An official website of the United States government
The northern part of the Hikurangi margin (HM) regularly experiences shallow slow-slip events (SSEs), possibly extending into the thrust faults of the sedimentary prism. For example, offshore Gisborne SSEs occur every 1-2 years and can last several weeks, during which 5-30 cm of slip may be accommodated. Understanding what controls the timing of such events will help the comprehension of HM deformation and earthquake mechanics in general. One hypothesis for a slow slip mechanism is that the low permeability of the HM prism rocks and the large fluid volumes dragged deep into the subduction zone cause over-pressures along the megathrust and prism splay faults. Overpressure induces SSEs that locally increase permeability. After an SSE, swelling clays and ductile deformation reduce permeability within months, resetting the conditions for developing overpressure. We tested such a hypothesis by measuring the hydraulic permeability of fractured sedimentary rocks making up the core of the accretionary prism. Tests were performed using a newly developed X-ray transparent pressure vessel mounted inside a micro-computed tomography scanner (mCT) that allowed in-situ observation of fracture evolution as a function of confining pressure, time, and exposure to water. The tested rocks were probably subducted to ~7.5 km and are calcareous-glauconitic fine-grained sandstones with a silty matrix from the Late Cretaceous-to-Paleocene Tinui Group containing ~15% vol% of clay minerals. After exposure to high confining pressure and water, the samples regained pre-fracture permeability in tens of days. mCT imagery suggests that fracture clogging, possibly due to clay expansion, controls healing. We propose that slow slip events in the northern HM open fault fractures and allow drainage at the beginning of the slip cycle, followed by fracture clogging due to swelling clays and ductile deformation, with the duration of the cycle regulated by the interplay of these processes.
more »
« less
Deformation-dependent polydimethylsiloxane permeability measured using osmotic microactuators
Silicone membrane permeability to water decreases with increasing deformation. We report a near order of magnitude decrease in the permeability of PDMS using a micro-bulge test geometry that concurrently characterizes its large deformation response.
more »
« less
- Award ID(s):
- 1653676
- PAR ID:
- 10469488
- Publisher / Repository:
- Royal Society of Chemistry
- Date Published:
- Journal Name:
- Soft Matter
- Volume:
- 19
- Issue:
- 31
- ISSN:
- 1744-683X
- Page Range / eLocation ID:
- 6005 to 6017
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Vaselli, Orlando (Ed.)We investigate deformation mechanics of fracture networks in unsaturated fractured rocks from subsurface conventional detonation using dynamic noble gas measurements and changes in air permeability. We dynamically measured the noble gas isotopic composition and helium exhalation of downhole gas before and after a large subsurface conventional detonation. These noble gas measurements were combined with measurements of the subsurface permeability field from 64 discrete sampling intervals before and after the detonation and subsurface mapping of fractures in borehole walls before well completion. We saw no observable increase in radiogenic noble gas release from either an isotopic composition or a helium exhalation point of view. Large increases in permeability were observed in 13 of 64 discrete sampling intervals. Of the sampling intervals which saw large increases in flow, only two locations did not have preexisting fractures mapped at the site. Given the lack of noble gas release and a clear increase in permeability, we infer that most of the strain accommodation of the fractured media occurred along previously existing fractures, rather than the creation of new fractures, even for a high strain rate event. These results have significant implications for how we conceptualize the deformation of rocks with fracture networks above the percolation threshold, with application to a variety of geologic and geological engineering problems.more » « less
-
Abstract Fluid flow and pore‐pressure cycling are believed to control slow slip events (SSEs), such as those that frequently occur at the northern Hikurangi margin of New Zealand. To better understand fluid flow in the forearc system we examined the relationship between several physical properties of Cretaceous‐to‐Pliocene sedimentary rocks from the Raukumara peninsula. We found that the permeability of the deep wedge is too low to drain fluids, but fracturing increases permeability by orders of magnitude, making fracturing key for fluid flow. In weeks to months, plastic deformation, swelling, and possibly not‐yet‐identified mechanisms heal the fractures, restoring the initial permeability. We conclude that overpressures at the northern HM might partly dissipate during SSEs due to enhanced permeability near faults. However, in the months following an SSE, healing in the prism will lower permeability, forcing pore pressure to rise and a new SSE to occur.more » « less
-
Abstract Results of ice-stream models that treat temperate ice deformation as a two-phase flow are sensitive to the ice permeability. We have constructed and begun using a custom, falling-head permeameter for measuring the permeability of temperate, polycrystalline ice. Chilled water is passed through an ice disk that is kept at the pressure-melting temperature while the rate of head decrease indicates the permeability. Fluorescein dye in the water allows water-vein geometry to be studied using fluorescence microscopy. Water flow over durations of seconds to hours is Darcian, and for grain diameter d increasing from 1.7 to 8.9 mm, average permeability decreases from 2 × 10 −12 to 4 × 10−15 m 2. In tests with dye on fine ( d= 2 mm) and coarse (d = 7 mm) ice, average area-weighted vein radii are nearly equal, 41 and 34 μm, respectively. These average radii, if included in a theory slightly modified from Nye and Frank (1973), yield permeability values within a factor of 2.0 of best-fit values based on regression of the data. Permeability values depend on d −3.4, rather than d−2 as predicted by models if vein radii are considered independent of d. In future experiments, the dependence of permeability on liquid water content will be measured.more » « less
-
Abstract We use heat flux measurements colocated with seismic reflection profiles over a buried basement high on the Juan de Fuca plate ∼25 km seaward of the deformation front offshore Oregon to test for the presence of hydrothermal circulation in the oceanic crust. We also revisit heat flux data crossing a buried basement high ∼25 km seaward of the deformation front ∼150 km north, offshore Washington. Seafloor heat flux is inversely correlated with sediment thickness, consistent with vigorous hydrothermal circulation in the basement aquifer homogenizing temperatures at the top of the basement. Heat flux immediately above the summit of the basement highs is greater than expected solely from conduction. Fluid seepage at rates of ∼2.6–5.4 cm yr−1in a 1–1.5 km‐wide conduit through ∼800–1,300 m thick sediment sections above these basement highs can explain these observations. Observations of thermally significant fluid seepage through sediment >225 m thick on oceanic crust are unprecedented. High sediment permeability, high fluid overpressure in the basement, or a combination of both is required to drive fluid seepage at the observed rates. We infer that rapid seepage occurs because the basement highs rise above the low permeability basal sediment with their tops protruding into the base of high permeability Nitinat or Astoria Fan sediment. Seepage from basement highs penetrating into the submarine fans can affect the thermal state of crust entering the subduction zone.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D2SM01666D
