skip to main content

Title: Seismic Strain Rate and Flexure at the Hawaiian Islands Constrain the Frictional Coefficient

Flexure occurs on intermediate geologic timescales (∼1 Myr) due to volcanic‐island building at the Island of Hawaii, and the deformational response of the lithosphere is simultaneously elastic, plastic, and ductile. At shallow depths and low temperatures, elastic deformation transitions to frictional failure on faults where stresses exceed a threshold value, and this complex rheology controls the rate of deformation manifested by earthquakes. In this study, we estimate the seismic strain rate based on earthquakes recorded between 1960 and 2019 at Hawaii, and the estimated strain rate with 10−18–10−15s−1in magnitude exhibits a local minimum or neutral bending plane at 15 km depth within the lithosphere. In comparison, flexure and internal deformation of the lithosphere are modeled in 3D viscoelastic loading models where deformation at shallow depths is accommodated by frictional sliding on faults and limited by the frictional coefficient (μf), and at larger depths by low‐temperature plasticity and high‐temperature creep. Observations of flexure and the seismic strain rate are best‐reproduced by models withμf = 0.3 ± 0.1 and modified laboratory‐derived low‐temperature plasticity. Results also suggest strong lateral variations in the frictional strength of faults beneath Hawaii. Our models predict a radial pattern of compressive stress axes relative to central Hawaii consistent with observations of earthquake pressure (P) axes. We demonstrate that the dip angle of this radial axis is essential to discerning a change in the curvature of flexure, and therefore has implications for constraining lateral variations in lithospheric strength.

more » « less
Award ID(s):
Author(s) / Creator(s):
Publisher / Repository:
DOI PREFIX: 10.1029
Date Published:
Journal Name:
Geochemistry, Geophysics, Geosystems
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Extreme slip at shallow depths on subduction zone faults is a primary contributor to tsunami generation by earthquakes. Improving earthquake and tsunami risk assessment requires understanding the material and structural conditions that favor earthquake propagation to the trench. We use new biomarker thermal maturity indicators to identify seismic faults in drill core recovered from the Japan Trench subduction zone, which hosted 50 m of shallow slip during theMw9.1 2011 Tohoku-Oki earthquake. Our results show that multiple faults have hosted earthquakes with displacement ≥ 10 m, and each could have hosted many great earthquakes, illustrating an extensive history of great earthquake seismicity that caused large shallow slip. We find that lithologic contrasts in frictional properties do not necessarily determine the likelihood of large shallow slip or seismic hazard.

    more » « less
  2. Abstract

    The rheology of oceanic lithosphere is important to our understanding of mantle dynamics and to the emergence and manifestations of plate tectonics. Data from experimental rock mechanics suggest rheology is dominated by three different deformation mechanisms including frictional sliding, low‐temperature plasticity, and high‐temperature creep, from shallow depths at relatively cold temperatures to large depths at relatively high temperatures. However, low‐temperature plasticity is poorly understood. This study further constrains low‐temperature plasticity by comparing observations of flexure at the Hawaiian Islands to predictions from 3‐D viscoelastic loading models with a realistic lithospheric rheology of frictional sliding, low‐temperature plasticity, and high‐temperature creep. We find that previously untested flow laws significantly underpredict the amplitude and overpredict the wavelength of flexure at Hawaii. These flow laws can, however, reproduce observations if they are weakened by a modest reduction (25–40%) in the plastic activation energy. Lithospheric rheology is strongly temperature dependent, and so we explore uncertainties in the thermal structure with different conductive cooling models and convection simulations of plume‐lithosphere interactions. Convection simulations show that thermal erosion from a plume only perturbs the lithospheric temperature significantly at large depths so that when it is added to the thermal structure, it produces a small increase in deflection. In addition, defining the temperature profile by the cooling plate model produces only modest weakening relative to the cooling half‐space model. Therefore, variation of the thermal structure does not appear to be a viable means of bringing laboratory‐derived flow laws for low‐temperature plasticity into agreement with geophysical field observations and modeling.

