skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Stretchable, Transparent, Permeation Barrier Layer for Flexible Optics
Abstract Flexible, compliant permeation barrier layers are critically needed in the optics/optoelectronics industry to protect deformable, polymer‐based optical elements, such as those found in variable focus lenses. To address these needs, a transparent and deformable polymeric permeation barrier coating consisting of poly(1H,1H,6H,6H‐perfluorohexyl diacrylate) (pPFHDA) is prepared by initiated chemical vapor deposition. pPFHDA is a highly crosslinked fluoropolymer, which is deposited onto temperature‐sensitive elastomeric membranes at ambient temperature with high uniformity and conformality. This is believed to be the first demonstration of vapor deposition of the PFHDA monomer. Coatings with thicknesses nominally ranging from 200 to 750 nm are prepared and shown to be impermeable to high‐index optical fluid (polyphenyl thioether) over 2 months at 70 °C, which translates to more than 4 year lifespan at room temperature, even after being subjected to 0.26% biaxial strain. Moreover, due to its amorphous nature, the pPFHDA is transparent from wavelengths of 300–1690 nm and also thermally stable to temperatures of 300 °C. These properties should make pPFHDA coating a particularly compelling candidate for flexible optical/optoelectronic devices requiring transparent and compliant barrier layers.  more » « less
Award ID(s):
1845805 1827904
PAR ID:
10450764
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Optical Materials
Volume:
9
Issue:
12
ISSN:
2195-1071
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Journal of Materials Chemistry C)
    Flexible optics and optoelectronic devices require stretchable and compliant antireflection coatings (ARC). Conventional optical coatings, typically inorganic thin films, are brittle and crack under strain, while porous or patterned surfaces often lack environmental endurance and/or involve complex processing. Polymeric optical thin films prepared by initiated chemical vapor deposition (iCVD) comprise a promising alternative class of materials. With iCVD, multilayered, uniform thin film coatings can be synthesized conformally on the surface of a temperature-sensitive substrate near room temperature with precise compositional and thickness control. In this study, a model two-layer coating design consisting of poly(1 H ,1 H ,6 H ,6 H -perfluorohexyl diacrylate) (pPFHDA) with a refractive index at 633 nm of n 633 = 1.426 was deposited atop poly(4-vinylpyridine) (p4VP, n 633 = 1.587). Broadband antireflection over the visible wavelength range (400–750 nm) was conferred to a transparent, flexible thermoplastic polyurethane (TPU) substrate ( n 633 ∼ 1.51), reducing the front-surface reflectance from ∼4% to ∼2%. The superior mechanical compliance of polymer ARCs over conventional inorganic coatings (MgF 2 , SiO 2 , and Al 2 O 3 ) on the TPU substrate was thoroughly investigated by monitoring the evolution of film morphology and tensile fracture with applied equibiaxial strain. The polymer ARC withstood at least ε = 1.64% equibiaxial strain without fracture, while all inorganic coatings cracked. Through a repeated application of strain over hundreds of cycles, the antireflection by the polymer film was shown to possess excellent stability and fatigue resilience. Finally, simulations of established iCVD polymer chemistries possessing larger index contrast revealed that reflectance can be further reduced to <1% or better. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, Nature Communications)
    Abstract Two-dimensional carbides and nitrides, known as MXenes, are promising for water-processable coatings due to their excellent electrical, thermal, and optical properties. However, depositing hydrophilic MXene nanosheets onto inert or hydrophobic polymer surfaces requires plasma treatment or chemical modification. This study demonstrates a universal salt-assisted assembly method that produces ultra-thin, uniform MXene coatings with exceptional mechanical stability and washability on various polymers, including high-performance polymers for extreme temperatures. The salt in the Ti3C2Txcolloidal suspension reduces surface charges, enabling electrostatically hydrophobized MXene deposition on polymers. A library of salts was used to optimize assembly kinetics and coating morphology. A 170 nm MXene coating can reduce radiation temperature by ~200 °C on a 300 °C PEEK substrate, while the coating on Kevlar fabric provides comfort in extreme conditions, including outer space and polar regions. 
