Conventional design wisdom prevents both bulk and interfacial toughness to be presented in the same hydrogel, because the bulk properties of hydrogels are usually different from the interfacial properties of the same hydrogels on solid surfaces. Here, a fully‐physically‐linked agar (the first network)/poly(
- Award ID(s):
- 2118988
- NSF-PAR ID:
- 10464089
- Date Published:
- Journal Name:
- Soft Matter
- Volume:
- 19
- Issue:
- 8
- ISSN:
- 1744-683X
- Page Range / eLocation ID:
- 1617 to 1623
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract N ‐hydroxyethyl acrylamide) (pHEAA, the second network), where both networks are physically crosslinked via hydrogen bonds, is designed and synthesized. Bulk agar/pHEAA hydrogels exhibit high mechanical properties (2.6 MPa tensile stress, 8.0 tensile strain, 8000 J m−2tearing energy, 1.62 MJ m−3energy dissipation), high self‐recovery without any external stimuli (62%/30% toughness/stiffness recovery), and self‐healing property. More impressively, without any surface modification, agar/pHEAA hydrogels can be easily and physically anchored onto different nonporous solid substrates of glass, titanium, aluminum, and ceramics to produce superadhesive hydrogel–solid interfaces (i.e., high interfacial toughness of 2000–7000 J m−2). Comparison of as‐prepared and swollen gels in water and hydrogen‐bond‐breaking solvents reveals that strong bulk toughness provides a structural basis for strong interfacial toughness, and both high toughness mainly stem from cooperative hydrogen bonds between and within two networks and between two networks and solid substrates. This work demonstrates a new gel system to achieve superhigh bulk and interfacial toughness on nonporous solid surfaces. -
more » « less
Abstract Architected materials design across orders of magnitude length scale intrigues exceptional mechanical responses nonexistent in their natural bulk state. However, the so‐termed mechanical metamaterials, when scaling bottom down to the atomistic or microparticle level, remain largely unexplored and conventionally fall out of their coarse‐resolution, ordered‐pattern design space. Here, combining high‐throughput molecular dynamics (MD) simulations and machine learning (ML) strategies, some intriguing atomistic families of disordered mechanical metamaterials are discovered, as fabricated by melt quenching and exemplified herein by lightweight‐yet‐stiff cellular materials featuring a theoretical limit of linear stiffness–density scaling, whose structural disorder—rather than order—is key to reduce the scaling exponent and is simply controlled by the bonding interactions and their directionality that enable flexible tunability experimentally. Importantly, a systematic navigation in the forcefield landscape reveals that, in‐between directional and non‐directional bonding such as covalent and ionic bonds, modest bond directionality is most likely to promotes disordered packing of polyhedral, stretching‐dominated structures responsible for the formation of metamaterials. This work pioneers a bottom‐down atomistic scheme to design mechanical metamaterials formatted disorderly, unlocking a largely untapped field in leveraging structural disorder in devising metamaterials atomistically and, potentially, generic to conventional upscaled designs.
-
Dynamic networks containing multiple bond types within a continuous network grant engineers another design parameter – relative bond fraction – by which to tune storage and dissipation of mechanical energy. However, the mechanisms governing emergent properties are difficult to deduce experimentally. Therefore, we here employ a network model with prescribed fractions of dynamic and stable bonds to predict relaxation characteristics of hybrid networks. We find that during stress relaxation, predominantly dynamic networks can exhibit long-term moduli through conformationally inhibited relaxation of stable bonds due to exclusion interactions with neighboring chains. Meanwhile, predominantly stable networks exhibit minor relaxation through non-affine reconfiguration of dynamic bonds. Given this, we introduce a single fitting parameter, ξ , to Transient Network Theory via a coupled rule of mixture, that characterizes the extent of stable bond relaxation. Treating ξ as a fitting parameter, the coupled rule of mixture's predicted stress response not only agrees with the network model's, but also unveils likely micromechanical traits of gels hosting multiple bond dissociation timescales.more » « less
-
more » « less
Abstract Metamaterials are architected cellular networks with solid struts, plates, or shells that constitute the edges and faces of building cells. Certain metamaterial designs can balance light weight and high stiffness requirements, which are otherwise mutually exclusive in their bulk form. Existing studies on these materials typically focus on their mechanical response under uniaxial compression, but it is unclear whether a strut-based metastructure design with high compressive stiffness can exhibit high torsional stiffness simultaneously. Designing lightweight metastructures with both high compressive and torsional stiffnesses could save time and cost in future material development.
To explore the effect of unit cell design, unit cell number, and density distribution on both compressive and torsional stiffnesses, a computational design space was presented. Seven different unit cells, including three basic building blocks: body-centered cubic (BCC), face-centered cubic (FCC), and simple cubic (SC) were analyzed. All samples had a relative density of approximately 7%. It was found that a high compressive stiffness required a high concentration of struts along the loading direction, while a high torsional stiffness needed diagonal struts distributed on the outer face. Increasing unit cell numbers from 1 to 64 affected stiffness by changing the stress distribution globally. Non-uniform metastructure designs with strengthened vertical and diagonal struts towards the outer surface exhibited higher stiffness under either compressive or torsional loading. This study provides valuable guidelines for designing and manufacturing metamaterials for complex mechanical environments.
-
more » « less
Abstract Mechanical metamaterials are architected manmade materials that allow for unique behaviors not observed in nature, making them promising candidates for a wide range of applications. Existing metamaterials lack tunability as their properties can only be changed to a limited extent after the fabrication. Herein, a new magneto‐mechanical metamaterial is presented that allows great tunability through a novel concept of deformation mode branching. The architecture of this new metamaterial employs an asymmetric joint design using hard‐magnetic soft active materials that permits two distinct actuation modes (bending and folding) under opposite‐direction magnetic fields. The subsequent application of mechanical compression leads to the deformation mode branching where the metamaterial architecture transforms into two distinctly different shapes, which exhibit very different deformations and enable great tunability in properties such as mechanical stiffness and acoustic bandgaps. Furthermore, this metamaterial design can be incorporated with magnetic shape memory polymers with global stiffness tunability, which also allows for the global shift of the acoustic behaviors. The combination of magnetic and mechanical actuations, as well as shape memory effects, impart wide tunable properties to a new paradigm of metamaterials.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/d2sm01284g