    more » « less
  3. Abstract

    Controlled and natural source seismic data are used to build a 3‐DPwave model for southern North Island, New Zealand, where the Pacific Plate subducts beneath the Australian Plate at a rate of ~41 mm/year. Our analysis reveals an abrupt along‐strike transition in overthrusting plate structure within Cook Strait. Contrasts in properties (Vp, Vp/Vs, and Qs) likely reflects the degree of deformation in the Australian Plate, where the Alpine‐Wairau and Awatere Faults mark the northern boundary of a terrane that has undergone >50° of clockwise vertical‐axis rotation since the early Miocene. Heterogeneity of the crustal transition is likely associated with changes in frictional and elastic properties that may impact elastic stress accumulation and inhibit southward propagation of megathrust earthquakes. Low connectivity of faults in Cook Strait is consistent with the heterogeneity we observe and may promote complex earthquake triggering by lateral stress loading during earthquakes or slow slip events.

    more » « less
  4. Abstract

    Central and eastern United States (CEUS) have experienced large intraplate earthquakes. Yet, at present there is no comprehensive model to explain stresses, strain, and seismicity in this intraplate setting. Models to explain the intraplate stresses in CEUS include glacio‐isostatic adjustment, ridge push effects, local stresses along preexisting fracture zones, and large‐scale convection. In this paper, we present a self‐consistent model of the dynamics of CEUS that explains the stress field responsible for these intraplate earthquakes. The earthquakes represent slow, ongoing deformation associated with forces arising from a combination of lithosphere topography and structure, together with the effects of density‐driven mantle flow. Using GPS data, we calculate strain rates that are likely to arise from tectonic effects and conclude that intraplate strain rates associated with tectonic effects are unlikely to exceed 1 × 10−9 year−1. We test several models of lateral viscosity variations by comparing model stress orientation output with earthquake moment tensors,directions from stress inversion, andPaxes of earthquakes. A model that satisfies stress and earthquake constraints and also strain rate magnitude constraints requires high viscosity (1025 Pa·s) craton and old oceanic lithosphere of the western Atlantic block and weaker (5 × 1024 Pa·s) accreted Appalachian terrane. Other strength contrasts within the lithosphere are likely present. Incorporation of these into future models using constraints from seismology, along with refined geodetic measurements and improved estimates of crust and upper mantle densities, is needed to further refine long‐term dynamic models and better evaluate the hazards associated with this very slow, ongoing permanent deformation within the eastern and central United States.

    more » « less
  5. Abstract

    The Hawaiian Ridge has long been a focus site for studying lithospheric flexure due to intraplate volcano loading, but crucial load and flexure details remain unclear. We address this problem using wide‐angle seismic refraction and reflection data acquired along a ∼535‐km‐long profile that intersects the ridge between the islands of Maui and Hawai'i and crosses 80–95 Myr‐old lithosphere. A tomographic image constructed using travel time data of several seismic phases reveals broad flexure of Pacific oceanic crust extending up to ∼200–250 km either side of the Hawaiian Ridge, and vertically up to ∼6–7 km. TheP‐wave velocity structure, verified by gravity modeling, reveals that the west flank of Hawaii is comprised of extrusive lavas overlain by volcanoclastic sediments and a carbonate platform. In contrast, the Hāna Ridge, southeast of Maui, contains a high‐velocity core consistent with mafic or ultramafic intrusive rocks. Magmatic underplating along the seismic line is not evident. Reflectors at the top and bottom of the pre‐existing oceanic crust suggest a ∼4.5–6 km crustal thickness. Simple three‐dimensional flexure modeling with an elastic plate thickness,Te, of 26.7 km shows that the depths to the reflectors beneath the western flank of Hawai'i can be explained by volcano loading in which Maui and the older islands in the ridge contribute ∼43% to the flexure and the island of Hawai'i ∼51%. Previous studies, however, revealed a higherTebeneath the eastern flank of Hawai'i suggesting that isostatic compensation may not yet be complete at the youngest end of the ridge.

    more » « less