    more » « less
  3. ; ; ; ; ; ; ; ; (, Applied Physics Letters)
    Thin Si-doped Al-rich (xAl > 0.85) regrown Al(Ga)N layers were deposited on AlN on sapphire template using metal-organic chemical vapor deposition (MOCVD) techniques. The optimization of the deposition conditions, such as temperature (1150 °C), V/III ratio (750), deposition rate (0.7 Å/s), and Si concentration (6 × 10^19/cm3), resulted in a high charge carrier concentration (> 10^15 cm−3) in the Si-doped Al-rich Al(Ga)N films. A pulsed deposition condition with pulsed triethylgallium and a continuous flow of trimethylaluminum and ammonia was employed to achieve a controllable Al composition xAl > 0.95 and to prevent unintended Ga incorporation in the AlGaN material deposited using the close-coupled showerhead reactor. Also, the effect of unintentional Si incorporation on free charge carrier concentration at the regrowth interface was studied by varying the thickness of the regrown Al(Ga)N layer from 65 to < 300 nm. A maximum charge carrier concentration of 4.8 × 10^16 and 7.5 × 10^15/cm3 was achieved for Al0.97Ga0.03N and AlN films with thickness <300 nm compared to previously reported n-Al(Ga)N films with thickness ≥400 nm deposited using MOCVD technique. 
    more » « less
  4. ; ; ; ; ; (, Advanced Functional Materials)
    Abstract Room‐temperature solution‐processed flexible photodetectors with spectral response from 300 to 2600 nm are reported. Solution‐processed polymeric thin film with transparency ranging from 300 to 7000 nm and superior electrical conductivity as the transparent electrode is reported. Solution‐processed flexible broadband photodetectors with a “vertical” device structure incorporating a perovskite/PbSe quantum dot bilayer thin film based on the above solution‐processed transparent polymeric electrode are demonstrated. The utilization of perovskite/PbSe quantum dot bilayer thin film as the photoactive layer extends spectral response to infrared region and boosts photocurrent densities in both visible and infrared regions through the trap‐assisted photomultiplication effect. Operated at room temperature and under an external bias of ‐1 V, the solution‐processed flexible photodetectors exhibit over 230 mA W‐1responsivity, over 1011 cm Hz1/2/W photodetectivity from 300 to 2600 nm and ≈70 dB linear dynamic ranges. It is also found that the solution‐processed flexible broadband photodetectors exhibit fast response time and excellent flexibility. All these results demonstrate that this work develop a facile approach to realize room‐temperature operated ultrasensitive solution‐processed flexible broadband photodetectors with “vertical” device structure through solution‐processed transparent polymeric electrode. 
    more » « less
  5. ; ; ; ; (, Journal of the American Chemical Society)
    Atomic layer deposition (ALD) is a technologically important method to grow thin films with high conformality and excellent thickness control from vapor phase precursors. The development of new thermal ALD processes can be limited by precursor reactivity and stability: reaction temperature and precursor design are among the few variables available to achieve higher reactivity, unlike in solution synthesis where the use of solvent and/or a catalyst can promote a desired reaction. To bridge this synthesis gap between vapor and solution, we demonstrate the use of an ultrathin coating layer of a vapor-phase compatible solvent—an ionic liquid (IL)— onto our growth substrate to perform ALD of SnO. Successful SnO deposition is achieved using tin acetylacetonate and water, a process that otherwise would require a stronger counter-reactant such as ozone. The layer of IL allows a solvent-mediated reaction mechanism to take place on the growth substrate. We report a growth per cycle of 0.67 Å/cycle at a deposition temperature of 100 °C in an IL comprised of 1-ethyl-3-methylimidazolium hydrogen sulfate. Characterization of the ALD films confirms the SnO film composition, and 1H and 13C NMR are used to probe the solvent-mediated ALD reaction, suggesting a solvent-mediated addition-elimination type mechanism forming acetone and acetate. Density functional theory calculations show that the ionic liquid solvent is beneficial to the proposed solvent-mediated mechanism by lowering the C-C bond cleavage energetics of acetylacetonate compared to the vapor phase. A general class of ligand-modification reactions for thermal ALD is thus introduced in this work. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email