skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: A Bioresorbable Magnetically Coupled System for Low‐Frequency Wireless Power Transfer
Abstract Bioresorbable electronic technologies form the basis for classes of biomedical devices that undergo complete physical and chemical dissolution after a predefined operational period, thereby eliminating the costs and risks associated with secondary surgical extraction. A continuing area of opportunity is in the development of strategies for power supply for these systems, where previous studies demonstrate some utility for biodegradable batteries, radio frequency harvesters, solar cells, and others. This paper introduces a type of bioresorbable system for wireless power transfer, in which a rotating magnet serves as the transmitter and a bioresorbable antenna as the remote receiver, with capabilities for operation at low frequencies (<200 Hz). Systematic experimental and numerical studies demonstrate several unique advantages of this system, most significantly the elimination of impedance matching and electromagnetic radiation exposure presented with the types of radio frequency energy harvesters explored previously. These results add to the portfolio of power supply options in bioresorbable electronic implants.  more » « less
Award ID(s):
1635443
PAR ID:
10453855
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Functional Materials
Volume:
29
Issue:
46
ISSN:
1616-301X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, SPIE Defense + Commercial Sensing)
    Dutta, Achyut K.; Balaya, Palani; Xu, Sheng (Ed.)
    Monitoring human health in real-time using wearable and implantable electronics (WIE) has become one of the most promising and rapidly growing technologies in the healthcare industry. In general, these electronics are powered by batteries that require periodic replacement and maintenance over their lifetime. To prolong the operation of these electronics, they should have zero post-installation maintenance. On this front, various energy harvesting technologies to generate electrical energy from ambient energy sources have been researched. Many energy harvesters currently available are limited by their power output and energy densities. With the miniaturization of wearable and implantable electronics, the size of the harvesters must be miniaturized accordingly in order to increase the energy density of the harvesters. Additionally, many of the energy harvesters also suffer from limited operational parameters such as resonance frequency and variable input signals. In this work, low frequency motion energy harvesting based on reverse electrowetting-ondielectric (REWOD) is examined using perforated high surface area electrodes with 38 µm pore diameters. Total available surface area per planar area was 8.36 cm2 showing a significant surface area enhancement from planar to porous electrodes and proportional increase in AC voltage density from our previous work. In REWOD energy harvesting, high surface area electrodes significantly increase the capacitance and hence the power density. An AC peak-to-peak voltage generation from the electrode in the range from 1.57-3.32 V for the given frequency range of 1-5 Hz with 0.5 Hz step is demonstrated. In addition, the unconditioned power generated from the harvester is converted to a DC power using a commercial off-theshelf Schottky diode-based voltage multiplier and low dropout regulator (LDO) such that the sensors that use this technology could be fully self-powered. The produced charge is then converted to a proportional voltage by using a commercial charge amplifier to record the features of the motion activities. A transceiver radio is also used to transmit the digitized data from the amplifier and the built-in analog-to-digital converter (ADC) in the micro-controller. This paper proposes the energy harvester acting as a self-powered motion sensor for different physical activities for wearable and wireless healthcare devices. 
    more » « less
  2. ; (, ASME International Mechanical Engineering Congress and Exposition)
    Creating self-sustaining wireless sensor networks to power the Internet of Things requires universal energy harvesting systems. MEMS energy harvesters are in particular demand as they can be batch fabricated to meet the large supply demands. However, currently silicon MEMS kinetic energy harvesters are fabricated with a narrow bandwidth of 1–2 Hz, so each application requires a custom designed device which limits the advantages of batch fabrication. This paper investigates the development of a passive tuning MEMS vibration energy harvesting method that is based on distributing the load to various locations along the proof mass using a liquid load. A 3D printed proof mass with an array of cavities was developed, where each cavity could be filled with liquid to alter the resonant frequency as desired. Cavities were filled with silicone oil to validate the concept. The results illustrate tuning of the frequency with a resolution of < 1 Hz and a range of approximately 50 Hz. This method represents a passive tuning method as no power is required and the tuning can be accomplished during manufacturing so that one single universal energy harvester could be made and then tuned to meet the end user’s frequency specification. 
    more » « less
  3. ; (, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences)
    Vibration energy is becoming a significant alternative solution for energy generation. Recently, a great deal of research has been conducted on how to harvest energy from vibration sources ranging from ocean waves to human motion to microsystems. In this paper, a theoretical model of a piecewise-linear (PWL) nonlinear vibration harvester that has potential applications in variety of fields is proposed and numerically investigated. This new technique enables automatic frequency tunability in the energy harvester by controlling the gap size in the PWL oscillator so that it is able to adapt to changes in excitations. To optimize the performance of the proposed system, a control method combining the response prediction, signal measurement and gap adjustment mechanism is proposed in this paper. This new energy harvester not only overcomes the limitation of traditional linear energy harvesters that can only provide the maximum power generation efficiency over a narrow frequency range but also improves the performance of current nonlinear energy harvesters that are not as efficient as linear energy harvesters at resonance. The proposed system is demonstrated in several case studies to illustrate its effectiveness for a number of different excitations. 
    more » « less
  4. ; ; ; ; ; (, Advanced Functional Materials)
    Abstract For piezoelectric energy harvesters, a large volume of piezoelectric material with a high figure of merit is essential to obtain a higher power density. The work describes the growth of highly (001) oriented sputtered lead zirconate titanate (PZT) films (f≈ 0.99) exceeding 4 µm in thickness on both sides of an Ni foil to produce a bimorph structure. These films are incorporated in novel wrist‐worn energy harvesters (<16 cm2) in which piezoelectric beams are plucked magnetically using an eccentric rotor with embedded magnets to implement frequency up‐conversion. The resulting devices successfully convert low‐frequency vibration sources (i.e., from walking, rotating the wrist, and jogging) to higher frequency vibrations of the PZT beams (100–200 Hz). Measured at resonance, six beams producing an output of 1.2 mW is achieved at 0.15 G acceleration. For magnetic plucking of a wrist‐worn nonresonant device, 40–50 µW is produced during mild activity. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Nature Communications)
    null (Ed.)
    Abstract Bioresorbable electronic stimulators are of rapidly growing interest as unusual therapeutic platforms, i.e., bioelectronic medicines, for treating disease states, accelerating wound healing processes and eliminating infections. Here, we present advanced materials that support operation in these systems over clinically relevant timeframes, ultimately bioresorbing harmlessly to benign products without residues, to eliminate the need for surgical extraction. Our findings overcome key challenges of bioresorbable electronic devices by realizing lifetimes that match clinical needs. The devices exploit a bioresorbable dynamic covalent polymer that facilitates tight bonding to itself and other surfaces, as a soft, elastic substrate and encapsulation coating for wireless electronic components. We describe the underlying features and chemical design considerations for this polymer, and the biocompatibility of its constituent materials. In devices with optimized, wireless designs, these polymers enable stable, long-lived operation as distal stimulators in a rat model of peripheral nerve injuries, thereby demonstrating the potential of programmable long-term electrical stimulation for maintaining muscle receptivity and enhancing functional recovery. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email