skip to main content

Title: SKS Splitting Beneath Mount St. Helens: Constraints on Subslab Mantle Entrainment

Observations of seismic anisotropy can provide direct constraints on the character of mantle flow in subduction zones, critical for our broader understanding of subduction dynamics. Here we present over 750 new SKS splitting measurements in the vicinity of Mount St. Helens in the Cascadia subduction zone using a combination of stations from the iMUSH broadband array and Cascades Volcano Observatory network. This provides the highest density of splitting measurements yet available in Cascadia, acting as a focused “telescope” for seismic anisotropy in the subduction zone. We retrieve spatially consistent splitting parameters (mean fast directionΦ: 74°, mean delay time∂t: 1.0 s) with the azimuthal occurrence of nulls in agreement with the fast direction of splitting. When averaged across the array, a 90° periodicity in splitting parameters as a function of back azimuth is revealed, which has not been recovered previously with single‐station observations. The periodicity is characterized by a sawtooth pattern inΦwith a clearly defined 45° trend. We present new equations that reproduce this behavior based upon known systematic errors when calculating shear wave splitting from data with realistic seismic noise. The corrected results suggest a single layer of anisotropy with an ENE‐WSW fast axis parallel to the motion of the subducting Juan de Fuca plate; in agreement with predictions for entrained subslab mantle flow. The splitting pattern is consistent with that seen throughout Cascadia, suggesting that entrainment of the underlying asthenosphere with the subducting slab is coherent and widespread.

more » « less
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  
Publisher / Repository:
DOI PREFIX: 10.1029
Date Published:
Journal Name:
Geochemistry, Geophysics, Geosystems
Page Range / eLocation ID:
p. 4202-4217
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Shear‐wave splitting observations can provide insight into mantle flow, due to the link between the deformation of mantle rocks and their direction‐dependent seismic wave velocities. We identify anisotropy in the Cook Inlet segment of the Alaska subduction zone by analyzing splitting parameters of S waves from local intraslab earthquakes between 50 and 200 km depths, recorded from 2015–2017 and emphasizing stations from the Southern Alaska Lithosphere and Mantle Observation Network experiment. We classify 678 high‐quality local shear‐wave splitting observations into four regions, from northwest to southeast: (L1b) splitting measurements parallel to Pacific plate motion, (L1a) arc‐perpendicular splitting pattern, (L2) sharp transition to arc‐parallel splitting, and (L3) splitting parallel to Pacific plate motion. Forward modeling of splitting from various mantle fabrics shows that no one simple model fully explains the observed splitting patterns. An A‐type olivine fabric with fast direction dipping 45° to the northwest (300°)—aligned with the dipping slab—predicts fast directions that fit L1a observations well, but not L2. The inability of the forward model fabrics to fit all the observed splitting patterns suggests that the anisotropy variations are not due to variable ray angles, but require distinct differences in the anisotropy regime below the arc, forearc, and subducting plate.

    more » « less
  2. Abstract

    Shear‐wave splitting observations of SKS and SKKS phases have been used widely to map azimuthal anisotropy, as caused by the occurrence of olivine, to constrain the dominant directions of upper mantle deformation. While SK(K)S splitting measurements at individual seismic stations are often averaged before interpretation, it is useful to consider additional information, for example, based on the variation of splitting parameters with azimuth due to the non‐vertical incidence of core‐phases. These constraints in theory enable a differentiation between various types of olivine and may allow us to infer otherwise poorly known upper mantle parameters such as stress, temperature, and water content. In this study, we predict the azimuthal variation of splitting parameters for A‐, C‐, and E‐type olivine fabrics and match them with observations from the High Lava Plains, Northwestern Basin and Range, and Western Yellowstone Snake River Plain in the Pacific Northwest US. This helps to constrain the amount of water in the upper mantle in the back‐arc of the Cascadia subduction zone, known for its consistent E‐W oriented seismic anisotropy, and particularly large splitting delay times. Our investigation renders the C‐type olivine mechanism improbable for this location; A‐ and E‐type fabrics match the observations, although differentiating between them is difficult. However, the agreement of the amplitude of backazimuthal variation of the fast orientation, plus the potential to explain large splitting delay times, suggest the occurrence of E‐type olivine, and thus the likely presence of a moderately hydrated upper mantle beneath Cascadia's back‐arc.

    more » « less

    Iceland represents one of the most well-known examples of hotspot volcanism, but the details of how surface volcanism connects to geodynamic processes in the deep mantle remain poorly understood. Recent work has identified evidence for an ultra-low velocity zone in the lowermost mantle beneath Iceland and argued for a cylindrically symmetric upwelling at the base of a deep mantle plume. This scenario makes a specific prediction about flow and deformation in the lowermost mantle, which can potentially be tested with observations of seismic anisotropy. Here we present an investigation of seismic anisotropy in the lowermost mantle beneath Iceland, using differential shear wave splitting measurements of S–ScS and SKS–SKKS phases. We apply our techniques to waves propagating at multiple azimuths, with the goal of gaining good geographical and azimuthal coverage of the region. Practical limitations imposed by the suboptimal distribution of global seismicity at the relevant distance ranges resulted in a relatively small data set, particularly for S–ScS. Despite this, however, our measurements of ScS splitting due to lowermost mantle anisotropy clearly show a rotation of the fast splitting direction from nearly horizontal for two sets of paths that sample away from the low velocity region (implying VSH > VSV) to nearly vertical for a set of paths that sample directly beneath Iceland (implying VSV > VSH). We also find evidence for sporadic SKS–SKKS discrepancies beneath our study region; while the geographic distribution of discrepant pairs is scattered, those pairs that sample closest to the base of the Iceland plume tend to be discrepant. Our measurements do not uniquely constrain the pattern of mantle flow. However, we carried out simple ray-theoretical forward modelling for a suite of plausible anisotropy mechanisms, including those based on single-crystal elastic tensors, those obtained via effective medium modelling for partial melt scenarios, and those derived from global or regional models of flow and texture development in the deep mantle. These simplified models do not take into account details such as possible transitions in anisotropy mechanism or deformation regime, and test a simplified flow field (vertical flow beneath the plume and horizontal flow outside it) rather than more detailed flow scenarios. Nevertheless, our modelling results demonstrate that our ScS splitting observations are generally consistent with a flow scenario that invokes nearly vertical flow directly beneath the Iceland hotspot, with horizontal flow just outside this region.

