Copper‐catalyzed azide‐alkyne cycloaddition polymerization (CuAACP) of AB2monomers demonstrated a chain‐growth mechanism without any external ligand because of the complexation of
This article reports a chain‐growth coupling polymerization of AB difunctional monomer via copper‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction for synthesis of star polymers. Unlike our previously reported CuAAC polymerization of AB
- NSF-PAR ID:
- 10457835
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Journal of Polymer Science
- Volume:
- 58
- Issue:
- 1
- ISSN:
- 2642-4150
- Page Range / eLocation ID:
- p. 84-90
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
ABSTRACT in situ formed triazole groups with Cu catalysts. In this study, we explored the use of various ligands that affected the polymerization kinetics to tune the polymers’ molecular weights and the degree of branching (DB). Eight ligands were studied, including polyethylene glycol monomethyl ether (PEG350,M n= 350), tris(benzyltriazolylmethyl)amine (TBTA), 2,6‐bis(1‐undecyl‐1H‐benzo[d]imidazol‐2‐yl)pyridine (Py(DBim)2), 2,2′‐bipyridyl (bpy), 4,4′‐di‐n ‐nonyl‐2,2′‐bipyridine (dNbpy),N,N,N′,N″,N″ ‐pentamethyldiethylenetriamine (PMDETA),N,N,N′,N″,N″ ‐penta(n ‐butyl)diethylenetriamine (PBuDETA), andN,N,N′,N″,N″ ‐pentabenzyldiethylenetriamine (PBnDETA). All ligands except PEG350exhibited stronger coordination with Cu(I) than the polytriazole polymer, which freed the Cu catalyst from polymers and resulted in dominant step‐growth polymerization with simultaneous chain‐growth feature. Meanwhile, the use of PEG350ligand retained the confined Cu in the polymer, demonstrating a chain‐growth mechanism, but lower polymer molecular weights as compared with the no‐external‐ligand polymerization. Results indicated that aliphatic substituent groups on ligands had little effect on the molecular weights and DB of the polymers, but rigid aromatic substituent groups decreased both values. By varying the ligand species and amounts, hyperbranched polymers with DB value ranging from 0.53 ([TBTA]0/[Cu]0= 5) to 0.98 ([PMDETA]0/[Cu]0= 2) have been achieved. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem.2018 ,56 , 2238–2244 -
more » « less
Abstract Structurally defined hyperbranched polymers (HBPs) bearing multiple azido peripheral groups and alkene dangling groups are constructed using the authors' recently developed chain‐growth copper‐catalyzed azide‐alkyne cycloaddition polymerization (CuAACP) of an alkene‐containing AB2monomer. Sequential integration of CuAAC and photo‐initiated thiol–ene reactions proves highly efficient and chemo‐selective functionalization of polymers at different placements with quantitative yield of both reactive groups. A variety of HBPs carrying both surface and internal functionalities are then produced, achieving quantitative/ratiometric incorporations of guest molecules in most cases. To demonstrate possible conjugation with bioactive ingredients, well‐defined HBPs decorated with peripheral cysteine moieties are produced as an example, showing pH responsiveness in water.
