Attention:The NSF Public Access Repository (PAR) system and access will be unavailable from 11:00 PM ET on Thursday, October 15th until 12:00 AM ET on Friday, October 16th due to maintenance. We apologize for the inconvenience.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Decoupling Electron‐ and Phase‐Transfer Processes to Enhance Electrochemical Nitrate‐to‐Ammonia Conversion by Blending Hydrophobic PTFE Nanoparticles within the Electrocatalyst Layer
Title: Decoupling Electron‐ and Phase‐Transfer Processes to Enhance Electrochemical Nitrate‐to‐Ammonia Conversion by Blending Hydrophobic PTFE Nanoparticles within the Electrocatalyst Layer
Abstract Electrochemical upcycling of nitrate into ammonia at ambient conditions offers a sustainable synthesis pathway that can complement the current industrial NH3production from the Haber–Bosch process. One of the key rate‐limiting steps is the effective desorption of gaseous or interfacial bubble products, mainly NH3with some minor side products of nitrogen and hydrogen, from the electrode surfaces to sustain available sites for the NO3−reduction reaction. To facilitate the gaseous product desorption from the catalytic sites, hydrophobic polytetrafluoroethylene (PTFE) nanoparticles are blended within a CuO catalyst layer, which is shown to eliminate the undesirable accumulation and blockage of electrode surfaces and largely decouples the electron‐ and phase‐transfer processes. The NH3partial current density normalized by the electrochemically active surface area (ECSA) increases by nearly a factor of 17.8 from 11.4 ± 0.1 to 203.3 ± 1.8 mA cm−2ECSA. The DFT and ab‐initio molecular dynamics simulations suggest that the hydrophobic PTFE nanoparticles may serve as segregated islands to enhance the spillover and transport the gaseous products from electrocatalysts to the PTFE. Thus, a higher ammonia transfer is achieved for the mixed PTFE/CuO electrocatalyst. This new and simple strategy is expected to act as inspiration for future electrochemical gas‐evolving electrode design.  more » « less
Award ID(s):
2016472
PAR ID:
10468033
Author(s) / Creator(s):
; ; ; ;
Publisher / Repository:
Wiley
Date Published:
Journal Name:
Advanced Energy Materials
Volume:
13
Issue:
9
ISSN:
1614-6832
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Materials)
    Abstract The electrochemical reduction of nitrates (NO3−) enables a pathway for the carbon neutral synthesis of ammonia (NH3), via the nitrate reduction reaction (NO3RR), which has been demonstrated at high selectivity. However, to make NH3synthesis cost‐competitive with current technologies, high NH3partial current densities (jNH3) must be achieved to reduce the levelized cost of NH3. Here, the high NO3RR activity of Fe‐based materials is leveraged to synthesize a novel active particle‐active support system with Fe2O3nanoparticles supported on atomically dispersed Fe–N–C. The optimized 3×Fe2O3/Fe–N–C catalyst demonstrates an ultrahigh NO3RR activity, reaching a maximum jNH3of 1.95 A cm−2at a Faradaic efficiency (FE) for NH3of 100% and an NH3yield rate over 9 mmol hr−1cm−2. Operando XANES and post‐mortem XPS reveal the importance of a pre‐reduction activation step, reducing the surface Fe2O3(Fe3+) to highly active Fe0sites, which are maintained during electrolysis. Durability studies demonstrate the robustness of both the Fe2O3particles and Fe–Nxsites at highly cathodic potentials, maintaining a current of −1.3 A cm−2over 24 hours. This work exhibits an effective and durable active particle‐active support system enhancing the performance of the NO3RR, enabling industrially relevant current densities and near 100% selectivity. 
    more » « less
  2. ; ; ; ; ; ; (, Advanced Energy Materials)
    Abstract Electrochemical nitrate reduction reaction (NO3RR) has garnered increasing attention as a pathway for converting a harmful pollutant (nitrate) into a value‐added product (ammonia). However, high selectivity toward ammonia (NH3) is imperative for process viability. Optimizing proton availability near the catalyst is important for achieving selective NH3production. Here, the aim is to systematically examine the impacts of proton availability on NO3RR selectivity in a bipolar membrane (BPM)‐based membrane electrode assembly (MEA) system. The BPM generates a proton flux from the membrane toward the catalyst during electrolysis. Thus, the BPM‐MEA system can modulate the proton flux during operation. The impact of interposer layers, proton scavenging electrolytes (CO32−), and catalyst configurations are also examined to identify which local microenvironments favor ammonia formation. It is found that a moderate proton supply allows for an increase in ammonia yield by 576% when compared to the standard MEA setup. This also results in a high selectivity of 26 (NH3over NO2−) at an applied current density of 200 mA cm−2. 
