented by a simple computational backend that dramatically improves the quality of the captured image. We experimentally demonstrate a six-fold improvement of the wavelength-averaged Strehl ratio over the traditional hyperboloid metalens for broadband imaging.more » « less
-
We demonstrate focusing as well as imaging using diffractive microoptics, manufactured by two-photon polymerization grayscale lithography (2GL), that have been 3D printed into porous silicon oxide. While typical doublet lens systems require support structures that hold the lenses in place, our optics are held by the porous media itself, decreasing both the fabrication time and design constraints while increasing the optically active area. Compared to the typical two-photon polymerization fabrication process, 2GL offers better shape accuracy while simultaneously increasing throughput. To showcase 2GL manufactured optics in porous media, we fabricate singlet diffractive lenses with a diameter of 500 µm and numerical apertures of up to 0.6. We measure the intensity distribution in the focal plane, and along the optical axis. Furthermore, we design and fabricate a doublet lens system for imaging purposes with a diameter of 600 µm and thinner than 60 µm. We examine the imaging performance with a USAF 1951 resolution test chart and determine the resolution to be 287 lp/mm. 3D printing in porous SiO2thus holds great promise for future complex and unconventional microoptical solutions.more » « less
-
Acoustic metasurfaces are two-dimensional architected materials designed to enable non-trivial control of waves, with a thickness that is either thinner than or comparable to the wavelength. However, most metasurfaces today have a fixed geometry and lack the ability to tune acoustic waves on command. This limits their ability to perform multiple functions, such as beam steering and dynamic focusing. This study introduces inflatable acoustic metasurface (IAM) lenses that enable tunable focusing. The IAMs feature two-dimensional diffractive focusing patterns embedded in a membrane that can be inflated nonplanarly through hydraulic control. It is experimentally demonstrated that inflation allows continuous focal length adjustment from –2.49λ to +3.17λ. To characterize the lens performance, changes in focal characteristics, including peak pressure, full width at half-maximum, and full length at half-maximum, are tracked at different levels of inflation. Furthermore, it is shown that IAMs can correct aberrations that occur as the angle of incidence increases in conventional planar lenses. To validate this, IAMs were tested in a concave configuration at a 20° oblique incidence angle. The results of this study may be applicable to fields requiring continuous and real-time response in tunable focusing, including acoustic imaging and communication, ultrasound surgery, and neuromodulation.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1364/OL.475375
