An official website of the United States government
Abstract Agglomeration of nanoplastics in waters can alter their transport and fate in the environment. Agglomeration behavior of 4 nanoplastics differing in core composition (red- or blue-dyed polystyrene) and surface chemistry (plain or carboxylated poly[methyl methacrylate] [PMMA]) was investigated across a salinity gradient. No agglomeration was observed for carboxylated PMMA at any salinity, whereas the plain PMMA agglomerated at only 1 g/L. Both the red and the blue polystyrene agglomerated at 25 g/L. Results indicate that both composition and surface chemistry can impact how environmental salinity affects plastic nanoparticle agglomeration. Environ Toxicol Chem 2021;40:1820–1826. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC. Abstract Nanoplastic agglomeration behavior across experimental salinity gradients varies depending on plastic type and surface chemistry. PMMA = poly(methyl methacrylate); PS = polystyrene.
more »
« less
Polymer Characterization of Submerged Plastic Litter from Lake Tahoe, United States
Monitoring plastic litter in the environment is critical to understanding the amount, sources, transport, fate, and environmental impact of this pollutant. However, few studies have monitored plastic litter on lakebeds which are potentially important environments for determining the fate and transport of plastic litter in freshwater basins. In this study, a self-contained underwater breathing apparatus was used for litter collection at the lakebed along five transects in Lake Tahoe, United States. Litter was brought to the surface and characterized by litter type. Plastic litter was subsampled, and polymer composition was determined using attenuated total reflection Fourier transform infrared spectroscopy. The average plastic litter from the lakebed for the five dive transects was 83 ± 49 items per kilometer. The top plastic litter categories were other plastic litter (plastic litter that did not fall in another category), followed by food containers, bottles <2 L, plastic bags, and toys. These results are in line with prior studies on submerged litter, and intervention approaches or ongoing education are needed. The six polymers most frequently detected in the subsamples were polyvinyl chloride, polystyrene/expanded polystyrene, polyethylene terephthalate/polyester, polyethylene, polypropylene, and polyamide. These observations reflect global plastic production and microplastic studies from lake surface water and sediments. We found that some litter subcategories were primarily comprised of a single polymer type, therefore, in studies where the polymer type cannot be measured but litter is categorized, these results could provide an estimate of the total polymer composition for select litter categories.
more »
« less
- PAR ID:
- 10464251
- Publisher / Repository:
- SAGE Publications
- Date Published:
- Journal Name:
- Applied Spectroscopy
- ISSN:
- 0003-7028
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Plastic litter is accumulating in ecosystems worldwide. Rivers are a major source of plastic litter to oceans. However, rivers also retain and transform plastic pollution. While methods for calculating particle transport dynamics in rivers are well established, they are infrequently used to quantify the transport and retention of microplastics (i.e., particles < 5 mm) in flowing waters. Measurements of microplastic movement in rivers are needed for a greater understanding of the fate of plastic litter at watershed and global scales, and to inform pollution prevention strategies. Our objectives were to (1) quantify the abundance of microplastics within different river habitats and (2) adapt organic matter “spiraling” metrics to measure microplastic transport concurrent with fine particulate organic matter (FPOM). We quantified microplastic and FPOM abundance across urban river habitats (i.e., surface water, water column, benthos), and calculated downstream particle velocity, index of retention, turnover rate, and spiraling length for both particle types. Microplastic standing stock was assessed using a habitat‐specific approach, and estimates were scaled up to encompass the study reach. Spatial distribution of particles demonstrated that microplastics and FPOM were retained together, likely by hydrodynamic forces that facilitate particle sinking or resuspension. Microplastic particles had a higher downstream particle velocity and lower index of retention relative to FPOM, suggesting that microplastics were retained to a lesser degree than FPOM in the study reaches. Microplastics also showed lower turnover rates and longer spiraling lengths relative to FPOM, attributed to the slow rates of plastic degradation. Thus, rivers are less retentive of microplastics than FPOM, although both particles are retained in similar locations. Because microplastics are resistant to degradation, individual particles can be transported longer distances prior to mineralization than FPOM, making it likely that microplastic particles will encounter larger bodies of water and interact with various aquatic biota in the process. These empirical assessments of particle transport will be valuable for understanding the fate and transformation of microplastic particles in freshwater resources and ultimately contribute to the refinement of global plastic budgets.more » « less
-
