An official website of the United States government
This dataset contains grain size records from three Integrated Ocean Drilling Program core sites (U1345, U1343, and U1339) in the Bering Sea. These records are used to determine the effectiveness of different grain size parameters as proxies for sediment transport, current strength, and primary productivity in the Bering Sea during a past warm interval (Marine Isotope Stage 11, 424-374 thousand years ago (ka)). Grain size is measured using a laser diffraction particle size analyzer (Malvern Mastersizer 3000), and is reported for bulk sediments, and for the terrigenous fraction only. The raw dataset provided by the Malvern software includes the volume % of grains in 109 bin sizes, as well as the 10th (Dx10), 50th (Dx50) and 90th (Dx90) percentiles. We also provide the volume distribution of grains in the following size fractions: clay (less than 2 micrometers (μm)); silt (2-63 μm); sand (63-2000 μm); gravel (greater than 2000 μm); ice-rafted debris (greater than 150 μm; greater than 250 μm), and sortable silt (10-63 μm). Additional grain size parameters, including mean size, sorting and skewness, are calculated in GRADISTAT.
more »
« less
Particle Size Specific Magnetic Properties Across the Norwegian‐Greenland Seas: Insights Into the Influence of Sediment Source and Texture on Bulk Magnetic Records
Abstract We make fundamental observations of the particle size variability of magnetic properties from 71 core tops that span the southern Greenland and Norwegian Seas. These data provide the first detailed regional characterization of how bulk magnetic properties vary with sediment texture, sediment source, and sediment transport. Magnetic susceptibility (MS) and hysteresis parameters were measured on the bulk sediment and the five constituent sediment particle size fractions (clay, fine silt, medium silt, coarse silt, and sand). The median MS value of the medium silt size fraction is ~3–5 times higher than that of the sand and clay size fractions and results in a strong sensitivity of bulk MS to sediment texture. Hysteresis properties of the clay size fraction are relatively homogeneous and contrast that silt and sand size fractions which show regional differences across the study area. These coarser fractions are more transport limited and using medium silt hysteresis measurements and low temperature MS behavior we establish three endmembers that effectively explain the variability observed across the region. We model the response of bulk magnetic properties to changes in sediment texture and suggest that variations in sediment source are required to explain the bulk magnetic property variability observed in cores across the southern Greenland and Norwegian Seas. These findings imply that sediment source has a greater influence on driving bulk magnetic property variability across this region than has previously been assumed.
more »
« less
- Award ID(s):
- 1636381
- PAR ID:
- 10461268
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Geochemistry, Geophysics, Geosystems
- Volume:
- 20
- Issue:
- 2
- ISSN:
- 1525-2027
- Page Range / eLocation ID:
- p. 1004-1025
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Considerable research describes the interactions between seagrasses and their sedimentary environment, but there is little information on how populations differ in their innate versus plastic responses to these differences. Here, we test whether sediment contributes to eelgrass population differentiation and the nature of plastic responses to different sediment environments. We do this via a 15-week, fully crossed common garden experiment with two populations and their native sediment types. Plants from the warmer-temperature, clay-dominated site (90% silt + clay, 10% sand) consistently maintained greater biomass than plants from the cooler, sand-dominated site (60% sand, 40% silt + clay). Plants from both populations were highly plastic for root length and clonal shoot size, with both increasing when planted in clay-dominated compared to sand-dominated sediment. Plants from the clay-dominated site grew longer rhizomes in foreign sediment while plants from the sand-dominated site had no change in this plant trait, indicating some measure of home site advantage with respect to sediment conditions. Porewater sulfide also exhibited this pattern where concentrations were very low in clay-dominated sediment for all plants, but in the sand-dominated treatment, only plants native to sand-dominated sediment maintained porewater sulfide concentrations below toxic levels. These patterns may be mediated by microbiome differences between populations as roots from plants native to clay-dominated sediment had more fixed microbiomes between treatments compared to plants native to sand-dominated sediment. These results support that sediment type partially mediates home site advantage in eelgrass populations and suggest differential population responses may be mediated by the associated microbiome.more » « less
-
