skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: Vp / Vs Ratio of Incoming Sediments Off Cascadia Subduction Zone From Analysis of Controlled‐Source Multicomponent OBS Records
Abstract P‐to‐S‐converted waves observed in controlled‐source multicomponent ocean bottom seismometer (OBS) records were used to derive theVp/Vsstructure of Cascadia Basin sediments. We usedP‐to‐Swaves converted at the basement to derive an empirical function describing the averageVp/Vsof Cascadia sediments as a function of sediment thickness. We derived one‐dimensional intervalVp/Vsfunctions from semblance velocity analysis ofS‐converted intrasediment and basement reflections, which we used to define an empiricalVp/Vsversus burial depth compaction trend. We find that seaward from the Cascadia deformation front,Vp/Vsstructure offshore northern Oregon and Washington shows little variability along strike, while the structure of incoming sediments offshore central Oregon is more heterogeneous and includes intermediate‐to‐deep sediment layers of anomalously elevatedVp/Vs. These zones with elevatedVp/Vsare likely due to elevated pore fluid pressures, although layers of high sand content intercalated within a more clayey sedimentary sequence, and/or a higher content of coarser‐grained clay minerals relative to finer‐grained smectite could be contributing factors. We find that the proto‐décollement offshore central Oregon develops within the incoming sediments at a low‐permeability boundary that traps fluids in a stratigraphic level where fluid overpressure exceeds 50% of the differential pressure between the hydrostatic pressure and the lithostatic pressure. Incoming sediments with the highest estimated fluid overpressures occur offshore central Oregon where deformation of the accretionary prism is seaward vergent. Conversely, landward vergence offshore northern Oregon and Washington correlates with more moderate pore pressures and laterally homogeneousVp/Vsfunctions of Cascadia Basin sediments.  more » « less
Award ID(s):
1657737
PAR ID:
10454609
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  
Publisher / Repository:
DOI PREFIX: 10.1029
Date Published:
Journal Name:
Journal of Geophysical Research: Solid Earth
Volume:
125
Issue:
6
ISSN:
2169-9313
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract Oceanic plate seamounts are believed to play an important role in megathrust rupture at subduction zones, although consistent relationships between subducting seamounts and plate interface seismicity patterns are not found. While most studies focus on impacts linked to their topography, seamounts are also sites of heterogeneity in incoming plate sediments that may contribute to megathrust properties. Here, we characterize incoming plate sediments along the Cascadia subduction zone using new high‐resolution seismic images and compressional wave (Vp) models from the CASIE21 multi‐channel‐seismic experiment. Nine fully‐to‐partially buried seamounts are identified seaward of the deformation front within a region of thick Plio‐Pleistocene sediment where the Juan de Fuca plate is bending into the subduction zone. Anomalously highVpsediment blankets two seamounts offshore Washington‐Central Oregon, with wavespeeds reaching 36% and 20% higher than adjacent sediment. Fluid seepage and temperatures warm enough for smectite diagenesis extending to shallow depths are inferred from heat flow studies and we attributeVpanomalies to sediment cementation linked primarily to smectite dehydration. Signatures of fluid seepage above seamounts are also identified offshore Vancouver Island, but anomalously lowVpsediment below distinct reverse polarity reflections are found, indicating trapped fluids, and cooler basement temperatures are inferred. Landward of one seamount, a zone of enhanced sediment compaction is found, consistent with the predicted stress modulating effects of seamount subduction. These new findings of variations in sediment diagenesis and strength around seamounts prior to subduction may contribute to the diverse megathrust frictional properties and seismicity patterns evident at subducting seamounts. 
    more » « less
  2. Abstract We use heat flux measurements colocated with seismic reflection profiles over a buried basement high on the Juan de Fuca plate ∼25 km seaward of the deformation front offshore Oregon to test for the presence of hydrothermal circulation in the oceanic crust. We also revisit heat flux data crossing a buried basement high ∼25 km seaward of the deformation front ∼150 km north, offshore Washington. Seafloor heat flux is inversely correlated with sediment thickness, consistent with vigorous hydrothermal circulation in the basement aquifer homogenizing temperatures at the top of the basement. Heat flux immediately above the summit of the basement highs is greater than expected solely from conduction. Fluid seepage at rates of ∼2.6–5.4 cm yr−1in a 1–1.5 km‐wide conduit through ∼800–1,300 m thick sediment sections above these basement highs can explain these observations. Observations of thermally significant fluid seepage through sediment >225 m thick on oceanic crust are unprecedented. High sediment permeability, high fluid overpressure in the basement, or a combination of both is required to drive fluid seepage at the observed rates. We infer that rapid seepage occurs because the basement highs rise above the low permeability basal sediment with their tops protruding into the base of high permeability Nitinat or Astoria Fan sediment. Seepage from basement highs penetrating into the submarine fans can affect the thermal state of crust entering the subduction zone. 
