An official website of the United States government
This study details the enhancement of CO2 selectivity in ring opening metathesis polymerization (ROMP) polymers that contain nitrile moieties and micro-pore generating ladder side chains. A material, CN-ROMP homopolymer, with nitriles in the ladder side chains was originally targeted and synthesized, however its low molecular weight and backbone rigidity precluded film formation. As a result, an alternative method was pursued wherein copolymers were synthesized using norbornene (N) and nitrile norbornene (NN). Herein, we report an investigation of the structure–property relationships of backbone functionalization and grafting density on the CO2 transport properties in these ROMP polymers. Nitrile-containing copolymers showed an increase in CO2/CH4 sorption selectivity and a concomitant increase in CO2/CH4 permselectivity when compared to the unfunctionalized (nitrile free) analogs. The stability in CO2 rich environments is enhanced as grafting density of the rigid, pore-generating side chains increases and an apparent tunability of CO2 plasticization pressure was observed as a function of norbornene content. Lower loadings of norbornene resulted in higher plasticization pressure points. Gas permeability in the ROMP copolymers was found to correlate most strongly with the concentration of ladder macromonomers in the polymer chain.
more »
« less
Polymers with Side Chain Porosity for Ultrapermeable and Plasticization Resistant Materials for Gas Separations
Abstract Polymer membranes with ultrahigh CO2permeabilities and high selectivities are needed to address some of the critical separation challenges related to energy and the environment, especially in natural gas purification and postcombustion carbon capture. However, very few solution‐processable, linear polymers are known today that access these types of characteristics, and all of the known structures achieve their separation performance through the design of rigid backbone chemistries that concomitantly increase chain stiffness and interchain spacing, thereby resulting in ultramicroporosity in solid‐state chain‐entangled films. Herein, the separation performance of a porous polymer obtained via ring‐opening metathesis polymerization is reported, which possesses a flexible backbone with rigid, fluorinated side chains. This polymer exhibits ultrahigh CO2permeability (>21 000 Barrer) and exceptional plasticization resistance (CO2plasticization pressure > 51 bar). Compared to traditional polymers of intrinsic microporosity, the rate of physical aging is slower, especially for gases with small effective diameters (i.e., He, H2, and O2). This structural design strategy, coupled with studies on fluorination, demonstrates a generalizable approach to create new polymers with flexible backbones and pore‐forming side chains that have unexplored promise for small‐molecule separations.
more »
« less
- Award ID(s):
- 1410718
- PAR ID:
- 10461469
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- Volume:
- 31
- Issue:
- 21
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Semiconducting donor–acceptor (D–A) polymers have attracted considerable attention toward the application of organic electronic and optoelectronic devices. However, a rational design rule for making semiconducting polymers with desired thermal and mechanical properties is currently lacking, which greatly limits the development of new polymers for advanced applications. Here, polydiketopyrrolopyrrole (PDPP)‐based D–A polymers with varied alkyl side‐chain lengths and backbone moieties are systematically designed, followed by investigating their thermal and thin film mechanical responses. The experimental results show a reduction in both elastic modulus and glass transition temperature (Tg) with increasing side‐chain length, which is further verified through coarse‐grained molecular dynamics simulations. Informed from experimental results, a mass‐per‐flexible bond model is developed to capture such observation through a linear correlation betweenTgand polymer chain flexibility. Using this model, a wide range of backboneTgover 80 °C and elastic modulus over 400 MPa can be predicted for PDPP‐based polymers. This study highlights the important role of side‐chain structure in influencing the thermomechanical performance of conjugated polymers, and provides an effective strategy to design and predictTgand elastic modulus of future new D–A polymers.more » « less
-
Molecular Origin of Strain‐Induced Chain Alignment in PDPP‐Based Semiconducting Polymeric Thin FilmsAbstract Donor–acceptor (D–A) type semiconducting polymers have shown great potential for the application of deformable and stretchable electronics in recent decades. However, due to their heterogeneous structure with rigid backbones and long solubilizing side chains, the fundamental understanding of their molecular picture upon mechanical deformation still lacks investigation. Here, the molecular orientation of diketopyrrolopyrrole (DPP)‐based D–A polymer thin films is probed under tensile deformation via both experimental measurements and molecular modeling. The detailed morphological analysis demonstrates highly aligned polymer crystallites upon deformation, while the degree of backbone alignment is limited within the crystalline domain. Besides, the aromatic ring on polymer backbones rotates parallel to the strain direction despite the relatively low overall chain anisotropy. The effect of side‐chain length on the DPP chain alignment is observed to be less noticeable. These observations are distinct from traditional linear‐chain semicrystalline polymers like polyethylene due to distinct characteristics of backbone/side‐chain combination and the crystallographic characteristics in DPP polymers. Furthermore, a stable and isotropic charge carrier mobility is obtained from fabricated organic field‐effect transistors. This study deconvolutes the alignment of different components within the thin‐film microstructure and highlights that crystallite rotation and chain slippage are the primary deformation mechanisms for semiconducting polymers.more » « less
-
Abstract Organic semiconducting donor–acceptor polymers are promising candidates for stretchable electronics owing to their mechanical compliance. However, the effect of the electron‐donating thiophene group on the thermomechanical properties of conjugated polymers has not been carefully studied. Here, thin‐film mechanical properties are investigated for diketopyrrolopyrrole (DPP)‐based conjugated polymers with varying numbers of isolated thiophene moieties and sizes of fused thiophene rings in the polymer backbone. Interestingly, it is found that these thiophene units act as an antiplasticizer, where more isolated thiophene rings or bigger fused rings result in an increased glass transition temperature (Tg) of the polymer backbone, and consequently elastic modulus of the respective DPP polymers. Detailed morphological studies suggests that all samples show similar semicrystalline morphology. This antiplasticization effect also exists inpara‐azaquinodimethane‐based conjugated polymers, indicating that this can be a general trend for various conjugated polymer systems. Using the knowledge gained above, a new DPP‐based polymer with increased alkyl side chain density through attaching alky chains to the thiophene unit is engineered. The new DPP polymer demonstrates a record lowTg, and 50% lower elastic modulus than a reference polymer without side‐chain decorated on the thiophene unit. This work provides a general design rule for making low‐Tgconjugated polymers for stretchable electronics.more » « less
-
Abstract Conjugated polymers (CPs), characterized by rigid conjugation backbones and flexible peripheral side chains, hold significant promise in various organic optoelectronic applications. In this study, we employ coarse‐grained molecular dynamics (CG‐MD) simulations to investigate the intricate interplay of solvent quality, temperature, and chain architecture (e.g., side‐chain length and molecular mass) on the conformational behaviors of CPs in dilute solutions. Our research uncovers distinctive conformational behaviors under varying solvent conditions, highlighting the versatile nature of polymer chains, which can adopt extended configurations in good solvents and transition to aggregated states in poor solvents. Additionally, the mass scaling exponent , a robust structural descriptor, consistently described CPs behavior across diverse architectures and solvent conditions. Furthermore, our study shows that a CP with longer side‐chain exhibits improved solubility, which is further confirmed by experimental observations. Moreover, our analysis of the shape descriptor provided valuable insights into the symmetry and dimensionality of CPs under varying solvent conditions. These findings offer a comprehensive understanding of conformational behaviors of CPs in dilute solution, which are helpful in guiding the conformational design of polymer for specific applications.more » « less