    more » « less
  4. Abstract

    To systematically investigate seismic azimuthal anisotropy in the Sumatra subduction zone and probe mantle dynamics associated with the subduction of the Australian Plate beneath the Sunda Plate, a total of 169 pairs of teleseismic XKS (including PKS, SKKS, SKS) and 115 pairs of localSsplitting parameters are obtained using broadband seismic data recorded at ~70 stations. Additionally, crustal anisotropy in the overriding Sunda Plate is measured by analyzing the moveout ofP‐to‐Sconversions from the Moho using a sinusoidal function. Comparison between the three sets of anisotropy measurements obtained using shear waves with different depths of origin suggests that (1) the crust of the Sunda Plate is anisotropic with mostly trench‐parallel fast orientations and a mean splitting time of 0.28 ± 0.05 s; (2) the mantle wedge is azimuthally anisotropic with dominantly trench‐parallel fast orientations and splitting times ranging from 0.22 to 0.81 s, which generally increase with the focal depth; and (3) subslab anisotropy is mostly trench‐normal beneath the fore‐arc region with an averaged splitting time of 1.48 ± 0.06 s, and becomes trench‐parallel beneath the arc and back‐arc areas with a mean splitting time of 0.33 ± 0.04 s. The resulting lateral and vertical distributions of anisotropy obtained using splitting of three types of shear waves advocate the presence of an entrained subslab flow that is deflected by the mantle transition zone. The flow enters the mantle wedge through a slab window and flows horizontally parallel to the trench.

    more » « less
  5. Subduction of the very young (<15 Myr old) oceanic lithosphere of the Nazca plate in central to southern Colombia is observationally related to an unusually high and unusually variable amount of intermediate (>50 km) depth seismicity. From 2010 through 2019 89% of central and southern Colombia’s 11,466 intermediate depth events occurred between 3.5°N and 5.5°N, highlighting these unusual characteristics of the young slab. In addition, morphologic complexity and possible tears characterize the Nazca slab in Colombia and complicate mantle flow in the region. Prior SKS-phase shear-wave splitting results indicate sub-slab anisotropy is dominated by plate motion parallel-to-subparallel orientations in the region, suggesting the young slab has entrained a relatively thick portion of the sub-slab mantle. These observations suggest the subduction of young lithosphere has significant effects on both the overlying and underlying asthenosphere in the Colombia subduction zone. Here we use more than 10 years of data to calculate receiver functions for the Red Sismológica Nacional de Colombia’s network of broadband seismometers. These receiver functions allow us to tie these prior observations of the Colombia subduction zone to distinct, structural features of the slab. We find that the region of high seismicity corresponds to a low seismic velocity feature along the top of the subducting plate between 3.5°N and 5.5°N that is not present to the south. Moderately elevated P-wave velocity to S-wave velocity ratios are also observed within the slab in the north. This feature likely represents hydrated slab mantle and/or uneclogitized oceanic crust extending to a deeper depth in the north of the region which may provide fluids to drive slab seismicity. We further find evidence for a thick layer of material along the slab’s lithosphere-asthenosphere boundary characterized by spatially variable anisotropy. This feature likely represents entrained asthenosphere at the base of the plate sheared by both the overlying plate and complex flow related to proposed slab tears just north and south of the study region. These observations highlight how structural observations provide key contextual constraints on short-term (seismogenic) and long-term (anisotropic fabric) dynamic processes in the Colombia subduction zone. Plain-language Summary The Nazca oceanic plate is very young (<15 million years old) where it is pulled or subducted beneath the South America plate in central and southern Colombia. Earthquakes occurring in the subducted Nazca plate at depths greater than 50 km are nearly 9x more common in central Colombia than in southern Colombia. The subducted Nazca plate also has a complex shape in this region and may have been torn both in northern Colombia and to the south near the Colombia-Ecuador border. The slow flow of mantle rock beneath the subducted plate is believed to be affected by this and earlier studies have inferred this flow is mostly in the same direction as the subducting plate's motion. We have used 10+ years of data to calculate receiver functions, which can detect changes in the velocity of seismic waves at the top and bottom of the subducted plate to investigate these features. We found that the Nazca plate is either hydrated or has rocks with lower seismic velocities at its top in the central part of Colombia where earthquakes are common. We also find that a thick layer of mantle rock at the base of the subducted plate has been sheared. 
    more » « less