An official website of the United States government
Abstract Many organisms use flexible appendages for locomotion, feeding, and other functional behaviors. The efficacy of these behaviors is determined in large part by the fluid dynamics of the appendage interacting with its environment. For oscillating appendages at low Reynolds numbers, viscosity dominates over inertia, and appendage motion must be spatially asymmetric to generate net flow. At high Reynolds numbers, viscous forces are negligible and appendage motion is often also temporally asymmetric, with a fast power stroke and a slow recovery stroke; such temporal asymmetry does not affect the produced flow at low Reynolds numbers. At intermediate Reynolds numbers, both viscous and inertial forces play non-trivial roles—correspondingly, both spatial and temporal asymmetry can strongly affect overall propulsion. Here we perform experiments on three robotic paddles with different material flexibilities and geometries, allowing us to explore the effects of motion asymmetry (both spatial and temporal) on force production. We show how a flexible paddle’s time-varying shape throughout the beat cycle can reorient the direction of the produced force, generating both thrust and lift. We also evaluate the propulsive performance of the paddle by introducing a new quantity, which we term ‘integrated efficiency’. This new definition of propulsive efficiency can be used to directly evaluate an appendage’s performance independently from full-body swimming dynamics. Use of the integrated efficiency allows for accurate performance assessment, generalization, and comparison of oscillating appendages in both robotic devices and behaving organisms. Finally, we show that a curved flexible paddle generates thrust more efficiently than a straight paddle, and produces spatially asymmetric motion—thereby improving performance—without the need for complex actuation and controls, opening new avenues for bioinspired technology development.
more »
« less
Robotic swimming in curved space via geometric phase
Locomotion by shape changes or gas expulsion is assumed to require environmental interaction, due to conservation of momentum. However, as first noted in [J. Wisdom, Science 299, 1865-1869 (2003)] and later in [E. Guéron, Sci. Am . 301, 38-45 (2009)] and [J. Avron, O. Kenneth, New J. Phys , 8, 68 (2006)], the noncommutativity of translations permits translation without momentum exchange in either gravitationally curved spacetime or the curved surfaces encountered by locomotors in real-world environments. To realize this idea which remained unvalidated in experiments for almost 20 y, we show that a precision robophysical apparatus consisting of motors driven on curved tracks (and thereby confined to a spherical surface without a solid substrate) can self-propel without environmental momentum exchange. It produces shape changes comparable to the environment’s inverse curvatures and generates movement of 10 − 1 cm per gait. While this simple geometric effect predominates over short time, eventually the dissipative (frictional) and conservative forces, ubiquitous in real systems, couple to it to generate an emergent dynamics in which the swimming motion produces a force that is counter-balanced against residual gravitational forces. In this way, the robot both swims forward without momentum and becomes fixed in place with a finite momentum that can be released by ceasing the swimming motion. We envision that our work will be of use in a broad variety of contexts, such as active matter in curved space and robots navigating real-world environments with curved surfaces.
more »
« less
- Award ID(s):
- 1806833
- PAR ID:
- 10459156
- Date Published:
- Journal Name:
- Proceedings of the National Academy of Sciences
- Volume:
- 119
- Issue:
- 31
- ISSN:
- 0027-8424
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Negatively buoyant freely swimming crustaceans such as krill must generate downward momentum in order to maintain their position in the water column. These animals use a drag-based propulsion strategy, where pairs of closely spaced swimming limbs are oscillated rhythmically from the tail to head. Each pair is oscillated with a phase delay relative to the neighbouring pair, resulting in a metachronal wave travelling in the direction of animal motion. It remains unclear how oscillations of limbs in the horizontal plane can generate vertical momentum. Using particle image velocimetry measurements on a robotic model, we observed that metachronal paddling with non-zero phase lag created geometries of adjacent paddles that promote the formation of counter-rotating vortices. The interaction of these vortices resulted in generating large-scale angled downward jets. Increasing phase lag resulted in more vertical orientation of the jet, and phase lags in the range used by Antarctic krill produced the most total momentum. Synchronous paddling produced lower total momentum when compared with metachronal paddling. Lowering Reynolds number by an order of magnitude below the range of adult krill (250–1000) showed diminished downward propagation of the jet and lower vertical momentum. Our findings show that metachronal paddling is capable of producing flows that can generate both lift (vertical) and thrust (horizontal) forces needed for fast forward swimming and hovering.more » « less
-
The bodies of most swimming fishes are very flexible and deform due to both external fluid dynamic forces and internal musculoskeletal forces. If fluid forces change, the body motion will also change unless the fish senses the change and alters its muscle activity to compensate. Lampreys and other fishes have mechanosensory cells in their spinal cords that allow them to sense how their body is bending. We hypothesized that lampreys (Petromyzon marinus) actively regulate body curvature to maintaina fairly constant swimming waveform even as swimming speed and fluid dynamic forces change. To test this hypothesis, we measured the steady swimming kinematics of lampreys swimming in normal water, and water in which the viscosity was increased by 10 or 20 times by adding methylcellulose. Increasing the viscosity over this range increases the drag coefficient, potentially increasing fluid forces up to 40%. Previous computational results suggested that if lampreys did not compensate for these forces, the swimming speed would drop by about 52%, the amplitude would drop by 39%, and posterior body curvature would increase by about 31% , while tail beat frequency would remain the same. Five juvenile sea lampreys were filmed swimming through still water, and midlines were digitized using standard techniques. Although swimming speed dropped by 44% from 1× to 10× viscosity, amplitude only decreased by 4% , and curvature increased by 7%, a much smaller change than the amount we estimated if there was no compensation. To examine the waveform overall, we performed a complex orthogonal decomposition and found that the first mode of the swimming waveform (the primary swimming pattern) did not change substantially, even at 20× viscosity. Thus, it appears that lampreys are compensating, at least partially, for the changes in viscosity, which in turn suggests that sensory feedback is involved in regulating the body waveform.more » « less
-
The trend toward smaller mechanism footprints and volumes, while maintaining the ability to perform complex tasks, presents the opportunity for exploration of hypercompact mechanical systems integrated with curved surfaces. Developable surfaces are shapes that a flat sheet can take without tearing or stretching, and they represent a wide range of manufactured surfaces. This work introduces “developable mechanisms” as devices that emerge from or conform to developable surfaces. They are made possible by aligning hinge axes with developable surface ruling lines to enable mobility. Because rigid-link motion depends on the relative orientation of hinge axes and not link geometry, links can take the shape of the corresponding developable surface. Mechanisms are classified by their associated surface type, and these relationships are defined and demonstrated by example. Developable mechanisms show promise for meeting unfilled needs using systems not previously envisioned.more » « less
-
Swimming at low Reynolds number is typically dominated by a large viscous drag, therefore microscale swimmers require non-reciprocal body deformation to generate locomotion. Purcell described a simple mechanical swimmer at the microscale consisting of three rigid components connected together with two hinges. Here we present a simple microswimmer consisting of two rigid paramagnetic particles with different sizes. When placed in an eccentric magnetic field, this simple microswimmer exhibits non-reciprocal body motion and its swimming locomotion can be directed in a controllable manner. Additional components can be added to create a multibody microswimmer, whereby the particles act cooperatively and translate in a given direction. For some multibody swimmers, the stochastic thermal forces fragment the arm, which therefore modifies the swimming strokes and changes the locomotive speed. This work offers insight into directing the motion of active systems with novel time-varying magnetic fields. It also reveals that Brownian motion not only affects the locomotion of reciprocal swimmers that are subject to the Scallop theorem, but also affects that of non-reciprocal swimmers.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1073/pnas.2200924119
