skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Electrohydrodynamic Jet Printing Driven by a Triboelectric Nanogenerator
Abstract Electrohydrodynamic jet (e‐jet) printing is a high‐resolution printed electronics technique that uses an electric field to generate droplets. It has great application potential with the rapid development of flexible and wearable electronics. Triboelectric nanogenerators (TENG), which can convert mechanical motions into electricity, have found many high‐voltage applications with unique merits of portability, controllability, safety, and cost‐effectiveness. In this work, the application of a TENG is extended to printed electronics by employing it to drive e‐jet printing. A rotary freestanding TENG is applied as the high‐voltage power source for generating stable ink droplet ejection. The TENG‐driven droplet generation and ejection process and printed features with varied operation parameters are investigated. Results reveal that the jetting frequency could be controlled by the TENG's operation frequency, and high‐resolution printing with feature size smaller than nozzle size is achieved using the setup. Notably, TENG as the power source for e‐jet printing supplies a limited amount of current, which leads to better safety for both equipment and personnel compared to conventional high‐voltage power supplies. With the superiority of TENG in the sense of safety and cost, the work presents a promising solution for the next‐generation of high‐resolution printed electronics and broadens the scope of TENG application.  more » « less
Award ID(s):
1656006
PAR ID:
10461529
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Functional Materials
Volume:
29
Issue:
22
ISSN:
1616-301X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Advanced Materials Technologies)
    Abstract The generation of electronic waste (e‐waste) poses a significant environmental challenge, necessitating strategies to extend electronics’ lifespan and incorporate eco‐friendly materials to enable their rapid degradation after disposal. Foldable electronics utilizing eco‐friendly materials offer enhanced durability during operation and degradability at the end of their life cycle. However, ensuring robust physical adhesion between electrodes/circuits and substrates during the folding process remains a challenge, leading to interface delamination and electronic failure. In this study, electrohydrodynamic (EHD) printing is employed as a cost‐effective method to fabricate the eco‐friendly foldable electronics by printing PEDOT:PSS/graphene composite circuits onto polyvinyl alcohol (PVA) films. The morphology and electrical properties of the printed patterns using inks with varying graphene and PEDOT:PSS weight ratios under different printing conditions are investigated. The foldability of the printed electronics is demonstrated, showing minimal resistance variation and stable electronic response even after four folds (16 layers) and hundreds of folding and unfolding cycles. Additionally, the application of printed PEDOT:PSS/graphene circuit is presented as a resistive temperature sensor for monitoring body temperature and respiration behavior. Furthermore, the transient features and degradation of the PEDOT:PSS/graphene/PVA based foldable electronics are explored, highlighting the potential promise as transient electronics in reducing electronic waste. 
    more » « less
  2. ; ; ; ; ; ; (, Nanoscale)
    Thermoelectric generators (TEGs) convert temperature differences into electrical power and are attractive among energy harvesting devices due to their autonomous and silent operation. While thermoelectric materials have undergone substantial improvements in material properties, a reliable and cost-effective fabrication method suitable for microgravity and space applications remains a challenge, particularly as commercial space flight and extended crewed space missions increase in frequency. This paper demonstrates the use of plasma-jet printing (PJP), a gravity-independent, electromagnetic field-assisted printing technology, to deposit colloidal thermoelectric nanoflakes with engineered nanopores onto flexible substrates at room temperature. We observe substantial improvements in material adhesion and flexibility with less than 2% and 11% variation in performance after 10 000 bending cycles over 25 mm and 8 mm radii of curvature, respectively, as compared to previously reported TE films. Our printed films demonstrate electrical conductivity of 2.5 × 10 3 S m −1 and a power factor of 70 μW m −1 K −2 at room temperature. To our knowledge, these are the first reported values of plasma-jet printed thermoelectric nanomaterial films. This advancement in plasma jet printing significantly promotes the development of nanoengineered 2D and layered materials not only for energy harvesting but also for the development of large-scale flexible electronics and sensors for both space and commercial applications. 
    more » « less
  3. ; ; ; ; (, American Society of Mechanical Engineers)
    Abstract In recent years, inkjet 3D printing has rapidly gained prominence as a disruptive fabrication technique that has witnessed ever-increasing demand in the fields of biomedicine, metal manufacturing, electronics, and functional material production. This innovative approach involves precise deposition of controlled amounts of material onto a moving substrate through a nozzle, achieving impressive sub-millimeter scale resolution by leveraging the concepts of micro-droplet deposition. However, the dynamic nature of the process introduces significant challenges related to consistency and quality control, especially in terms of reproducibility and repeatability. The key input parameters governing this process, such as pressure, voltage, jetting frequency, and duty cycle, are interrelated, entailing the identification of optimal settings in order to realize high-quality jetting. At present, the data collection heavily relies on image-based methods which are inherently slow and often fail to encompass the entirety of the data, making it difficult to determine the relation between the input parameters and jet characteristics. To address this multidimensional difficulty, we developed a unique approach based on light-beam field interruption to collect critical jet data at high speeds. This novel approach collects both temporal and spatial information on droplet evolution, making it a vital tool for enhancing our ability to attain high accuracy and control in inkjet 3D printing. To illustrate the efficacy of our approach, we model the extracted features derived from the process parameters and the extracted data to predict the droplet jetting behavior and droplet size. Specifically, a decision tree classifier is used to predict the jetting behavior and discern between “ideal” and “non-ideal” jetting behaviors. Simultaneously, a linear regression model was employed to predict the droplet size within the “ideal jetting” class based on the interplay of process parameters and the extracted features. The results emphasize the system’s accuracy in capturing the droplet behavior and size using our light-beam field interference sensing module. Furthermore, these findings establish a crucial foundation for the implementation of real-time feedback control loop in the inkjet printing process, promising advancements in adaptability and precision. 
    more » « less
  4. ; ; ; ; (, Advanced Materials Technologies)
    Abstract Electrohydrodynamic jet (e‐jet) printing is a high‐resolution additive manufacturing technique that holds promise for the fabrication of customized micro‐devices. In this companion paper set, e‐jet printing is investigated for its capability in depositing multilayer thin‐films with microscale spatial resolution and nanoscale thickness resolution to create arrays of 1D photonic crystals (1DPC). In this paper, an empirical model for the deposition process is developed, relating process and material parameters to the thickness and uniformity of the patterns. Standard macroscale measurements of solid surface energy and liquid surface tension are used in conjunction with microscale contact angle measurements to understand the length scale dependence of material properties and their impact on droplet merger into uniform microscale thin‐films. The model is validated with several photopolymer inks, a subset of which is used to create pixelated, multilayer arrays of 1DPCs with uniformity and resolution approaching standards in the optics manufacturing industry. It is found that the printed film topography at the microscale can be predicted based on the surface energetics at the microscale. Due to the flexibility in design provided by the e‐jet process, these findings can be generalized for fabricating additional multimaterial, multilayer micro‐ and nanostructures with applications beyond the field of optics. 
    more » « less
  5. ; ; (, 2019 IEEE Energy Conversion Congress and Exposition (ECCE))
    We develop a small and lightweight high-voltage high-gain power converter for applications where weight and size are premium. By driving a Dickson and Cockcroft-Walton voltage multiplier with a megahertz-frequency class-E inverter, we implement two converters, one that achieves 40 V-to-2 kV conversion with 16 cm3 box volume and the other that achieves 3.7 V-to-2.9 kV conversion with 0.2 cm3 box volume and 0.49 g weight. Presented converters achieve comparable or better power density and specific power to those of commercial high-voltage power supplies. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email