    more » « less
  3. Abstract Vigorous hydrothermal circulation in the basement aquifer of the oceanic crust homogenizes temperatures within the aquifer and generates fluid overpressures at the tops of buried basement highs. At a site ∼25 km seaward of the Cascadia subduction zone deformation front, fluid overpressure at the top of the buried MARGIN seamount drives vertical fluid seepage through sediment overlying the seamount and results in anomalously high heat flux at the seafloor. In this study, we use numerical models of coupled heat and fluid transport to investigate the sensitivity of fluid overpressures to sediment thickness and basement relief for a 2D buried basement ridge. For ∼8 Ma oceanic crust buried by low permeability sediment, we find that the overpressure at the summit of a basement ridge increases by ∼0.10 kPa per meter of burial depth and by ∼0.71 kPa per meter of basement relief. For a 3D system with a geometry similar to the MARGIN seamount buried by low permeability sediment, the modeled fluid overpressure at the top of the seamount is ∼996 kPa. However, the Astoria Fan sediment above the MARGIN seamount likely has relatively high permeability, permitting rapid vertical seepage, thereby reducing fluid overpressure maintained at the top of the seamount. An overpressure of 492 kPa at the summit of the buried seamount at the MARGIN site and a bulk permeability of the Astoria Fan sediments of 4 × 10−15 m2are consistent with the seepage rate of 5.4 cm yr−1estimated from the elevated heat flux. 
    more » « less
  4. Abstract Geological processes at subduction zones and their associated geohazards (e.g., megathrust earthquakes, submarine landslides, tsunamis, and arc volcanism) are, to a large extent, controlled by the structure, physical properties and fluid content of the subducting plate, the accreted sediments, and the overriding plate. In these settings, modern seismic modeling and imaging techniques based on controlled-source, multicomponent ocean-bottom seismometer (OBS) data are some of the best tools available for determining the subseafloor elastic properties, which can be linked to the aforementioned properties. Here, we present CASIE21-OBS, a controlled-source marine wide-angle OBS data set recently collected across the Cascadia convergent margin as part of the larger CAscadia Seismic Imaging Experiment 2021 (CASIE21). The main component of CASIE21 is a long-offset multichannel seismic (MCS) survey of the Cascadia margin conducted in June–July 2021 onboard R/V M.G. Langseth (cruise MGL2104) aiming to characterize the incoming plate, the plate interface geometry and properties, and the overlying sediment stratigraphy and physical properties. CASIE21-OBS was conducted during R/V M.G. Langseth cruise MGL2103 (May 2021) and R/V Oceanus cruise OC2106A (June–July 2021). It consisted of 63 short-period four-component OBSs deployed at a total 120 stations along 10 across-trench profiles extending from ∼50 km seaward of the deformation front to the continental shelf, and from offshore northern Vancouver Island to offshore southern Oregon. The OBSs recorded the airgun signals of the CASIE21-MCS survey as well as natural seismicity occurring during the deployment period (24 May 2021 19:00 UTC–9 July 2021 09:00 UTC). The OBS data are archived and available at the Incorporated Research Institutions for Seismology Data Management Center under network code YR_2021 for continuous time series (miniSEED) and identifier 21-008 for assembled data set (SEG-Y). 
    more » « less
  5. Abstract Accurately determining the seismic structure of the continental deep crust is crucial for understanding its geological evolution and continental dynamics in general. However, traditional tools such as surface waves often face challenges in solving the trade‐offs between elastic parameters and discontinuities. In this work, we present a new approach that combines two established inversion techniques, receiver function H‐κstacking and joint inversion of surface wave dispersion and receiver function waveforms, within a Bayesian Monte Carlo (MC) framework to address these challenges. Demonstrated by synthetic tests, the new method greatly reduces trade‐offs between critical parameters, such as the deep crustal Vs, Moho depth, and crustal Vp/Vs ratio. This eliminates the need for assumptions regarding crustal Vp/Vs ratios in joint inversion, leading to a more accurate outcome. Furthermore, it improves the precision of the upper mantle velocity structure by reducing its trade‐off with Moho depth. Additional notes on the sources of bias in the results are also included. Application of the new approach to USArray stations in the Northwestern US reveals consistency with previous studies and identifies new features. Notably, we find elevated Vp/Vs ratios in the crystalline crust of regions such as coastal Oregon, suggesting potential mafic composition or fluid presence. Shallower Moho depth in the Basin and Range indicates reduced crustal support to the elevation. The uppermost mantle Vs, averaging 5 km below Moho, aligns well with the Pn‐derived Moho temperature variations, offering the potential of using Vs as an additional constraint to Moho temperature and crustal thermal properties. 
    more » « less