    more » « less
  3. ; ; ; ; (, Nature Communications)
    Abstract Electrosynthesis, a viable path to decarbonize the chemical industry, has been harnessed to generate valuable chemicals under ambient conditions. Here, we present a membrane-free flow electrolyzer for paired electrocatalytic upcycling of nitrate (NO3−) and chloride (Cl−) to ammonia (NH3) and chlorine (Cl2) gases by utilizing waste streams as substitutes for traditional electrolytes. The electrolyzer concurrently couples electrosynthesis and gaseous-product separation, which minimizes the undesired redox reaction between NH3and Cl2and thus prevents products loss. Using a three-stacked-modules electrolyzer system, we efficiently processed a reverse osmosis retentate waste stream. This yielded high concentrations of (NH4)2SO4(83.8 mM) and NaClO (243.4 mM) at an electrical cost of 7.1 kWh per kilogram of solid products, while residual NH3/NH4+(0.3 mM), NO2−(0.2 mM), and Cl2/HClO/ClO−(0.1 mM) pollutants in the waste stream could meet the wastewater discharge regulations for nitrogen- and chlorine-species. This study underscores the value of pairing appropriate half-reactions, utilizing waste streams to replace traditional electrolytes, and merging product synthesis with separation to refine electrosynthesis platforms. 
    more » « less
  4. ; ; ; (, ECS Meeting Abstracts)
    Electrochemical nitrate reduction reaction (NO3–RR) to ammonia offers a promising solution to environmental and energy challenges, converting a ubiquitous pollutant in aquatic environments into a carbon-free energy carrier and essential chemical feedstock. While considerable research has focused on electrocatalyst development, relatively less attention has been given to device engineering and electroanalytical techniques that could play crucial roles in enhancing the performance of the electrocatalytic NO3–RR, especially at such low concentrations. In this talk, we present our recent work on synthesizing CuxRuyalloy catalysts and investigate their electrocatalytic performance by using various electroanalytical techniques in H-type and membrane-electrode-assembly (MEA) configurations. The results revealed the poor performance of the electrocatalytic NO3–RR at low NO3–concentrations (0.01 M) in H cells due to the mass transfer loss, promoting the competing hydrogen evolution reaction. Pulsed electrolysis has emerged as a forefront technique, characterized by periodically alternating applied potentials between positive and negative, effectively addressing mass transfer limitation and minimizing competing HER. Recent studies highlight the potential of alternating positive potentials to replenish negatively charged NO3− ions near the working electrode, thus enhancing mass transfer efficiency. Furthermore, the integration of continuous flow-cell reactors, specifically zero-gap membrane electrode assembly (MEA) cells augmented with gas diffusion electrodes (GDEs), presents a significant advancement in overcoming mass transport limitations encountered in conventional H-type reactor. In this work, pulsed electrolysis was leveraged as an effective strategy to enhance ammonia yield rate (3-fold) and Faradaic efficiency (FE) (2-fold) compared to the potentiostatic (i.e., constant voltage) condition at low nitrate concentrations, primarily by impacting the local microenvironment. Additionally, an MEA cell was constructed with anionic and bipolar membranes, and a comparative study was conducted by examining cell voltage, selectivity, and energy efficiency. The findings exhibited that membrane type significantly influences cell voltage and system efficiency. Notably, the CuRu alloy catalyst in an MEA system with an anion exchange membrane achieved a FE exceeding 90% at 200 mA cm–2with the highest NH3yield rate of 5.74 ± 0.27 mmol h–1cm–2and stability over 100 h assessed at 600 mA cm–2. The insights gained from this work could inform the rational design of the electrochemical NO3–RR to ammonia with enhanced catalytic performance at low nitrate concentrations. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Functional Materials)
    Abstract The efficient and sustainable production of hydrogen is crucial for the transition to a clean energy future. Ammonia (NH3) is an attractive hydrogen carrier due to its high energy density and safe storage properties. However, conventional ammonia decomposition requires high temperatures, making the process energy‐intensive and costly. Here, a plasmon‐driven photocatalytic approach is presented for ammonia cracking at near‐room temperature, utilizing a plasmonic antenna‐reactor system made by a sharp tip anodic alumina oxide (AAO) array coated with a plasmonic Au film (antenna), decorated with Cu nanoparticles (reactors). This nanostructured catalyst harnesses surface plasmon resonances (SPRs) and generates hot carriers under visible light illumination, significantly enhancing the reaction efficiency. The best AAO@Au@Cu configuration exhibited a hydrogen evolution rate of 227 µmol h−1gCu−1under 1 Sun irradiation at 35 °C. The enhanced activity is due to plasmonic non thermal effects, with the highest catalytic activity observed at 565 nm, corresponding to the SPR mode of the nanostructure. Mechanistic insights, supported by XPS, TOF‐SIMS, and spin‐polarized density functional theory calculations, suggested a multi‐step NH3decomposition pathway involving NH2NH2(hydrazine) and NH‐NH intermediates. This study highlights the potential of plasmonic nanomaterials in revolutionizing low‐temperature NH3decomposition, paving the way for sustainable hydrogen production at solar intensities. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email