Grain size analysis is an essential tool for classifying sedimentary environments. The main aim of the current research is to use granulometric analysis of the Bhikiysain palaeolake sequence along the Ramganga river to describe changes in the depositional environment within the lake during the late Quaternary. The granulometric analysis was conducted using a laser particle size analyser on 32 samples, collected at 10 cm intervals in a vertical palaeolake profile, at Bhikiyasain (Ramganga Basin). The results of the grain-size analysis indicate that the size distribution of the sediment is unimodal. The unimodal size distribution of the sediment suggests that the sediment was supplied via fluvial action. The Bhikiyasain Basin (29°43.106’ N; 79°15.682’ E) underwent tectonic activity around 44 ka, resulting in the ponding of the Ramganga river and the formation of palaeolake deposit. Based on grain size analysis, variation in the colour and lithofacies, the entire profile has been divided into 6 different zones (zones 1 to 6). The silt has the highest concentration in all the zones except for zones 1 and 3. Zones with high silt concentration are inferred to represent low energy depositional environments during the time of deposition. The higher amount of sand concentration in zones 1 and 3 represent higher energy depositional environment. For the whole profile, the sorting of the samples varies between 1.1 and 2.0, indicating poor sorting of the samples. The poorly sorted sediment in all six zones represents limited transportation of sediment from the catchment and also suggests that the sediment was deposited in a low energy environment. The ternary plots also signify the dominance of silt followed by sand and clay. The skewness values range from 0.1 to 0.5 which indicates that the samples are symmetrical to very finely skewed. Variability in the skewness values may be due to changes in the intensity of wind and hydrodynamic conditions of the lake. The kurtosis value ranges from 0.9-1.4, indicating the samples are platykurtic, leptokurtic and mesokurtic in nature. Variability in the kurtosis may be due to changes in the flow characteristics of the depositional medium.more » « less
-
Submarine paleoseismology hinges on analyzing stratigraphic records to learn about past earthquakes. Marine microfossils, such as foraminifera, can reveal critical details about the water depth of the sediment remobilized during earthquakes.Although allochthonous foraminifera are typically excluded from age control studies, these faunas are useful in providing insight into the water depth from which a sediment transport deposit originated. As an example, we describe a ~16 m thick Holocene sedimentary deposit first defined by Kioka et al. (2019) and later dated to 1.77 (+0.49/−0.31) ka by Usami et al. (2021) and Schwestermann et al. (2021) based on bulk OC, C-14. Strasser et al. (InPress) identified the event at IODP Expedition 386 Sites M0084, M0086, and M0088, located at hadal depths in the northern Japan Trench. Each site features a basal 1 to2 m thick, fining-upward medium sand to silt with well-defined planar and ripple lamination. The sequence has been interpreted as a turbidite composed of basalsand grading into silty clay that is overlain by a mass transport deposit. Calcareous foraminifera occur in the deposit despite being well below the CCD. Foraminiferal abundance decreases from the basal sand to the fi ne silty clay due to gravitational size sorting. Most displaced foraminifera, including thin-shelled taxa, are moderatelyt o well-preserved, likely due rapid burial, high alkalinity, and low internal friction within the flow. The foraminiferal assemblages are consistent across the three sites. The sandy portion of the deposit is dominated by Elphidium batialis, Uvigerina akitaensis, Nonionellina labradorica, Chilostomellina fi mbriata, and species of Bulimina, indicative of upper to middle bathyal depths (200 to 1000 m). In contrast, the silty clay contains smaller foraminifera like Bolivina, Cassidulina, Stainforthia and Epistominella, suggesting outer neritic to upper bathyal depths (100 to 600 m). Radiocarbon dating of the foraminifers within the basal sand from each site reveals that M0086 (16750 to 16200 cal BP) and M0088 (16650 to 16050 cal BP) have younger source ages compared to M0084 (19350 to 18800 cal BP). These findings indicate that the ~1.77 ka sediment transport event entrained much older strata that had originated in upper to middle bathyal depths and outer neritic to upper bathyal depths.more » « less
-
Mud is a suspension of fine-grained particles (sand, silt, and clay) in water. The interaction of clay minerals in mud gives rise to complex rheological behaviors, such as yield stress, thixotropy, and viscoelasticity. Here, we experimentally examine the flow behaviors of kaolinite clay suspensions, a model mud, using steady shear rheometry. The flow curves exhibit both yield stress and rheological hysteresis behaviors for various kaolinite volume fractions (ϕk). Further understanding of these behaviors requires fitting to existing constitutive models, which is challenging due to numerous fitting parameters. To this end, we employ a Bayesian inference method, Markov chain Monte Carlo, to fit the experimental flow curves to a microstructural viscoelastic model. The method allows us to estimate the rheological properties of the clay suspensions, such as viscosity, yield stress, and relaxation time scales. The comparison of the inherent relaxation time scales suggests that kaolinite clay suspensions are strongly viscoelastic and weakly thixotropic at relatively low ϕk, while being almost inelastic and purely thixotropic at high ϕk. Overall, our results provide a framework for predictive model fitting to elucidate the rheological behaviors of natural materials and other structured fluids.more » « less