Abstract Microplastics and nanoplastics (collectively, MNPs) are increasingly entering soils, with potential adverse impacts to agriculture and groundwater. Environmental detection, characterization, and quantification of MNPs is difficult and subject to artifacts, often requiring labor-intensive separation from environmental matrices. These analytical challenges make it difficult to conduct experiments investigating specific MNP characteristics influencing their transport and fate, particularly when examining multiple plastic types at low concentrations. By synthesizing a suite of metal-tagged polymers, which are cryomilled to create polydisperse fragmented particle suspensions, single particle ICP-MS (spICP-MS) can be used to quantify MNP particle size and concentration in controlled fate and transport studies. Use of unique metal-polymer pairs enables accurate, simultaneous analysis of multiple MNP types which can be used to track total particle transport and retention within a variety of environmental matrices. This was demonstrated using saturated sand column transport experiments to quantify the movement of two plastics having different properties: tin-tagged polystyrene (Sn-PS) and tantalum-tagged polyvinylpyrrolidone (Ta-PVP). The behavior of these polydisperse, fragmented MNPs was compared to that of fluorescent, carboxylated monodisperse PS spherical microspheres (Fl-PS). Mobility of all MNP types increased with decreasing particle size, and hydrophilic Ta-PVP particles migrated more effectively than the hydrophobic Sn-PS particles. Furthermore, the addition of humic acid (HA) to the carrier solution increased the colloidal stability of both metal-tagged MNP suspensions, resulting in much greater elution from the column than in HA-free deionized water or moderately- hard water (ionic strength = 5mM). This combination of particle synthesis and spICP-MS analysis provides insights into the transport of MNP having physical properties that are representative of environmental MNPs and opens up a broad range of applications for study of MNP environmental fate and transport.more » « less
-
Understanding not only microplastic (MP) concentration but also size distribution, morphology, and polymer profiles is desirable for stormwater, which is an important pathway of entry for MP into the aquatic environment. A challenge is that subsampling is often required for analysis of environmental samples and the impact of subsampling on the stormwater MP concentration determined and the polymer types identified is poorly characterized. To address this, MP were extracted from urban and suburban stormwater, including from green infrastructure. Fourier Transform Infrared microscopy was performed to characterize MP. In addition, particle dimensions and morphology were recorded. Varying the number of 63–250 μm particles subsampled per sample demonstrated the coefficient of variation for concentration (standard deviation/mean) for most samples was <0.3 when 20 particles (0.8–15% of total particles) or <0.2 when 30 particles (1.2–24% of total particles) per sample were analyzed. MP concentrations in the 63–250 μm size class ranged from 15 to 303 MP/L, one to two orders of magnitude greater than observed in previously reported paired samples from the 250–500 or 500–2000 μm size classes. A total of 25 plastic polymer types were observed across samples, more than observed in the large size classes. Spectral signatures of surface oxidation indicative of weathering were observed on most polyethylene, polypropylene, and polystyrene particles, which were the most abundant polymer types. Fragments were the dominant morphology with an average maximum length of 158 ± 92 μm. Overall, these results may help inform subsampling methods and be useful in future exposure assessments for aquatic organisms or design of MP removal technologies for urban and suburban stormwater.more » « less
-
Materials recovery facilities (MRFs) require new automated technologies if growing recycling demands are to be met. Current optical screening devices use visible (VIS) and near-infrared (NIR) wavelengths, frequency ranges that can experience challenges during the characterization of postconsumer plastic waste (PCPW) because of the overly-absorbing spectral bands from dyes and other polymer additives. Technological bottlenecks such as these contribute to 91% of plastic waste never actually being recycled. The mid-infrared (MIR) region has attracted recent attention due to inherent advantages over the VIS and NIR. The fundamental vibrational modes found therein make MIR frequencies promising for high fidelity machine learning (ML) classification. To-date, there are no ML evaluations of extensive MIR spectral datasets reflecting PCPW that would be encountered at MRFs. This study establishes quantifiable metrics, such as model accuracy and prediction time, for classification of a comprehensive MIR database consisting of five PCPW classes that are of economic interest: polyethylene terephthalate (PET #1), high-density polyethylene (HDPE #2), low-density polyethylene (LDPE #4), polypropylene (PP #5), and polystyrene (PS #6). Autoencoders, an unsupervised ML algorithm, were applied to the random forest (RF), k-nearest neighbor (KNN), support vector machine (SVM), and logistic regression (LR) models. The RF model achieved accuracies of 100.0% in both the C–H stretching region (2990–2820 cm −1 ) and molecular fingerprint region (1500–650 cm −1 ). The C–H stretching region was found to be free from additives that were responsible for misclassification in other regions, making it a fruitful frequency range for future PCPW sorting technologies. The MIR classification of black plastics and polyethylene PCPW using ML autoencoders was also evaluated for the first time.more » « less