-
more » « less
Pyrazinacenes are next generation N-heteroacenes and represent a novel class of stable n-type materials capable of accepting more than one electron and displaying intriguing features, including prototropism, halochromism, and redox chromism. Astonishingly, despite a century since their discovery, there have been no reports on the conjugated polymers of pyrazinacenes due to unknown substrate scope and lack of pyrazinacene monomers that are conducive to condensation polymerization. Breaking through these challenges, in this work, we report the synthesis of previously undiscovered and highly coveted conjugated polymers of pyrazinacenes. In order to understand the intricacies of conjugation extension within the acene and along the polymer backbone, a series of electronically diverse four pyrazinacene conjugated polymers were synthesized. Polymers synthesis required optimizing a few synthetic steps along the 12-step synthetic pathway. The generated pyrazinacene monomers are not amenable to the popular condensation polymerizations involving Pd or Cu catalysts. Gratifyingly, Pd and Cu free dehydrohalogenation polymerization of the monomer with HgCl2 resulted in high molecular weight organometallic conjugated pyrazinacene polymers within a few minutes at room temperature. The dual role played by the Hg(II) during the polymerization, combined with the self-coupling of the RHgCl (intermediate), is at the core of successful polymerization. Notably, the self-coupling of intermediates challenges the strict stoichiometric balance typically required for step-growth polymerization and offers a novel synthetic strategy to generate high molecular weight conjugated polymers even with imbalanced monomer stoichiometries. A combination of electrochemical studies and DFT-B3LYP simulations indicated that the presence of the reduced pyrazine ring promotes interacene p-conjugation through the metal center, in contrast to completely oxidized tetrazaazaanthracene. The extension of conjugation results in ca. 2 eV lower reduction potential for polymers compared to the monomer, placing the LUMO energy levels of these polymers on par with some of the best-known n-type polymers. Also, the presence of NH protons in the pyrazinacene polymers show ionochromism and red-shift UV-vis absorption maximum by ca. 100 nm. This work not only shows a way to realize highly desirable and elusive pyrazinacene conjugated polymers but also paves the way for a library of n-type conjugated polymers that can undergo multi-electron reduction.
-
more » « less
Abstract Heterocyclic hypervalent (HV) iodine(III) compounds with ICl bonds and various substituents at the N atom are synthesized and found to be very efficient chain transfer agents in the polymerization of styrene with transfer coefficients exceeding that of CCl4by 2–3 orders of magnitude, depending on the structure. The chain transfer rate coefficients are also determined. Due to the presence of thermally labile HV bonds, the compounds degrade homolytically upon heating and can initiate radical polymerization. For instance, 1‐chloro‐2‐hexyl‐1,2‐benziodazol‐3(2H)‐one, is used in the polymerization of styrene, which yields low molecular weight polymers with alkyl chloride groups at the α‐ (initiation) and the ω‐chain ends (transfer). Chain‐end functionalization reactions with azide and chain extension under low‐catalyst‐concentration atom transfer radical polymerization (ATRP) conditions of the prepared telechelic polymers are carried out. The same initiator/chain transfer agent is successfully employed in the synthesis of highly branched polymers with multiple alkyl chloride‐type chain ends when added to mixtures of styrene and 1,4‐divinylbenzene containing 10–80 mol% of the divinyl crosslinker, or even pure crosslinker. In all cases, soluble hyperbranched polymers are obtained up to moderate monomer conversions. The effects of crosslinker and HV iodine(III) compound concentrations on the polymerization outcome are studied systematically.
-
more » « less
ABSTRACT 1H NMR and SEC analyses are used to investigate the overall efficiency of Copper Catalyzed Azide Alkyne Cycloaddition (CuAAC) “click” coupling reactions between alkyne‐ and azide‐terminated polymers using polystyrene as a model. Quantitative convolution modeling of the entire molecular weight distribution is applied to characterize the outcomes of the functional polymer synthesis reactions (i.e., by atom transfer radical polymerization), as well as the CuAAC coupling reaction. Incomplete functionality of the azide‐terminated polystyrene (∼92%) proves to be the largest factor compromising the efficacy of the CuAAC coupling reaction and is attributed primarily to the loss of terminal bromide functionality during its synthesis. The efficiency of the SN2 reaction converting bromide to azide was found to be about 99%. After taking into account the influence of non‐functional polymer, we find that, under the reaction conditions used, the efficiency of the CuAAC coupling reaction determined from both techniques is about 94%. These inefficiencies compromise the fidelity and potential utility of CuAAC coupling reactions for the synthesis of hierarchically structured polymers. While CuAAC efficiency is expected to depend on the specific reaction conditions used, the framework described for determining reaction efficiency does provide a means for ultimately optimizing the reaction conditions for CuAAC coupling reactions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem.
2018 ,56 , 75–84
